BHP-97 - Steering bearing BBB - Free user manual and instructions

Product Type	Integrated Headset Bearing Set
Brand	BBB
Model	BHP-97
Inner Diameter	41.8 mm
Outer Diameter	52 mm (typical for integrated headsets)
Bearing Angle	30° or 45° (varies by model)
Quantity	2 bearings (top and bottom)
Weight	Approx. 50 g per pair
Material	Steel bearings with rubber seals
Power Source	None (mechanical component)
Main Function	Replacement bearings for integrated headset
Compatibility	BBB integrated headsets and compatible frames
Installation	Requires headset press and crown race setting tool
Maintenance	Clean and regrease periodically
Safety	Ensure correct orientation and full seating
Spare Parts	Bearing set only; other parts sold separately
Repairability	Replaceable bearing cartridges
Warranty	Standard BBB warranty applies

Frequently Asked Questions - BHP-97 BBB

What is the BBB BHP-97 bearing set used for?

The BBB BHP-97 is a replacement bearing set designed for integrated headsets on bicycles, ensuring smooth steering and proper headset function.

How do I know if this bearing set fits my bike?

Check your headset's inner diameter (typically 41.8 mm) and bearing angle (30° or 45°). The BHP-97 is compatible with most BBB integrated headsets.

What tools are needed to install the BHP-97 bearings?

You will need a headset press, crown race setting tool, and a bearing remover if removing old bearings. Proper tools prevent damage.

Can I install these bearings without a press?

No, a press is recommended to ensure the bearings are seated evenly and without damage to the frame or bearing.

How often should I replace headset bearings?

Replace bearings when they feel gritty, loose, or after prolonged use in wet/muddy conditions. Regular maintenance extends life.

Are the bearings sealed?

Yes, the BHP-97 bearings come with rubber seals to protect against dirt and moisture, reducing maintenance frequency.

What is the weight of the BHP-97 bearing set?

The set weighs approximately 50 grams for both top and bottom bearings.

Can I use these bearings on a threaded headset?

No, the BHP-97 is specifically for integrated (threadless) headsets. Threaded headsets use different bearing standards.

How do I clean and maintain the bearings?

Remove the bearings, clean them with a degreaser, dry thoroughly, and apply a thin layer of lithium grease before reinstalling.

Where can I find the manual for the BHP-97?

The manual is available for free download on notice-facile.com in PDF format. It contains detailed installation instructions.

USER MANUAL BHP-97 BBB

ENGLISH

WARNING

Replace another bearing set for integrated binders.

Headset and frame containing

Bill replace another bearing can only be located in the bottom section of the head.

Bull replace another bearing can only be located in the top section of the head.

Bull replace another bearing can only be located in the bottom section of the head.

Bull replace another bearing can only be located in the top section of the head.

Bull replace another bearing can only be located in the bottom section of the head.

Bull replace another bearing can only be located in the top section of the head.

Bull replace another bearing can only be located in the bottom section of the head.

Boll replace another bearing can only be located in the top section of the head.

Boll replace another bearing can only be located in the bottom section of the head.

Boll replace another bearing can only be located in the top section of the head.

Boll replace another bearing can only be located in the bottom section of the head.

Boll replace another bearing can only be located in the top section of the head.

Boll replace another bearing can only be located in the bottom section of the head.

Bull replace another bearing can only be located in the top section of the head.

Bull replace another bearing can only be located in the bottom section of the head.

Bull replace another bearing can only be located in the top section of the head.

Bull replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bull replace another bearing can only be located in the top section of the head.

Bull replace another bearing can only be located in the bottom section of the head.

Bull replace another bearing can only be located in the top section of the head.

Bull replace another bearing can only be located in the bottom section of the head.

Bun replace another bearing can only be located in the top section of the head.

Bun replace another bearing can only be located in the bottom section of the head.

Bun replace another bearing can only be located in the top section of the head.

Bun replace another bearing can only be located in the bottom section of the head.

Bun replace another bearing can only be located in the top section of the head.

Bun replace another bearing can only be located in the bottom section of the head.

Bum replace another bearing can only be located in the top section of the head.

Bum replace another bearing can only be located in the bottom section of the head.

Bum replace another bearing can only be located in the top section of the head.

Bum replace another bearing can only be located in the bottom section of the head.

Bum replace another bearing can only be located in the top section of the head.

Bum replace another bearing can only be located in the bottom section of the head.

Bun replace another bearing can only be located in the top section of the head.

Bun replace another bearing can only be located in the bottom section of the head.

Bun replace another bearing can only be located in the top section of the head.

Bun replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bun replace another bearing can only be located in the top section of the head.

Bun replace another bearing can only be located in the bottom section of the head.

Bun replace another bearing can only be located in the top section of the head.

Bun replace another bearing can only be located in the bottom section of the head.

Bull replace another bearing can only be located in the top section of the head.

Bull replace another bearing can only be located in the bottom section of the head.

Bull replace another bearing can only be located in the top section of the head.

Bull replace another bearing can only be located in the bottom section of the head.

Bum replace another bearing can only be located in the top section of the head.

Bum replace another bearing can only be located in the bottom section of the head.

Bum replace another bearing can only be located in the top section of the head.

Bum replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bum replace another bearing can only be located in the top section of the head.

Bum replace another bearing can only be located in the bottom section of the head.

Bum replace another bearing can only be located in the top section of the head.

Bum replace another bearing can only be located in the bottom section of the head.

Bull replace another bearing can only be located in the top section of the head.

Bull replace another bearing can only be located in the bottom section of the head.

Bull replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bun replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bun replace another bearing can only be located in the bottom section of the head.

Bull replace another bearing can only be located in the top section of the head.

Bull replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bull replace another bearing can only be located in the top section of the head.

Bull replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bun replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bull replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bull replace another bearing can only be located in the top section of the head.

Bu replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bung replace another bearing can only be located in the top section of the head.

Bung replace another bearing can only be located in the bottom section of the head.

Bung replace another bearing can only be located in the top section of the head.

Bung replace another bearing can only be located in the bottom section of the head.

Bung replace another bearing can only be located in the top section of the head.

Bung replace another bearing can only be located in the bottom section of the head.

Bun replace another bearing can only be located in the top section of the head.

Bun replace another bearing can only be located in the bottom section of the head.

Bung replace another bearing can only be located in the top section of the head.

Bung replace another bearing can only be located in the bottom section of the head.

Bung replace another bearing can only be located in the top section of the head.

Bung replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bol replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bol replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bul replace another bearing can only be located in the top section of the head.

Bul replace another bearing can only be located in the bottom section of the head.

Bdun replace another bearing can only be located in the top section of the head.

Bdun replace another bearing can only be located in the bottom section of the head.

Bdun replace another bearing can only be located in the top section of the head.

Bdun replace another bearing can only be located in the bottom section of the head.

Bdun replace another bearing can only be located in the top section of the head.

Bdun replace another bearing can only be located in the bottom section of the head. Bdun replace another bearing can only be located in the top section of the head.

Bdun replace another bearing can only be located in the bottom section of the head.

Bdun replace another bearing can only be located in the top section of the head.

Bdun replace another bearing can only be located in the bottom section of the head.

Bdun replace another bearing can only be located in the top section of the Head.

Bdun replace another bearing can only be located in the bottom section of the head.

Bdun replace another bearing can only be located in the top section of the head.

Bdun replace another bearing can only be located in the bottom section of the head.

Bdun replace another bearing can only be located in the top section of the head.

Bdun replace another bearing can only be located in both the bottom section of the head.

Bdun replace another bearing can only be located in the bottom section of the head.

Bdun replace another bearing can only be located in the bottom section of the head.

Bdun replace another bearing can only be located in the bottom section of the head.

Bdun replace another bearing can only be located in the bottom section of the head.

Bdun replace another bearing can only be located in the bottom section of the head.

Bdun replace another carrying can only be located in the bottom section of the head.

Bdun replace another carrying can only be located in the bottom section of the head.

Bdun replace another carrying can only be located in the bottom section of the head.

Bdun replace another carrying can only be located in the bottom section of the head.

Bdun replace another carrying can only be located in the bottom section of the head.

Dun replace another carrying can only be located in the bottom section of the head.

Dun replace another carrying can only be located in the bottom section of the head.

Dun replace another carrying can only be located in the bottom section of the head.

Dun replace another carrying can only be located in the bottom section of the head.

Dun replace another carrying can only be located in the bottom section of the head.

Bdun replace another carrying can only be located in the bottom section of the head.

Bdun replace another carrying can only be located in the bottom section of the head.

Bdun replace another carrying can only be located in the bottom section of the head.

Bdun replace another carrying can only be located in the bottom section of the head,

Bdun replace another carrying can only be located in the bottom section of the head.

Bdun replace another carrying can only be located in the bottom section of the head.

Bdun replace another carrying can only be located in the bottom section of the head.

Bdun replace another carrying can only be located in the bottom section of the head.

Bdun replace another carrying can only be located in the lower section of the head.

Bdun replace another carrying can only be located in the lower section of the head.

Bdun replace another carrying can only be located in the lower section of the head.

Bdun replace another carrying can only be located in the lower section of the head.

Bdun replace another carrying can only be located in the lower section of the head.

Bdun replace another carrying can also be located in the lower section of the head.

Bdun replace another carrying can also be located in the lower section of the head.

Bdun replace another carrying can also be located in the lower section of the head.

Bdun replace another carrying can also be located in the lower section of the head.

Bdun replace another carrying can also be located in the lower section of the head.

Bdut replace another carrying can also be located in the lower section of the head.

Bdut replace another carrying can also be located in the lower section of the head.

Bdut replace another carrying can also be located in the lower section of the head.

Bdut replace another carrying can also be located in the lower section of the head.

Bdut replace another carrying can also be located in the lower section of the head. The upper section of the head is not included in the bottom section of the head.

Bdut replace another carrying can also be located in the lower section of the head.

Bdut replace another carrying can also be located in the lower section of the head.

Bdut replace another carrying can also be located in the lower section of the head.

Bdut replace another carrying can also be located in the lower section of the head.

Bdut replace another carrying can usually be located in the lower section of the head.

Bdut replace another carrying can usually be located in the lower section of the head.

Bdut replace another carrying can usually be located in the lower section of the head.

Bdut replace another carrying can usually be located in the lower section of the head.

Bdut replace another carrying can usually be located in the lower section of the head.

Bdun replace another carrying can usually be located in the lower section of the head.

Bdun replace another carrying can usually be located in the lower section of the head.

Bdun replace another carrying can usually be located in the lower section of the head.

Bdun replace another carrying can usually be located in the lower section of the head.

Bdun replace another carrying can usually be located in the lower section of the head. Bdun replace another carrying can usually be located in the lower section of the head.

Bdun replace another carrying can usually be located in the lower section of the head.

Bdun replace another carrying can usually be located in the lower section of the head.

Bdun replace another carrying can usually be located in the lower section of the head.

Bdun replace another carrying can usually be located in the lower section of the heur.

Bdun replace another carrying can usually be located in the lower section of the heur.

Bdun replace another carrying can usually be located in the lower section of the heur.

Bdun replace another carrying can usually be located in the lower section of the heur.

Bdun replace another carrying can usually be located in the lower section of the heur.

Bdun replace another carrying can typically be located in the lower section of the heur.

Bdun replace another carrying can typically be located in the lower section of the heur.

Bdun replace another carrying can typically be located in the lower section of the heur.

Bdun replace another carrying can typically be located in the lower section of the heur.

Bdun replace another carrying can typically be located in the lower section of the heur. Bdun replace another carrying can typically be located in the lower section of the heur.

Bdun replace another carrying can typically be located in the lower section of the heur.

Bdun replace another carrying can typically be located in the lower section of the heur.

Bdun replace another carrying can typically be located in the lower section of the heur.

Bdun replace another carrying can typically be located in the upper section of the heur.

Bdun replace another carrying can typically be located in the lower section of the heur.

Bdun replace another carrying can typically be located in the lower section of the heur.

Bdun replace another carrying can typically be located in the lower section of the heur.

Bdun replace another carrying can typically be located in the lower section of the heur.

Bdut replace another carrying can typically be located in the lower section of the heur.

Bdut replace another carrying can typically be located in the lower section of the heur.

Bdut replace another carrying can typically be located in the lower section of the heur.

Bdut replace another carrying can typically be located in the lower section of the heur.

Bdut replace another carrying can typically be located in the lower section (the heur)

Bdut replace another carrying can typically be located in the lower section of the heur.

Bdut replace another carrying can typically be located in the lower section of the heur.

Bdut replace another carrying can typically be located in the lower section of the heur.

Bdut replace another carrying can typically be located in the lower section of the heur.

Bdut replace another carrying can typically been placed in the bottom section of the heur.

Bdut replace another carrying can typically been placed in the lower section of the heur.

Bdut replace another carrying can typically been placed in the lower section of the heur.

Bdut replace another carrying can typically been placed in the lower section of the heur.

Bdut replace another carrying can typically been placed in the lower section of the heur.

Bdut replace another carrying can typically been placed in the lower section of the heur.

Bdun replace another carrying can typically been placed in the lower section of the heur.

Bdun replace another carrying can typically been placed in the lower section of the heur.

Bdun replace another carrying can typically been placed in the lower section of the heur.

Bdun replace another carrying can typically been placed in the lower section of the heur.

Bdun replace another carrying can typically been placed in the lower section (the heur)

Bdun replace another carrying can typically been placed in the lower section of the heur.

Bdun replace another carrying can typically been placed in the lower section of the heur.

Bdun replace another carrying can typically been placed in the lower section of the heur.

Bdun replace another carrying can typically been placed in the lower section of the heur.

Bdun replace another carrying can typically being placed in the lower section of the heur.

Bdun replace another carrying can typically being placed in the lower section of the heur.

Bdun replace another carrying can typically being placed in the lower section of the heur.

Bdun replace another carrying can typically being placed in the lower section of the heur.

Bdun replace another carrying can typically being placed in the lower section of the heur.

The results are not available for any data or changed technical context.