HUSCR-NFC - Unknown Hamlet - Free user manual and instructions

Product Type	NFC Card Reader
Brand	Hamlet
Model	HUSCR-NFC
Dimensions (approx)	10 cm x 6 cm x 2 cm
Weight (approx)	50 g
Power Supply	USB (5V, 500mA)
Interface	USB 2.0
Operating Frequency	13.56 MHz
Supported Cards	MIFARE, ISO 14443 A/B, FeliCa
Read Range	Up to 5 cm
Operating Temperature	0°C to 50°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% non-condensing
Main Functions	Contactless reading and writing of NFC tags and smart cards
Compatibility	Windows, macOS, Linux
Cleaning	Wipe with dry cloth; avoid liquids
Safety	CE, FCC certified; low power consumption
Spare Parts	No user-serviceable parts; replace unit
Repairability	Not repairable by user; contact support
General Information	Plug & play; no driver required for most OS

Frequently Asked Questions - HUSCR-NFC Hamlet

How do I install the Hamlet HUSCR-NFC on my computer?

Simply plug the HUSCR-NFC into a USB port. It is plug-and-play and should be recognized automatically. No additional drivers are needed for Windows, macOS, or Linux.

Which NFC cards are supported?

The reader supports MIFARE, ISO 14443 A/B, and FeliCa cards. It reads and writes at 13.56 MHz.

What is the maximum read range?

The typical read range is up to 5 cm. For best performance, place the card close to the reader.

Can I use it with my smartphone?

The HUSCR-NFC is designed for computers via USB. It does not connect directly to smartphones unless via OTG adapter and compatible software.

Does it work with Mac?

Yes, it is compatible with macOS. Simply plug it in and it will be recognized as a standard HID device.

How do I clean the reader?

Use a dry, soft cloth to wipe the surface. Do not use liquids or abrasive cleaners.

What should I do if the reader is not detected?

Try a different USB port or cable. Restart your computer. If still not detected, check Device Manager for unrecognized devices.

Is the reader secure?

The reader uses standard NFC communication and is CE and FCC certified. It has no built-in encryption, relying on the security of the card/chip itself.

Can I read my passport?

Yes, if your passport has an NFC chip (ePassport). You will need software that can read the specific format.

What is the warranty period?

The HUSCR-NFC comes with a limited warranty of 1 year from date of purchase. Please check the included documentation for details.

USER MANUAL HUSCR-NFC Hamlet

Contactless NFC Smart Card Reader 100% Compatible with Italian CIE 3.0

User Manual HUSCR-NFC

www.hamletcom.com

Dear Customer.

thanks for choosing an Hamlet product. Please carefully follow the instructions for its use and maintenance and, once this item has run its life span, we kindly ask You to dispose of it in an environmentally friendly way, by putting it in the separate bins for electrical/electronic waste, or to bring it back to your retailer who will collect it for free.

We inform You this product is manufactured with materials and components in compliance with RoHS Directives 2011/65/EU & 2015/863/EU. WEEE Directive 2002/96/CE, 2003/108/CE Italian Legislative Decree 2005/151 and RED Directive 2014/53/EU for the following standards:

EN 50364: 2018

EN 62368-1: 2014 + A11: 2017 ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-3 V2.1.1 (2019-03) ETSI EN 300 330 V2.1.1 (2017-02)

CE Mark Warning

This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.

The complete CE declaration of conformity of the product can be obtained by contacting Hamlet at [e-mail]. Visit www.hamletcom.com for complete information on all Hamlet products and to access downloads and technical support. Imported by: CARECA ITALIA SPA - Scandiano (RE) . Italy.

All trademarks and company names mentioned in this manual are used for description purpose only and remain property of their respective owners. The material in this document is for information only. Contents, specifications and appearance of the product are indicative and may change without notice.

DESCRIPTION

Hamlet HUSCR-NFC is a Smart Card reader with contact and contactless NFC technology that connects to your computer and allows you to use the Italian Electronic Identity Card (CIE). Regional Services Card (CRS) and the National Services Card (CNS) to access online services of public administration, sign digital documents and securely access to websites for Home Banking, e-commerce and other applications that require secure data. This Smart Card Reader is also compatible with the electronic signature software of Italian Chambers of Commerce.

Package contents

- NFC Smart Card Reader - User manual

INSTALLATION

Windows Installation

The Smart Card Reader is automatically detected and installed on Windows operating systems. Just plug the cable into a USB port of your computer.

EXAMPLES OF USE OF THE DEVICE

Installation of additional software for Smart Card reading and online services

In order to read or access the services provided through Smart Cards or online portals, it is necessary to install software provided by the organization providing the service.

Italian Electronic Identity Card

The new Electronic Identity Card (CIE) can be requested from your Municipality of residence. Together with the CIE a PIN code is also provided which is necessary for its use.

To use the Electronic Identity Card with the HUSCR-NFC reader, it is necessary to install the CIE Software which can be downloaded for free from the CIE Portal at www.cartaidentita.interno.gov.it. The CIE Software (also called "middleware") is the software required to use the Electronic Identity Card for online access to the services provided by the Public Administration. To pair your CIE with the CIE Software, proceed as follows:

1. Double click on the "CIE-Middleware.exe" file to install the downloaded software. If Microsoft's User Account Control (UAC) screen appears, click "YES" to continue.

2. Follow the on-screen instructions to complete the installation.

3. Start the CIE Middleware software and follow the instructions to verify and pair your CIE.

4. During the procedure you will be asked to place the CIE on the reader and to enter the PIN code (8 digits).

5. At the end of the procedure, the CIE will be enabled for use. Click OK to finish.

Digital Signature

An example of software used for digital signature is the DIKE software. This software is available for free download on InfoCert website (www.firma.infocert.it/prodotti/dikegosign.php). This software will allow you to sign your documents by reading the smart card. We recommend to contact the customer service of your smart card provider to find out the correct software to use.

National Service Card and Online Portal - Lombardy Region

To learn how to use the Regional Service Card (CRS) and the National Service Card (TS-CNS) of the Lombardy Region, visit the website www.regione.lombardia.it

For information on electronic health records, digital welfare services and healthcare appointments, follow the path from the menu Servizi e informazioni > Servizi online > Salute e prevenzione > Carta Regionale dei Servizi (CRS) / Tessera Sanitaria Nazionale (TS-CNS).

Read info and download the Software for CRS/CNS on the following page of Lombardia Informatica website:

www.lispa.it/wps/portal/LISPA/Home/Servizi-di-Certificazione-Dicitale/Software-for-CRS-CNS

Before using the service, we recommend to check that your card is activated and to have the PIN and PUK code. For more information, the toll-free number 800.030.606 is available (active from Monday to Saturday, from 8.00 to 20.00).

SPID Authentication

SPID, the Public Digital Identity System, is the solution that allows access to all online services of the Public Administration with a single Digital Identity (username and password) from computers, tablets and smartphones. Access via Smart Card is required, for example, for services that require SPID authentication of level 3. For more information, visit www.spid.gov.it

FAQ - FREQUENTLY ASKED QUESTIONS

WINDOWS - How to use the reader after installation

In order to correctly use the reader after installation, the user must install the additional software of the organization/service providing the Smart Card as described in the "Examples of use of the device" section of this manual.

WINDOWS – Card reading impossible

Check that you have installed the latest software from the organization that provides the service accessible via your Smart Card. For more information, please contact our customer service via e-mail at [e-mail].

WINDOWS - The reader turns off after a few minutes of inactivity

With some Operating Systems the reader may turn off due to the energy saving settings active on your computer. To disable this setting, check that in the device properties under the energy saving item, in the Device management menu, the "Allow computer to turn off the device to save energy" item is disabled.

SPECIFICATIONS

• USB Reader for Contact and Contactless NFC Smart Cards
• Supported contactless Smart Cards:
• MIFARE classic 1KB / 4KB. Ultralight and DESFire
• ISO 14443 type A, type B
• ISO 15693
• NFC tag type 1, 2, 3, 4A, 4B, 18000-3 mode 3, FeliCa
• Operating frequency: 13.56 MHz
• Operating distance: 40 mm
  • Supported Contact Smart Cards
• ISO 7816-3 (protocol T = 0 and T = 1)
  • Supports Smart Cards operating at 1.8V, 3V and 5V
  • Compatible with IC/Smart Card EMV, JICSAP, I2C
  • USB 2.0 Full Speed (12 Mbps) connection
  • LED indicators for power and activity
  • OS Support: Windows 8 and 10
• Size (without cable): 63 x 100 x 15 mm
  • Cable length: 120 cm