PS406UC - Power bank CyberPower - Free user manual and instructions

Product Type	Portable Power Bank
Brand	CyberPower
Model	PS406UC
Capacity	10,000 mAh
Battery Type	Lithium-ion
Input Port	Micro USB: 5V/2A
Output Port 1	USB-A: 5V/2.1A
Output Port 2	USB-C: 5V/3A
Total Output	Max 3A
LED Indicators	4 LEDs for battery level
Charging Time	Approx. 5-6 hours
Dimensions	135 x 68 x 15 mm
Weight	215 g
Safety Features	Overcharge, overdischarge, short circuit, and overcurrent protection
Compatibility	Smartphones, tablets, and other USB devices
Operating Temperature	0°C to 45°C
Material	Plastic casing with matte finish
Included Accessories	Micro USB cable, user manual
Warranty	2 years

Frequently Asked Questions - PS406UC CyberPower

How do I charge the CyberPower PS406UC power bank?

Use the included Micro USB cable to connect the power bank to a USB wall charger or computer. The LED indicators will show the charging status. A full charge takes approximately 5-6 hours.

How many devices can I charge simultaneously?

The PS406UC has two output ports: one USB-A and one USB-C. You can charge two devices at the same time, with a combined maximum output of 3A.

What devices are compatible with this power bank?

It is compatible with most USB-powered devices, including smartphones, tablets, Bluetooth headphones, and cameras. Ensure the device's charging current does not exceed the port's output.

How do I check the remaining battery level?

Press the power button on the side of the power bank. The four LED lights will indicate the battery level: one light = 25%, two = 50%, three = 75%, four = 100%.

Can I use the power bank while it is charging?

Yes, but it is not recommended as it may increase charging time and generate more heat. It is best to charge the power bank fully before using it to charge other devices.

Is it safe to leave the power bank plugged in overnight?

Yes, the PS406UC has built-in overcharge protection. Once fully charged, it will automatically stop charging to prevent damage. However, it is always good practice to unplug when fully charged.

What should I do if the power bank gets wet?

Immediately disconnect any devices and do not attempt to charge. Allow it to dry completely in a well-ventilated area. If moisture has entered the device, discontinue use and consult a professional.

How should I store the power bank when not in use?

Store it in a cool, dry place away from direct sunlight and extreme temperatures. Ideally, keep it at around 50% charge for long-term storage to prolong battery life.

Does the power bank support fast charging?

The PS406UC does not support Quick Charge or other fast charging protocols. It delivers standard 5V output at up to 2.1A on USB-A and 3A on USB-C.

What is the warranty period for this product?

CyberPower offers a 2-year warranty for the PS406UC power bank. Please retain your proof of purchase and contact CyberPower support for any warranty claims.

USER MANUAL PS406UC CyberPower

4-Outlet Power Station with 5 USB Ports and Glowing Multi-Color Feature

PS406UC

USER MANUAL

CONGRATULATIONS ON YOUR PURCHASE

Thank you for selecting the CyberPower PS406UC Power Station. This manual explains the features and operation of the PS406UC. Please take a few moments to read this manual.

FEATURES

1. Four Standard Grounded Outlets (4)
2. USB Charging Ports* (5)

USB-C Innovative power volume to meet the demands of a wide variety of products from monitors to small laptops and beyond.

USB-A Connect and charge up to 4 USB devices using the USB charging ports.

*USB outlets cannot be used as a USB hub. This device does not transfer data.

1. 6ft Braided Cord with Right Angle, Low Profile Plug
2. Glowing Multi-Color Feature

a. When the product is plugged in, the glowing LED light cycles through colors of the rainbow.
b. Press this button to select the light color that you prefer.
c. Press this button again to activate the default full color cycle.
d. Press and hold the button for 3 seconds to turn off the glowing feature.

SPECIFICATIONS

• Model Number: PS406UC
- Outlets: 4 Standard Grounded Outlets
- USB Charging Rating:

a. Type-A 4 ports 5 V/4.2A shared
b. Type-C 1 port PD 45 W 3 A (5/9/15 V), 2.25 A (20 V)
• Electrical Rating: 125 V/12 A/1500 W

1

CAUTION

TO REDUCE THE RISK OF ELECTRIC SHOCK - Use only in dry locations and only indoors. DO NOT plug into another relocatable power tap. DO NOT "daisy chain" this device. DO NOT use with any aquarium equipment.

DO NOT use if properly grounded outlets are not available. DO NOT install this device if there is less than 10 meters (30 feet) or more of wire between the electrical outlet and electrical service panel.

DO NOT use for medical or life support equipment.

TECHNICAL SUPPORT

Please contact our Tech Support Department with installation, troubleshooting, or general product questions.

• Phone: [phone]
- Email: [e-mail]
• Hours of Operation:

Monday - Friday 7:00am - 6:00pm CST

2

1-YEAR LIMITED WARRANTY

Read the following terms and conditions carefully before using the CyberPower PS406UC (the "product"). By using the product, you consent to be bound by the terms and conditions of this 1-year limited warranty. IF YOU DO NOT AGREE TO THE TERMS AND CONDITIONS OF THIS WARRANTY, YOU SHOULD RETURN THE PRODUCT FOR A FULL REFUND PRIOR TO USING IT.

Who is providing this warranty, and what does it cover?

Cyber Power Systems (USA), Inc. (“CyberPower”) provides this 1-year limited warranty. It only covers the original purchaser and ends if you no longer own the product. This warranty covers defects in materials and workmanship in the product under normal use and conditions. This warranty covers the product for as long as you own the product, up to 1 year from date of purchase.

What must I do to make a warranty claim?

Call us at [phone], or write to us at:

Cyber Power Systems (USA), Inc.

4241 12th Avenue East, Suite 400

Shakopee, MN 55379,

or send us an email at [e-mail] within 10 days of the occurrence for instructions.

1. Identify the product and the purchase date.
2. Provide a dated purchase receipt (or other proof of the original purchase) and provide a description of the defect.
3. Pack and ship the product to CyberPower and all claim forms that are provided to you. Show the claim number on the shipping label, or include it with the product. You must prepay all shipping costs. You are responsible for packaging and shipment, and you must pay the cost of the repair estimate.
4. Do each of these within ten days of the occurrence.

What will CyberPower do to correct problems?

CyberPower will inspect and examine the product. If the product is defective in material or workmanship, CyberPower will replace it at CyberPower's expense, or CyberPower will refund the full purchase price you paid for the product (purchase receipt showing price paid is required).

Who pays for shipping?

We pay shipping when we send items to you; you pay when you send items to us.

What are some things this Warranty does not cover?

1. THIS WARRANTY DOES NOT COVER: ANY SOFTWARE THAT WAS DAMAGED, SOFTWARE THAT NEEDS TO BE REPLACED DUE TO THE FAILURE OF THE PRODUCT, OR ANY DATA THAT IS LOST AS A RESULT OF THE FAILURE. THIS WARRANTY DOES NOT COVER THE RESTORATION OF DATA OR RECORDS, OR THE REINSTALLATION OF SOFTWARE.
2. This warranty does not cover: misuse, modification, operation or storage outside of the environmental limits of the product or the equipment connected to it. It does not cover damage while in transit or in storage; if there has been improper operation or maintenance, or use with items not designed or intended for use with the product, such as laser printers, appliances, aquariums, medical, or life support devices, etc.

3

What are the other limitations?

The sole and exclusive remedies of the initial customer are those provided by this warranty.

1. This warranty does not apply unless the product and the connected equipment were connected to properly wired and grounded outlets (including compliance with electrical and safety codes of the most current electrical code), without the use of any adapters or other connectors.
2. The product must have been plugged directly into the power source. The equipment connected to the product must be directly connected in the product, not "daisy chained" together in serial fashion with any extension cords, another product, or device similar to the product, surge suppressor, or power tap. Any such installation voids the warranty.
3. The product and connected equipment must have been used properly in a suitable environment, in conformance with any applicable license, instruction manual, or warnings.
4. The product must have been used at all times within the limitations on the product's maximum rated wattage.

Where can I get more information?

Contact us at:

Cyber Power Systems (USA), Inc.

4241 12th Avenue East, Suite 400

Shakopee, MN 55379;

Call us at [phone];

Send us an email message at [e-mail].

PRODUCT REGISTRATION

Prompt product registration assures coverage under the limited lifetime warranty, and also allows the opportunity of notifications for product enhancements, upgrades, and other announcements.

Registration is quick and easy. Go to the Product Registration Page at CyberPowerSystems.com/registration.

CONTACT INFORMATION

Cyber Power Systems (USA), Inc.

4241 12th Avenue East, Suite 400

Shakopee, MN 55379

Toll-free: 1-877-297-6937 | CyberPowerSystems.com

4

CONFORMANCE APPROVALS

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This Class B digital apparatus complies with Canadian ICES-003.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

⚠ WARNING: This product can expose you to chemicals including bisphenol A (BPA) and styrene (ABS), which is known to the State of California to cause reproductive harm and cancer.

For more information, go to www.P65Warnings.ca.gov.

Please join CyberPower in caring for the environment by recycling.

RoHS

This device is manufactured using environmentally-safe procedures in compliance with the Restriction of Hazardous Substances (RoHS) directive.

© 2019 Cyber Power Systems (USA), Inc. All rights reserved. All other trademarks are the property of their respective owners.

CyberPowerSystems.com

K01-1101055-00