EPS-25-15 - Computer Adapter Mean Well - Free user manual and instructions

Category	Computer Adapter
Brand	Mean Well
Model	EPS-25-15
AC Input Voltage	100-240 VAC (universal)
DC Output Voltage	15 V
Output Current	1.67 A
Output Power	25 W
Efficiency	Level VI
Protections	Overcurrent, Short Circuit
Operating Temperature	-30°C to +70°C
Dimensions (L x W x H)	78 x 51 x 28 mm
Weight	100 g
Connector Type	2.1 x 5.5 mm barrel jack (center positive)
Ripple & Noise	< 80 mVp-p
Input Frequency	47-63 Hz
Safety Standards	UL, CE, FCC
Mounting Style	Desktop (external)
Maintenance	Wipe with a dry cloth; do not use liquids
Safety Precautions	Avoid moisture and direct sunlight; unplug when not in use
Spare Parts Availability	Not available; unit is not user-serviceable
Regulatory Compliance	RoHS, REACH

Frequently Asked Questions - EPS-25-15 Mean Well

What is the output voltage and current of the Mean Well EPS-25-15?

The EPS-25-15 provides a 15V DC output with a maximum current of 1.67A.

Can this adapter be used with 110V or 220V outlets?

Yes, it has a universal AC input ranging from 100-240V AC, making it compatible worldwide.

What type of DC connector does the EPS-25-15 use?

It typically uses a 2.1 x 5.5 mm barrel jack with center positive polarity.

Is the EPS-25-15 regulated?

Yes, it is a regulated switching power supply with tight voltage regulation and low ripple.

Does it have protection features?

Yes, it includes overcurrent protection and short circuit protection for safe operation.

What is the operating temperature range?

The adapter operates from -30°C to +70°C, suitable for various environments.

How do I clean the power adapter?

Unplug the adapter and wipe it with a dry, soft cloth. Do not use water or cleaning agents.

Can I repair the adapter if it fails?

No, the EPS-25-15 is not user-serviceable. Contact Mean Well or a qualified technician for replacement.

What certifications does this adapter have?

It meets UL, CE, FCC standards and is RoHS compliant.

What are the dimensions and weight?

Approximately 78 x 51 x 28 mm and 100 g.

USER MANUAL EPS-25-15 Mean Well

● Type : Open Frame (PCB) Type Switching Power Supply

(Families: PM, NFM, IRM, MPS, MPD, MPT, MPQ, RPS, RPD, RPT, PS, PD, PT, PQ, PPS, PPT, PPQ, ASP, PID, LPS, LPP, EPS, ELP, EPP)

- Introduction

An open frame (PCB) type switching power supply is a power supply designed to be integrated or installed into a system enclosure. Mean Well's open frame (PCB) type power supplies include on board, general PCB, green PCB, and medical PCB types.

- Installation

(1) Before commencing any installation or maintenance work, please disconnect your system from the utility. Ensure that it cannot be re-connected inadvertently!
(2) At least 5mm insulation distance on the bottom of the unit should be kept and a Mylar film should be added between the unit and the system. In addition, keep enough insulation distance, 10mm for general type/15mm for medical type, around the unit.
(3) Power supplies greater than 120W may require a forced air/fan for cooling. Please refer to specifications to receive a minimum air intensity and air-flow direction.
(4) Allow good ventilation for the unit in use to prevent it from overheating. Also, a 10-15 cm clearance must be kept when the adjacent device is a heat source.
(5) Mounting orientations other than standard orientation or operate under high ambient temperature may increase the internal component temperature and will require a de-rating in output current. Please refer to the specification sheets to receive the optimum mounting position and information about the de-rating curve.
(6) Recommended wires are shown as below.

AWG	18	16	14	12	10	8
Rated Current of Equipment (Amp)	6A	6-10A	10-16A	16-25A	25-32A	32-40A
Cross-section of Lead( mm2 )	0.75	1.00	1.5	2.5	4	6
Note:Current each wire carries should be de-rated to 80% of the current suggested above when using 5 or more wires connected to the unit.

(7) For other information about the products, please refer to www.meanwell.com for details.

● Warning / Caution !!

(1) Risk of electrical shock and energy hazard. All failure should be examined by a qualified technician. Please do not try to fix the power supply by yourself!
(2) Please do not install power supplies in places with high moisture or near the water.
(3) Please do not install power supplies in places with high ambient temperature or near fire source. Please refer to the specifications about the maximum ambient temperature limitations.
(4) Output current and output wattage must not exceed the rated values on specifications.
(5) The ground (FG) must be connected to earth ground.
(6) All MW's PSUs are designed in accordance with EMC regulations and the related test reports are available by request. Since they are belong to component power supplies and will be installed inside system enclosure, when they are integrated into a system, the EMC characteristics of the end system must be re-verified again.

Manufacturer :

MEAN WELL ENTERPRISES Co., LTD.

No.28, Wuquan 3rd Rd., Wugu Dist.,

New Taipei City 24891, Taiwan

Tel: [phone]

Web: www.meanwell.com

Branch Office :

China

MEAN WELL (GUANGZHOU)

ENTERPRISES Co., LTD.

2F, A Building, Yuean Industry Park,

Huangcun, Dongpu Yown, Tianhe

District, Gungzhou, China

Post Code:510660

Tel: [phone]

Web: www.meanwell.com.cn

U.S.A.

MEAN WELL USA, INC.

44030 Fremont Blvd., Fremont,

CA 94538, U.S.A.

Tel: [phone]

Web: www.meanwellusa.com

Europe

MEAN WELL EUROPE B.V.

Langs de Werf 8, 1185XT

Amstelveen, The Netherlands

Tel: [phone]

Web: www.meanwell.eu