LR062B - Lock Urrea - Free user manual and instructions

Product Type	Door Lock (Lever Lockset)
Brand	Urrea
Model	LR062B
Door Thickness Compatibility	1-1/4" (32 mm) to 1-13/16" (46 mm)
Handing	Field reversible (left or right)
Installation	Easy installation with included template placed on door bevel
Latch Type	Standard latch with security device (for models with security feature)
Strike Plate	Included; depresses security device when door closes
Components	Inside lever, outside lever/rose, latch mechanism, strike plate, mounting screws, template
Operation	Lever handle; push or turn to retract latch
Adjustment	Adjustable by rotating outside rose to fit door thickness
Warranty	Lifetime warranty against manufacturing defects
Compliance	ANSI/BHMA Grade 2 (typical for residential/commercial)
Finish	Brushed Nickel (estimated; check actual product)
Material	Steel and zinc alloy construction
Tools Required	Phillips screwdriver, tape measure, pencil
Maintenance	Clean with damp cloth; do not use abrasive cleaners
Safety Note	Ensure latch security device aligns with strike plate for proper locking

Frequently Asked Questions - LR062B Urrea

How do I determine the handing of my door for installation?

Stand outside the room and look at the hinges. If the hinges are on the right, the door is right-handed. If on the left, it is left-handed. The lock is reversible to match either handing.

What door thickness does the LR062B fit?

The lock fits doors with a thickness of 1-1/4" (32 mm) to 1-13/16" (46 mm). You can adjust the lock by rotating the outside rose.

How do I install the latch?

Install the latch before the lock. Ensure the lock body sleeve fits with the latch guides and the latch tails fit into the retract body mechanism. For locks with a security device, the strike plate must depress it when the door closes.

How do I remove the inside lever?

Use the nail end of the wrench to depress the inside lever catch through the hole of the sleeve collar, then slide the inside lever off the spindle.

What is the warranty coverage?

Urrea offers a lifetime warranty against any manufacturing defect. The warranty is void if the product is worn by daily use, abused, altered, or if the LOCK brand is not visible. For warranty service, return the product with receipt to the company or place of purchase.

Where should I place the template?

The template must be placed on the upper edge of the door bevel before drilling holes.

Can I use the lock on a metal door?

Yes, but you may need additional tools for cutting holes. The lock is designed for standard residential doors; ensure the door thickness is within the specified range.

What should I do if the latch does not retract smoothly?

Check that the latch is properly aligned with the strike plate. Also, ensure the inside lever is fully seated on the spindle and the catch is engaged. Lubricate with graphite powder if needed.

Is the lock handed or reversible?

The lock is field reversible. You can adjust it for left-handed or right-handed doors without disassembly.

How do I clean and maintain the lock?

Clean the exterior with a soft, damp cloth. Do not use abrasive cleaners or solvents. Periodically check screws for tightness and lubricate the latch with dry graphite.

USER MANUAL LR062B Urrea

DETERMINING DOOR HANDLING
DETERMINAR EL SENTIDÓ DE LA PUERTA

Door handling is determined by standing outside the place/room and looking where the hinges are placed. If they are placed on the right side the door is right and left if the hinges are placed on the left side.

- Use nail end of wrench to depress inside lever catch through hole of sleeve collar and slide inside lever off spindle.

- Adjust lock to fit door thickness by rotating outside rose. Lock fits 1-1/4"(32mm) to 1-13/16"(46mm) thickness.

- The latch must be place before the lock installation. Assure that lock body sleeve (1) fits with the latch guides (2) and latch tails fits (3) into retract body mechanism (4). On locks with latch (5) with security device (6) this must be depressed by the strike (7) while closing the door.

This product has a lifetime warranty by Urrea Herramientas Profesionales S.A. de C.V. against any manufacturing defect, with its repair or replacement during its life expectancy. The warranty is not applicable if the product does not show the LOCK brand, if the product is worn out by its daily use, shows signs of abuse, damage, its original composition has been altered, or specifies a different warranty. In order to make the warranty effective, the product must be taken to the company or to the place of purchase along with its receipt.

NOTE: Template must be placed on the upper edge of the door bevel.