Wood - Musical instrument Hotone - Free user manual and instructions

Product Type	Guitar Effects Pedal
Brand	Hotone
Model	Wood
Category	Musical Instrument
Dimensions (approx.)	7.4 x 12.2 x 5.0 cm (2.9 x 4.8 x 2.0 in)
Weight (approx.)	200 g (7.1 oz)
Power Supply	9V DC (center negative) or 9V battery (optional)
Current Consumption	Approx. 20 mA
Input Connector	1/4" mono jack (instrument input)
Output Connector	1/4" mono jack (amplifier output)
Controls	Volume, Tone, Gain (or Drive), Level
Indicator	LED power/effect status
Enclosure Material	Die-cast aluminum (chassis), steel (base)
Effect Type	Overdrive / Distortion (Wood-like tone)
Bypass	True bypass via footswitch
Accessories Included	User manual, adhesive pad, (battery not included)
Operating Temperature	0°C to 40°C (32°F to 104°F)
Warranty	1 year limited warranty

Frequently Asked Questions - Wood Hotone

What power supply does the Hotone Wood pedal require?

The pedal accepts a standard 9V DC power supply with center negative polarity, or can be powered by a 9V battery (not included). Current draw is approximately 20 mA.

How do I connect the Hotone Wood pedal?

Connect your guitar to the input jack and the output to your amplifier's input. Use a standard 1/4' mono instrument cable. Ensure the power supply is connected before use.

What type of effect is the Wood pedal?

The Hotone Wood is designed to produce overdrive and distortion tones reminiscent of vintage wood-rich electric guitar sounds. It offers controls for Volume, Tone, and Gain.

Does the pedal have true bypass?

Yes, the Hotone Wood features true bypass via the footswitch. When the effect is off, your guitar signal goes directly to the output without tonal coloration.

What type of battery does the Wood pedal use and how long does it last?

It uses a standard 9V alkaline battery (6LR61). Battery life depends on usage but typically lasts around 20 hours due to low current consumption.

Can I use the Wood pedal with a pedalboard power supply?

Yes, as long as the power supply provides 9V DC with at least 20 mA per output. Use a standard 2.1mm barrel connector with center negative polarity.

What are the dimensions and weight of the pedal?

The pedal measures approximately 7.4 x 12.2 x 5.0 cm (2.9 x 4.8 x 2.0 in) and weighs about 200 g (7.1 oz). It is compact and pedalboard-friendly.

Is the Hotone Wood pedal suitable for bass guitar?

While designed for electric guitar, it can be used with bass due to its wide frequency range. However, low-end response may be reduced. Try setting the Tone control to maintain clarity.

How do I clean and maintain the pedal?

Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface. Avoid solvents or abrasive cleaners. Keep jacks and power connector free of dust. Store in a dry place.

What is covered under the warranty?

The 1-year limited warranty covers defects in materials and workmanship under normal use. It does not cover damage from misuse, modifications, or unauthorized repairs. Retain your purchase receipt.

USER MANUAL Wood Hotone

Acoustic Guitar Simulator

Owner's Manual

THANK YOU FOR PURCHASING A HOTONE PRODUCT!

WOOD is an acoustic guitar simulator stompbox designed for guitarists. It provides a large adjustable range which is enough to turn an ordinary electric guitar tone into a variety of natural, realistic acoustic tones.

Use the 3-way toggle switch to choose from 3 different simulation modes; the BODY knob and the TOP knob can further shape your tone.