SLB242 - Projector Accessories Chief - Free user manual and instructions

Product Type	Interface Bracket for Projector Mount
Brand	Chief
Model	SLB242
Compatibility	Chief® Series Projector Mounts (SSB, SSM, SLB, SLM styles)
Color	Black
Material	Steel
Dimensions (approx.)	200 x 100 x 20 mm
Weight (approx.)	0.5 kg
Included Items	Interface bracket, 3x M6x10mm screws, 4x 10-24 thumb nuts (for SLB/SSB), 3x M6 washers, All-Points Security Kit with 5/32" hex key
Installation Hardware	Use only supplied hardware; do not substitute
Mounting Hole Pattern	Compatible with standard projector threaded inserts
Security Feature	All-Points Security Kit included for theft deterrence
Maintenance	Wipe clean with a dry cloth; no liquid cleaners
Safety Warnings	Improper installation can cause equipment falling and serious injury; do not over-tighten screws
Warranty	Refer to Chief warranty policy
Manufacturer	Milestone AV Technologies (Chief Manufacturing)
Country of Origin	USA
RoHS Compliant	Yes
Qty per Package	1

Frequently Asked Questions - SLB242 Chief

What is the Chief SLB242 interface bracket used for?

The SLB242 is an interface bracket designed to attach a projector to a Chief^® Series Projector Mount. It is compatible with SSB, SSM, SLB, and SLM bracket styles.

What is included in the SLB242 package?

The package includes (1) interface bracket, (3) M6x10mm Phillips pan head machine screws, (4) 10-24 thumb nuts (for SLB/SSB models), (3) M6 washers, (1) All-Points Security Kit, and (1) 5/32" security hex key.

How do I install the SLB242 bracket on my projector?

First, screw thumb nuts onto the 10-24 screws (only for SLB/SSB brackets). Turn the projector upside down, align the bracket with the threaded inserts, and secure using M6 screws and washers. Tighten all fasteners. See the manual for detailed steps and torque specifications.

Can I use different screws than those provided?

No. The manual warns not to substitute hardware. Use only the screws supplied by the manufacturer to avoid equipment damage or personal injury.

What is the All-Points Security Kit for?

The security kit allows you to replace standard screws with security screws to deter theft. It includes a 5/32" security hex key and instructions for installation.

Is the SLB242 compatible with all projectors?

It is compatible with projectors that have standard threaded inserts (usually M6) in the bottom. The bracket is designed for use with Chief^® mounts; check your projector's mounting hole pattern.

What is the weight capacity of the SLB242?

The manual does not specify a weight capacity. The bracket is intended for use with Chief^® projector mounts, which have their own load limits. Ensure the total weight of the projector does not exceed the mount's rating.

How should I clean the SLB242 bracket?

Clean with a dry cloth. Do not use liquid cleaners or solvents, as they may damage the coating.

What should I do if a part is missing from my kit?

Contact Chief Customer Service immediately. Do not attempt to install the bracket with missing parts.

Are there any torque specifications for the screws?

The manual does not provide specific torque values. However, it warns against over-tightening which can damage parts. Tighten screws securely but without excessive force.

USER MANUAL SLB242 Chief

INSTALLATION INSTRUCTIONS

SSB-242, SSM-242, SLB-242 and SLM-242 Interface Brackets

SSB-242, SSM-242, SLB-242 and SLM-242 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

(1) Interface Bracket (3) Screw, Phillips Pan Head, Machine, M6 x 10mm
(4) 10-24 Thumb Nuts ** (3) Washer, M6
(1) All-Points Security Kit (1) 5/32" Security Hex Key

**Only used when installing SLB/SSB interface brackets.
NOTE: Specific to SSB-style and SSM-style interface bracket installation, all appropriate screws come pre-installed as reflected in the encircled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style interface bracket installation.

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface brackets.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.
2. Turn projector upside down on a flat surface.
3. Place the interface bracket onto the bottom of the projector and align the mounting holes in the bracket with the threaded inserts in the bottom of the projector.
4. Position M6 mounting screws with M6 washers into the threaded inserts in bottom of projector. Tighten all fasteners at this time, securing the bracket to the projector.

NOTE: Security screws can be substituted when mounting interface bracket to projector by using the parts and installation instructions in the All-Points Security Kit.

Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

CHIEF®

Our Mounts. Your Vision.

Chief Manufacturing, a products division of Milestone AV Technologies

8401 Eagle Creek Parkway, Savage, MN 55378

• P: 800.582.6480 / 952.894.6280 • F:877.894.6918 / 952.894.6918

8802-002009 Rev01

©2009 Milestone AV Technologies,

a Duchossois Group Company

05/09