MX-CPV2035 - Griddle Mx Onda - Free user manual and instructions

Product Type	Steam Iron
Brand	Mx Onda
Model	MX-CPV2035
Power	2200 W
Voltage	220-240 V ~ 50/60 Hz
Water Tank Capacity	300 ml
Soleplate	Non-stick ceramic
Temperature Control	Adjustable dial with settings from minimum to maximum
Steam Control	Adjustable steam regulator (minimum to maximum)
Vertical Steam Function	Yes, accessible via a button
Anti-scale Filter	Removable cartridge
Power Indicator Light	Yes (on/off button)
Weight	Approximately 1.2 kg
Dimensions	30 x 15 x 20 cm (approx.)
Safety Features	Do not immerse in water; contact official service if damaged
Maintenance	Descale regularly using the anti-scale filter
Included Accessories	Water tank, anti-scale filter cartridge

Frequently Asked Questions - MX-CPV2035 Mx Onda

How do I use the vertical steam function?

Hold the iron vertically 5–15 cm from the garment, then press the steam button. This is useful for removing wrinkles from hanging clothes or curtains.

How do I descale the iron?

After use, turn off and unplug the iron. Remove the water tank and the anti-scale filter cartridge. Clean the cartridge under running water and replace it. Regular descaling prolongs the iron's life.

What should I do if the iron is damaged or the cord is frayed?

Do not attempt to repair it yourself. Turn off the iron, unplug it, and contact the nearest Mx Onda Official Technical Service for assistance.

Can I use tap water in the iron?

Yes, but to reduce scale build-up, it is recommended to use distilled or demineralized water. The anti-scale filter helps but regular cleaning is still advised.

How to clean the soleplate?

Allow the iron to cool completely. Wipe the soleplate with a damp cloth. Do not use abrasive cleaners. For stubborn residues, use a mild vinegar solution and rinse.

Why is no steam coming out?

Check that the water tank is filled, the temperature selector is set to a steam zone (usually high heat), and the steam regulator is not set to minimum. If the iron is cold, steam will not be produced.

Is it safe to leave the iron unattended while plugged in?

No, never leave the iron unattended when connected to the power supply. Always turn off and unplug after use. Store in a safe, dry place.

How do I store the iron after use?

Turn off and unplug. Set temperature and steam controls to minimum. Let it cool completely, then empty the water tank and store the iron upright on its heel.

What is the anti-scale filter and how does it work?

The anti-scale filter is a removable cartridge inside the water tank that captures mineral deposits from water. It helps prevent scale build-up in the steam chamber. Clean or replace it periodically.

How do I adjust the temperature?

Turn the temperature selector dial to the desired setting (usually marked with fabric symbols). For steam, ensure the setting is in the steam range (high temperature). Wait for the indicator light to go out before ironing.

USER MANUAL MX-CPV2035 Mx Onda

Una vez agotada la vida útil de este producto eléctrico, no lo tire a la basura doméstica.

Deposítelo en el contenedor adecuado de un punto limpio de su localidad, para su posterior reciclado.

Este producto cumple con la Directiva Europea RoHS (2002/95/CE), sobre la restricción de uso de determinadas sustancias peligrosas en aparatos eléctricos y electrónicr5 otnspuvesty alegricón sopaño Idiaonto e Rea I208/2000o.

- En caso de avería, anomalías, sí la plancha se ha caído, la clavija u otras partes presentan deterioro, o el cable está dañado, apague el aparato y no intente repararlo por su cuenta. Póngase en contacto con el Servicio Técnico Oficial MX ONDA más cercano.

Antes de manipular el centro de plan1 h(pula)lencompruebpula:

Para evitar accidentes extreme las precauciones en este modo de uso. Nunca lo utilice en un vestido puesto sobre una persona, hágalo sobre una percha. Nunca dirija el vapor hacia las personas. Tenga en cuenta que el vapor en esta posición apenas si es visible.

Siga el proceso del planchado con vapor, y luego sostenga la plancha en posición vertical entre 5 cm y 15 cm de la prenda (Fig. 7).

Presione el botón y se producirá el vapor vertical. Esta función es sobre todo útil para quitar pliegues de cortinas o de prendas colgadas en una percha.

:

Nunca conecte el centro de planchado sin que esté colocado en su posición el cartucho del filtro antical.

Al terminar las labores de planchado proceda como se indica a continuación:

• Apague el centro de planchado presionando el botón de encendido /apagado y desconéctelo de la red eléctrica.
• Gire el selector de temperatura a la posición de mínimo “”.
• Ajuste el regulador de vapor a la posición de mínimo “”.
• Deje que se enfríe totalmente.
• Extraiga el depósito de agua y el filtro antical.