CAM010 - Dash cam CALIBER - Free user manual and instructions

Product Type	Dash Cam (Rear View Camera)
Brand	Caliber
Model	CAM010
Installation	Screw mounting at rear of vehicle
Power Supply	12V DC from vehicle electrical system
Connection	Ground (GND) and reversing lamp positive wire
Video Output	Composite video cable to monitor/car stereo
Activation	Automatic when vehicle reverses
Dimensions (approx.)	4.5 x 3.5 x 3 cm
Weight (approx.)	50 g
Housing Material	Black plastic
Maintenance	Clean lens with soft cloth; check cable connections regularly
Safety	Only connect to 12V system; use fuse if appropriate
Spare Parts / Repairability	Mounting screws and video cable available; lens not user-repairable
Manual Included	Quick start guide (PDF available online)

Frequently Asked Questions - CAM010 CALIBER

How do I install the CALIBER CAM010 dash cam?

Find a suitable location at the rear of your vehicle, attach the camera with the provided screws. Connect the black wire to vehicle ground (GND) and the positive wire to the reversing lamp power. Connect the video cable to your monitor's video input. The camera activates automatically when you shift into reverse.

What power supply does the CAM010 require?

It requires 12V DC from the vehicle's electrical system. Do not connect to higher voltage.

Why is my camera not working after installation?

Check that the power wires are correctly connected: black to ground (GND), positive to the reversing lamp wire. Ensure the reversing lamp is working. Also verify the video cable is firmly plugged into both the camera and monitor.

How do I clean the camera lens?

Use a soft, dry cloth to gently wipe the lens. Avoid using liquids or abrasive cleaners that could damage the lens coating.

Can I use this camera as a front-facing dash cam?

The CAM010 is designed as a rear view camera and is intended to activate with the reversing signal. It is not optimized for continuous front recording.

What type of video output does the CAM010 use?

It outputs composite video via a standard RCA-type cable. This can be connected to any monitor or car stereo with a compatible video input.

Is the camera weatherproof?

The CAM010 is designed for interior or under-bumper use. It should not be exposed to heavy rain or direct water jets.

How long is the video cable?

The included video cable is approximately 6 meters (20 feet) long, sufficient to route from the rear of the vehicle to the front dashboard.

Can I replace the mounting screws if lost?

Yes, standard M4 screws can be used. Ensure they are not too long to avoid damaging internal components.

Does the camera have night vision?

The CAM010 does not include built-in infrared LEDs, but it can work with low light from reversing lamps. For dark conditions, additional lighting is recommended.

USER MANUAL CAM010 CALIBER

Close-up of a black mechanical sensor or camera component with mounting base (no visible text or symbols)

CAM OIO

Quick Start Guide

Find a suitable location (depending on vehicle type) in the area at the rear, and attach the camera with the attached screws.

FR·Installation:

GB • Connecting the camera:

Connect the cable to the vehicle ground (GND).

The positive cable should preferably be connected to the power of reversing lamp. The camera automatically activates when reversing.

Lay a video cable to the video input on your monitor/car stereo.