REX DSF-132 - Tripod Magnus - Free user manual and instructions

Product Type	Tripod
Brand	Magnus
Model	REX DSF-132
Maximum Load Capacity	8 kg
Number of Leg Sections	3
Leg Material	Aluminum
Head Type	Fluid head with adjustable friction
Quick Release Plate	Yes, standard 2-way
Bubble Level	Yes, on head
Height Range	22.5 - 72.0 inches (57 - 183 cm)
Folded Length	26.5 inches (67 cm)
Weight	3.5 kg
Maximum Height with Column Extended	72.0 inches (183 cm)
Center Column	Rapid with reversible column
Leg Lock Type	Twist lock
Tilt Range	+90° / -70°
Pan Range	360°
Mount Type	1/4 inch and 3/8 inch screw
Color	Black
Warranty	1 year

Frequently Asked Questions - REX DSF-132 Magnus

How do I set up the Magnus REX DSF-132 tripod?

Extend the legs one section at a time, twisting the locks to secure. Extend the center column last for stability. Use the bubble level to ensure the tripod is horizontal.

What is the maximum weight the tripod can hold?

The Magnus REX DSF-132 supports up to 8 kg (17.6 lbs). Avoid exceeding this limit to prevent damage.

Can I use this tripod with a DSLR camera?

Yes, the tripod is compatible with most DSLR and mirrorless cameras. The head accepts standard 1/4 inch and 3/8 inch screws.

How do I attach the quick release plate?

Slide the plate into the head until it clicks. To release, press the red button or lever. Ensure the plate is tight on the camera.

How do I clean and maintain the tripod?

Wipe with a dry cloth after use. Avoid using solvents. Lubricate twist locks with silicone grease if they become stiff.

Is the Magnus REX DSF-132 suitable for video?

Yes, the fluid head provides smooth pan and tilt for video work. The friction adjustment helps control movement.

What is the folded length of the tripod?

When folded, the tripod measures approximately 26.5 inches (67 cm), making it relatively portable.

Can I replace parts if damaged?

Yes, many parts like legs, locks, and head are replaceable. Contact Magnus support for spare parts availability.

How do I prevent the tripod from slipping?

Ensure legs are firmly planted on stable ground. For added grip, extend the rubber feet or use spikes if available.

Does the tripod come with a carrying case?

The package typically includes a padded bag for storage and transport. Check your purchase for included accessories.

USER MANUAL REX DSF-132 Magnus

Dolly for Video Tripods with Dual-Angle Spiked Feet

Owner's

Manual

Using Your DSF-132 Dolly

Assembling the dolly:

Rotate the outside legs into position, and secure by tightening the locking knob ①. When collapsed, use the handle ⑤ for transport.

Locking the wheels:

Use the brake tabs ③ to lock and unlock the wheels.

Mounting your tripod:

1. Remove your Magnus tripod's rubber feet if they're attached. Then, fit the slot in the tripod's spiked feet onto the leg supports ②. You may need to adjust the tripod's leg length or spreader angle to properly fit the tripod feet into the leg supports.

2. Pull the locking straps ④ onto the notches on the outer edges of the tripod feet.

Working Footprint: 37 in. (94 cm)

Maximum Load: 132 lb. (59.9 kg)

Folded Length: 20 in. (50.8 cm)

Wheel Diameter: 4 in. (10.2 cm)

Images are for illustrative purposes only

ONE-YEAR LIMITED WARRANTY

This MAGNUS product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider's responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider's discretion, of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function. This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specific legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Magnus Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Magnus along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.magnustripods.com or call Customer Service at 212-594-2353.

MAGNUS

A Gradus Group Brand

Product warranty provided by the Gradus Group.

www.gradusgroup.com

MAGNUS is a registered trademark of the Gradus Group.

© 2021 Gradus Group LLC. All Rights Reserved.