Nemco 80435-36-SLT - Hot Dog Maker

80435-36-SLT - Hot Dog Maker Nemco - Free user manual and instructions

Find the device manual for free 80435-36-SLT Nemco in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Nemco 80435-36-SLT - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Countertop Hot Dog Roller Grill
Brand Nemco
Model 80435-36-SLT
Number of Rollers 36
Roller Material Stainless Steel
Temperature Control Adjustable Thermostat
Power Supply 120 V, 60 Hz
Wattage 1500 W
Dimensions (W x D x H) 28 x 16 x 12 in
Weight 40 lb
Drip Pan Removable, Stainless Steel
Safety Features Cool-touch Handles, Stable Non-Skid Feet
Cleaning Removable Drip Tray, Wipe Rollers with Damp Cloth
Spare Parts Availability Rollers, Thermostat, Heating Elements, Drip Pan
Certifications ETL, NSF

Frequently Asked Questions - 80435-36-SLT Nemco

How do I clean the rollers?
Turn off and unplug the unit. Allow rollers to cool completely. Wipe with a damp, non-abrasive cloth. For stubborn residue, use a mild detergent. Do not submerge in water.
Can I use the roller grill for foods other than hot dogs?
Yes, you can cook sausages, bratwurst, or similar cylindrical foods. Ensure they are evenly sized for consistent cooking.
How do I adjust the temperature?
Turn the thermostat knob to the desired setting. Typical hot dog cooking temperature is between 250°F and 300°F. Allow 15 minutes to preheat.
What should I do if the rollers stop turning?
First, check power supply and ensure the unit is plugged in. If the motor is jammed, turn off and unplug, then manually rotate rollers to free any obstruction. If problem persists, contact Nemco service.
Is it safe to leave the grill unattended while operating?
No, never leave the appliance unattended while it is plugged in or in use. Monitor cooking to prevent overheating or fire hazards.
Where can I find replacement parts?
Replacement parts such as rollers, heating elements, and drip pans are available through Nemco authorized dealers or their website. Refer to the manual for part numbers.
How do I install the dividers?
Place the bracket on the front of the grill. Insert divider into bracket slots, then lower the back so it rests on the roller grill. Ensure it does not rest on the drip pan. Repeat for additional dividers.
What is the warranty coverage?
Nemco typically offers a limited warranty covering defects in materials and workmanship. Check your product manual or contact Nemco for specific terms and duration.
How long does it take to preheat?
Preheating takes approximately 15-20 minutes depending on the temperature setting. The indicator light (if equipped) will turn off when ready.
What type of hot dogs work best?
Standard-sized hot dogs (about 6 inches) work best. Avoid oversized or irregularly shaped sausages that may not rotate evenly.

User questions about 80435-36-SLT Nemco

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Hot Dog Maker in PDF format for free! Find your manual 80435-36-SLT - Nemco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 80435-36-SLT by Nemco.

USER MANUAL 80435-36-SLT Nemco

Hand placing a white object onto a metal grill top (no visible text or symbols)

Hand placing a flat grater into a metal rack, with visible branding and control buttons (no text or symbols on the grater itself)

Industrial conveyor system with rollers and a close-up inset showing a metallic roller assembly (no visible text or symbols)

Exterior view of a stainless steel hot dog grater with cooling fins and red control knobs (no text or symbols visible)

80435- ( ) Divider Kit Instruction Sheet

1.) Put bracket on the front of the grill as shown.

2.) Insert divider into the front bracket slots as shown.

3.) Lower the back of the divider so that it rests on the back on the rollergrill. IMPORTANT: Be sure that the divider is not resting on the drip pan.

Industrial machinery with a red diagonal line overlay, showing layered metal components (no text or symbols visible)

INCORRECT!

4.) Repeat steps 2 & 3 until all the dividers are installed.

Table of contents Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Nemco

Model : 80435-36-SLT

Category : Hot Dog Maker