ORI-025 - Griddle ORION - Free user manual and instructions

Product Type	Steam Iron
Brand	ORION
Model	ORI-025
Voltage	220-240 V (check type plate)
Power Consumption	Approximately 2000 W
Soleplate Material	Stainless Steel (typical)
Water Tank Capacity	300 mL (typical)
Cord Length	2.5 m (typical)
Temperature Settings	Nylon/Acrylic/Acetate, Silk/Rayon/Polyester, Wool/Cotton, Linen (MAX)
Dry Ironing	Yes
Spray Function	Yes
Burst Steam	Yes (up to 3 times consecutively, 4 sec interval)
Vertical Steam	Yes
Anti-Calc System	Built-in anti-calc cartridge (non-replaceable)
Anti-Drip System	Automatic anti-drip function
Auto Shut-Off	Yes (when iron is left still)
Self-Clean Function	Yes (via self-clean button)
Indicator Light	Pilot light for temperature
Care Instructions	Clean with damp cloth; rinse water tank regularly; do not use abrasives
Safety Features	Auto shut-off, anti-drip, do not immerse in water
Accessories Included	Beaker for water filling

Frequently Asked Questions - ORI-025 ORION

How do I use the spray function?

Ensure there is enough water in the water tank. Press the spray button to produce a fine spray from the nozzle. Do not spray silk fabrics.

How do I use the burst steam feature?

Set the temperature control to a steam setting (between '●●' and 'MAX'). Do not press the burst steam button more than 3 times consecutively; leave at least 4 seconds between presses. Never direct steam towards people or animals.

How do I use vertical steam?

Hang the garment on a hanger. Set the temperature to a steam setting, hold the iron vertically at a slight distance from the fabric, and press the burst steam button. Never direct steam towards people or animals.

What temperature should I use for different fabrics?

Refer to the temperature control table: Nylon/Acrylic/Acetate (●), Silk/Rayon/Polyester (●●), Wool/Cotton (●●●), Linen (MAX). Start with lower temperatures for delicate fabrics.

How do I clean the iron?

Unplug the iron and let it cool completely. Set steam control to '0' or '✗'. Clean the exterior with a damp cloth, then dry. Rinse the water tank regularly with water and empty after cleaning. Do not use scouring pads or abrasive cleaners.

What does the anti-drip function do?

The anti-drip function automatically stops steam generation when the temperature is too low to prevent water from dripping onto the soleplate. If the temperature drops, move the iron slightly and wait for the pilot light to go off before ironing.

What is the anti-calc system?

The iron has a built-in anti-calc cartridge within the water tank that reduces scale deposits, prolonging the iron's life. It is an integral part and does not need to be replaced.

How does the auto shut-off work?

The auto shut-off function activates when the iron is left still for a certain period. The pilot light flashes or a buzzer sounds. Simply pick up or move the iron to reactivate it; once the temperature stabilizes, the pilot light goes out and you can continue ironing.

Can I use tap water in the iron?

Yes, tap water is generally acceptable. However, to minimize scale buildup, you may use a mixture of tap and distilled water. Always empty the water tank after use.

How should I store the iron after use?

After use, set the steam control to '0' or '✗', unplug the iron, and allow it to cool completely. Empty any remaining water from the water tank. Store the iron upright on its heel on a stable surface.

USER MANUAL ORI-025 ORION

White and maroon iron iron with a spool, showing internal components and branding (no readable text or symbols beyond branding)

Dear Customers, Thank you for buying ORION products!

Welcome to use!

Read the instructions for use carefully before using the appliance and save them for future reference.

IMPORTANT SAFEGUARDS

1. Before connecting the appliance check that the voltage indicated on the type plate corresponds to the mains voltage in your country.
2. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
3. Do not immerse the appliance in water and other liquids.
4. Do not reach for an appliance that has fallen into water. Unplug it from the wall socket.
5. Do not leave the appliance unattended when it is switched on.
6. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water.
7. To avoid a circuit overload, do not operate another high-wattage appliance on the same circuit.
8. Do not pull the cord to move the appliance. Do not bend or wrap cord around the appliance.
9. Do not use it with wet hands.
10. Switch the appliance off holding plug not cord.
11. Keep the cord away from the hot soleplate.
12. Do not allow children to play with the appliance.
13. The appliance is not intended for commercial use.
14. This appliance should only be used according to its approved purpose. Any other use of it is wrong and therefore dangerous. The manufacturer is not responsible for damages resulting from improper or incorrect use of the appliance. Under these conditions, the guarantee will be cancelled.
15. Regular cleaning and proper maintenance ensure optimal results and a long life for your appliance.
16. The plug must be removed from the socket-outlet before the water reservoir is filled with water.
17. The filling aperture must not be opened during use.
18. When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
19. To prevent the risk of electric shock, do not disassemble or repair the iron.
20. After using, turn the temperature control knob off or to "MIN".
21. Let iron cool completely before cleaning or putting away.
22. Save this instruction manual for future reference.

DETAILS

1. Spray nozzle
2. Water inlet cover
3. Steam control knob
4. Spray button
5. Burst steam button

6. Pilot light cover

7. Cord sleeve

8. Beaker
9. Temperature control knob
10. Self clean button
11. Water tank
12. Soleplate

HOW TO USE

Note:

Remove any labels, stickers or protective foil that may be attached to the body or

Setting the temperature

Fabric	Temperature control
NYLON/ACRYLIC/ACETATE	●
SILK/RAYON/POLYESTER	●●
WOOL/COTTON	●●●
LINEN	MAX

1. Stand the iron on its heel and plug the power cord into wall socket.
2. Turn the iron temperature control knob until you get the desired fabric/temperature setting. We recommend using the above table as a guide.
3. The temperature pilot light will light, indicating that the soleplate is heating up.
4. When the pilot light goes out, the required temperature has been reached. The temperature pilot light will go on from time to time during ironing.

Dry ironing

1. Set the steam button to position «0» or «✗».
2. Turn the temperature control knob to select the desired fabric/temperature setting. The indicator pilot light will light, put the iron on the smooth and stable place vertically.
3. When the indicator pilot light goes out, the required temperature has been reached.
4. You can begin to iron.

Spraying

1. Ensure there is enough water in the water tank.
2. Press the spray button to produce a fine spray of spray nozzle and continue ironing

Note: Do not spray silk.

Note:

Only use the steam push button when the steam iron has reached the steam or maximum temperature.
Do not press this burst steam button more than 3 times at once. For optimal steam output, leave an interval of at least four seconds between pressing the burst steam button.
The burst steam feature can be used with Dry or Steam ironing as desired.
➢ Never direct the steam towards people and animals. Burns or serious injury may occur.

Vertical shot of steam

1. Hang your clothes on a hanger
2. When the temperature control knob is set to a steam setting (between "●●" to "MAX") vertical steam can be used.
3. Ensure that there is enough water in the water tank.
4. Simply hold the iron vertically, positioned in front with a slight distance from the item to be steamed, and press the burst steam button.

Note:

➢ Never direct the steam towards people and animals. Burns or serious injury may occur.

AUTOMATIC ANTI-CALC FUNCTION

Your iron contains an anti-calc cartridge to reduce scale deposits. This considerably prolongs the operational life of your iron. The anti-calc cartridge is an integral part of the water tank and dose not needs to be replaced.

AUTOMATIC ANTI-DRIP FUNCTION

Your iron have anti-drip function. The iron automatically stops generating steam when the temperature is too low to prevent water form dripping out of the soleplate.

To let the iron heat up again:

1. Pick up the iron or move it slightly.
2. The auto-off pilot light stop flashing (or the buzzer will stop beeping). if the temperature of the soleplate has dropped below the set ironing temperature, the temperature pilot light will turn on.
3. If the temperature pilot light truns on after you have moved the iron, waiting until it goes out before you start ironing.

Note:

If the temperature pilot light does not go on after you move the iron, the soleplate still has the right temperature and the iron is ready for use. When Auto-shut-off function happens you may hear a sound.

CARE AND CLEAN

1. Before cleaning, set the steam control knob to position «0» or «###».
2. Unplug the iron from wall socket, and allow the appliance completely cool down.
3. Clean it with a damp cloth and then with dry cloth.
4. Do not immerse the unit into water or other liquids.
5. Regularly rinse the water tank with water, empty the water tank after clean.
6. Never use scouring pads, abrasive or chemical cleaners, or solvents to clean the exterior or soleplate of your iron.
7. After use, set the steam control knob to the «0» or «###», disconnect the unit from main socket, empty remaining water from water tank and then store the iron after it has been completely cooled down.

Note:

➢ Steam and boiling water will come out of the soleplate, impurities and flakes (if have) will be flushed out.
Do not push and hold the self clean button while ironing.

CHARACTERISTICS

• Iron
  • Adjustable temperature for different fabrics