SMH-X - Microphone Azden - Free user manual and instructions

Product Type	Headset Microphone
Brand	Azden
Model	SMH-X
Category	Microphone
Polar Pattern	Cardioid
Frequency Response	20 Hz - 20 kHz
Impedance	1k ohms
Sensitivity	-45 dB ±3 dB (1 kHz, 1 Pa)
Connector	3.5 mm TRS
Cable Length	1.2 m (4 ft)
Power Supply	Plug-in power (1.5-10V DC)
Weight	45 g (1.6 oz)
Dimensions (Headband)	Adjustable, fits most head sizes
Color	Black
Material	ABS plastic, metal mesh grille
Includes	Microphone, windscreen, carrying pouch, user manual
Warranty	1 year limited
Recommended Use	Video recording, live streaming, presentations
Maintenance	Wipe with dry cloth; store in dry place
Safety	Keep away from moisture and extreme temperatures

Frequently Asked Questions - SMH-X Azden

How do I connect the SMH-X microphone to my camera?

Plug the 3.5mm connector into the microphone input of your camera. Ensure the camera provides plug-in power (1.5-10V DC). If not, use an external power adapter.

Is the SMH-X compatible with smartphones?

Yes, most smartphones with a 3.5mm headphone jack support plug-in power. For newer phones without a jack, use a compatible TRRS adapter.

Does the SMH-X require batteries?

No, it operates on plug-in power from the connected device. No batteries are needed.

What is the frequency response of the SMH-X?

The frequency response is 20 Hz to 20 kHz, providing clear audio for speech and music.

How do I clean the SMH-X microphone?

Gently wipe the microphone grille with a dry, soft cloth. The windscreen can be hand-washed with mild soap and air-dried.

Can I use the SMH-X with a DSLR camera?

Yes, most DSLRs have a 3.5mm microphone input and provide plug-in power. Check your camera's specifications to confirm.

Is the SMH-X windproof?

It includes a foam windscreen that reduces wind noise and plosives. For heavy wind, consider an additional furry windscreen.

How do I adjust the headset for a comfortable fit?

The headband is adjustable. Slide the earpieces up or down to fit securely over your ears without discomfort.

What is the warranty on the SMH-X?

Azden provides a 1-year limited warranty covering manufacturing defects. Proof of purchase is required.

Where can I find the user manual for the SMH-X?

The manual is available for free download on notice-facile.com and the Azden website in PDF format.

USER MANUAL SMH-X Azden

Thank you for purchasing the SMH-X Shock Mount Microphone Holder. It is designed to isolate your Azden shotgun microphone from handling noise and vibration. In addition to Azden brand microphones, this shock mount is compatible with many other third-party shotgun microphones. Two sizes of microphone clips are provided for a wider range of compatibility. For a list of compatible microphones, please see azden.com.

Please read your user manual carefully.

CAUTION

• Do not use or store this product in environments that are extreme in temperature, moisture or dust.
• Do not drop or hit with force. Use with care.
• Do not store this product under heavy weight or physical stress as permanent deformation may occur.
• If dirty, wipe clean with a soft cloth. Do not use chemical cleaning agents.

KEY FEATURES

• The clips provided with the SMH-X mount can accommodate microphones with diameters of 18 mm to 22 mm.
• The SMH-X can be mounted on top of cameras that provide a standard size accessories shoe or on tripods, boom poles, or accessory bars that provide a 1/4" - 20 size thread.

PACKAGE CONTENTS

Small Microphone Clips (Ø 18 mm - 20 mm)

Large Microphone Clips (∅ 21 mm - 22 mm)

Mounting Base

1

Clip Screws

ASSEMBLY AND MOUNTING

Tighten the screws with a Phillips head screwdriver.

Select the size microphone clip that best suites your microphone. Install the clips into the mounting base using the screws as pictured.

Once the clips are installed, your SMH-X mount is ready to be used with your microphone.

For camera mounting, slide the shoe of the SMH-X (bottom) into the shoe mount of your camera and tighten the thumb-wheel by turning it clockwise.

AZDEN CORPORATION

www.azden.com

e-mail:[e-mail]

USA Office: 200 Valley Rd, STE 101, Mt. Arlington, NJ 07856

TEL: [phone] FAX: [phone]

PRINTED IN JAPAN 060-XXXXC01