SLE 50F14TCS - Television SENCOR - Free user manual and instructions

Product Type	Television
Brand	Sencor
Model	SLE 50F14TCS
Screen Size	50 inches (127 cm)
Display Technology	LED
Resolution	1920 x 1080 (Full HD)
Refresh Rate	60 Hz
Dimensions (without stand)	Approx. 1120 x 650 x 80 mm (W x H x D)
Weight (without stand)	Approx. 10 kg
Power Consumption (operating)	Approx. 70 W
Power Consumption (standby)	< 0.5 W
Video Inputs	HDMI x2, USB x1, VGA (optional)
Audio Output	3.5mm Jack, Optical (optional)
Tuner	DVB-T/T2/C/S2
Remote Control	Yes (batteries included)
Wall Mount Compatibility	VESA 200 x 200 mm
Operating Temperature	5°C to 35°C
Safety Certification	CE, RoHS
Package Contents	TV, Stand, Remote, Batteries, Power Cord, User Manual

Frequently Asked Questions - SLE 50F14TCS SENCOR

How do I connect external devices to the TV?

Use the HDMI ports for devices like game consoles or Blu-ray players. For USB drives, use the USB port. Connect antennas to the RF input.

How do I perform a factory reset?

Press Menu on the remote, navigate to Settings > System > Reset, then confirm by entering the PIN (default 0000).

Why is there no sound?

Check if the volume is muted or set too low. Ensure external speakers are properly connected. Go to Sound Settings and verify the audio output is set to TV Speaker.

How do I clean the screen?

Turn off the TV and unplug it. Use a soft, dry microfiber cloth. Do not spray liquids directly; dampen the cloth slightly if needed. Avoid harsh chemicals.

Can I mount this TV on the wall?

Yes, the TV supports VESA 200 x 200 mm wall mounts. Use appropriate screws and ensure the wall can support the weight (approx. 10 kg).

What remote control codes work with this TV?

Universal remote codes for Sencor often start with 1234 or 4567. Refer to the user manual for specific codes. Alternatively, try auto-search.

How do I update the firmware?

Visit the Sencor website, download the latest firmware for SLE 50F14TCS onto a USB drive. Insert the drive into the TV, go to Settings > Software Update and follow prompts.

Why is the picture flickering?

Check cable connections. Adjust Picture Mode settings. Ensure the Power Saving feature is off. If issue persists, reset to factory defaults.

How do I adjust the picture settings?

Press Menu, go to Picture. Adjust brightness, contrast, color, sharpness. Select Picture Mode: Standard, Vivid, Cinema, etc.

What should I do if the remote control stops working?

Replace batteries with fresh ones. Point directly at the IR sensor. If still not working, use the power button on the TV. Reset remote by removing batteries and pressing any button for 5 seconds.

USER MANUAL SLE 50F14TCS SENCOR

SENCOR®

SLE 50F14TCS

ENERGIA · ЕНЕРГИЯ ENEРГЕІА · ENERGIJA ENERGY · ENERGIE ENERGI

93 Watt

136 kWh/annum

127 cm

50 inch

2010/1062 - 2017