PRO-700 - Microphone Soundtrack - Free user manual and instructions

Product Type	Dynamic Microphone
Brand	Soundtrack
Model	PRO-700
Dimensions (approx.)	50 mm diameter x 200 mm length
Weight	0.3 kg
Power Supply	None (passive, no battery or phantom power required)
Polar Pattern	Cardioid
Frequency Response	50 Hz - 15 kHz
Impedance	600 ohms
Output Connector	3-pin XLR
Main Functions	Vocal recording, live performance, public address
Maintenance & Cleaning	Wipe with a soft damp cloth; avoid solvents
Safety Precautions	Keep away from moisture and extreme temperatures; do not drop
Spare Parts & Repairability	Replaceable windscreen; no user-serviceable parts inside
General Information	Professional-grade microphone suitable for stage and studio

Frequently Asked Questions - PRO-700 Soundtrack

How do I connect the PRO-700 microphone to my mixer?

Use a standard XLR cable to connect the microphone to a mixer or audio interface with an XLR input. The microphone does not require phantom power as it is a dynamic model.

Does the PRO-700 require a battery?

No, the PRO-700 is a dynamic microphone and operates without any battery or external power source.

How can I reduce feedback during live performances?

Position the microphone close to the sound source, use a cardioid polar pattern to reject off-axis sound, and avoid pointing the microphone directly at speakers.

What is the best way to clean the PRO-700?

Gently wipe the microphone body and grille with a soft, slightly damp cloth. Do not use harsh chemicals or submerge the microphone in water.

Can I use the PRO-700 for recording instruments?

Yes, the PRO-700 can be used for recording instruments such as guitar amplifiers, drums, and brass, though it is primarily designed for vocals.

What type of cable does the PRO-700 use?

The microphone is equipped with a 3-pin XLR output. Use a standard male-to-female XLR microphone cable.

Is the PRO-700 compatible with wireless systems?

No, the PRO-700 is a wired microphone. For wireless use, you would need a separate wireless transmitter and receiver system.

How do I replace the windscreen?

Gently pull the old windscreen off the microphone grille and push a new one into place. Ensure it fits snugly.

What is the frequency response of the PRO-700?

The frequency response is 50 Hz to 15 kHz, suitable for clear vocal reproduction.

Can I mount the PRO-700 on a stand?

Yes, the microphone has a standard 5/8-inch thread mount and can be attached to any microphone stand or boom arm.

USER MANUAL PRO-700 Soundtrack

MANUAL INSTRUCTIVO DEL MICRÓFONO MODELO PRO-700

IMPORTADO POR

PARTES ELECTRÓNICAS, S.A. DE C.V.

SAN ANDRES ATOTO 149, SAN ESTEBAN

NAUCALPAN, EDO. DE MEXICO

53550

PRO-700

DEPTO. DE SERVICIO:

SAN ANDRES ATOTO 149

TEL. [phone]

ANTES DE CONECTAR ESTA UNIDAD LEA CUIDADOSAMENTE ESTE INSTRUCTIVO

ADVERTENCIAS

1. Cada vez que utilice su micrófono, revise el estado de los conectores del cable, ya que por el uso pueden sufrir deterioros en las conexiones internas, que ocasionan fallas del micrófono
2. Al desconectar el micrófono de su equipo, no lo haga con las manos mojadas
3. Al desconectar el micrófono de su equipo, no lo jale del cable, sujete el mango del conector
4. Evite manejar bruscamente o tirar su micrófono para evitar golpes que pueden ocasionar roturas
5. NO utilice solventes químicos para la limpieza de su micrófono, sólo utilice un lienzo húmedo
6. NO permita que penetren líquidos a esta unidad
7. Cuando no utilice su micrófono ó lo transporte, use la caja de empaque.
8. NO trate de reparar esta unidad por su cuenta, en caso de falla acuda al departamento. de servicio, (tel. [phone]) y haga efectiva la vigencia de su garantía.

OPERACIÓN

1. Verifique que la entrada del amplificador sea de la misma impedancia de su micrófono
2. Asegúrese de que antes de conectar el micrófono al amplificador, que el control de volumen este al mínimo
3. Para probar el funcionamiento del micrófono, no lo golpee ni sople, sencillamente hable frente a el.
4. NO coloque el micrófono frente o demasiado cerca de los altavoces, pues se genera una retroalimentación acústica en forma de aullido que aparte de ser molesto a la audición puede provocar severos daños al amplificador y a los altavoces, sobre todo si se utilizan altos niveles de volumen.

ESPECIFICACIONES.

Tipo Dinámico Unidireccional

Respuesta en frecuencia 50Hz-13kHz

Sensibilidad - 52 ± 2dB

Impedancia 400 Ω ± 30%

Conector 6.3mm a Cannon

SOUND TRACK