EPB-600 - Headphones Vorago - Free user manual and instructions
Find the device manual for free EPB-600 Vorago in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless On-Ear Headphones |
| Brand | Vorago |
| Model | EPB-600 |
| Dimensions (approx) | 17 x 7 x 18 cm |
| Weight | 180 g |
| Battery Capacity | 300 mAh |
| Playback Time | Up to 15 hours |
| Charging Time | Approximately 2 hours |
| Charging Port | Micro USB |
| Bluetooth Version | 5.0 |
| Wireless Range | Up to 10 meters |
| Driver Diameter | 40 mm |
| Frequency Response | 20 Hz - 20 kHz |
| Impedance | 32 Ω |
| Noise Cancellation | Passive |
| Controls | Volume, Play/Pause, Next/Previous Track |
| Microphone | Built-in for calls |
| Foldable Design | Yes |
| Cleaning Instructions | Wipe with a soft dry cloth. Do not use liquids |
| Safety Warnings | Do not expose to moisture. Keep away from heat sources. |
| Spare Parts Availability | Ear pads and charging cable available from manufacturer |
| Warranty | 1 year limited warranty |
Frequently Asked Questions - EPB-600 Vorago
How do I pair the EPB-600 with my phone?
Turn on the headphones by pressing and holding the power button until the LED flashes. Then enable Bluetooth on your phone and select 'Vorago EPB-600' from the list. Once connected, the LED will turn solid blue.
How long does the battery last?
The EPB-600 offers up to 15 hours of playback time on a full charge. Actual battery life may vary based on volume level and usage.
Can I use the headphones while charging?
Yes, you can use the headphones in wired mode via the included audio cable while charging, but Bluetooth playback is not possible during charging.
How do I clean the ear pads?
Gently wipe the ear pads with a soft, dry cloth. Do not use water, cleaning solvents, or abrasive materials as they may damage the pads.
What to do if the headphones won't turn on?
First, charge the headphones for at least 30 minutes. Then press and hold the power button for 3-5 seconds. If still unresponsive, try resetting by pressing the power button for 10 seconds.
Are the headphones compatible with all Bluetooth devices?
The EPB-600 uses Bluetooth 5.0 and is compatible with most devices supporting A2DP, AVRCP, and HSP profiles, including smartphones, tablets, and computers.
How do I adjust the volume?
Use the volume up/down buttons on the earcup. A short press adjusts volume step by step; a long press may skip tracks (depending on mode).
What does the LED indicator mean?
A flashing blue and red LED indicates pairing mode. Solid blue means connected. Flashing red indicates low battery. Solid red while charging, and turns off when fully charged.
Can I replace the ear pads?
Yes, ear pads are replaceable. Contact Vorago customer support or authorized service centers to purchase genuine replacement pads.
How to reset the headphones?
To reset, press and hold the power button for 10 seconds until the LED turns off and then back on. This clears all paired devices and restores factory settings.
User questions about EPB-600 Vorago
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual EPB-600 - Vorago and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EPB-600 by Vorago.