95-7376B - Car kit Metra - Free user manual and instructions

Product Type	Car Radio Installation Kit
Brand	Metra
Model	95-7376B
Vehicle Compatibility	Hyundai Elantra 2017-up
Radio Provision	ISO DDIN
Color	Matte Black
Included Components	Radio trim panel, radio brackets
Required Tools	Panel removal tool, Phillips screwdriver
Wiring Harness (sold separately)	70-7304 (without 7-inch display radio) or 70-7306 (with 7-inch display radio)
Antenna Adapter (sold separately)	N/A (without 7-inch display radio) or 40-KI11 (with 7-inch display radio)
Safety Precaution	Connect all accessories and air bag indicator lights before cycling ignition. Do not remove factory radio with key in on position or while vehicle running.
Support Phone	1-800-253-TECH
Manual Format	PDF, 4 pages
Manual Language	English

Frequently Asked Questions - 95-7376B Metra

Which vehicles is the Metra 95-7376B compatible with?

The Metra 95-7376B is designed for the Hyundai Elantra 2017-up.

What radio size does this kit accommodate?

It provides an ISO DDIN radio provision, so it fits double DIN (ISO DDIN) radios.

What tools are needed for installation?

You will need a panel removal tool and a Phillips screwdriver.

Does the kit come with a wiring harness and antenna adapter?

No, the wiring harness and antenna adapter are sold separately. Use harness 70-7304 (without 7-inch display) or 70-7306 (with 7-inch display), and antenna adapter 40-KI11 (with 7-inch display).

How do I remove the dashboard for installation?

Start by opening the passenger front door, unclip the side trim, remove one screw, and unclip the silver trim. Repeat on the driver side. Then unclip the panels above the steering column and around the instrument cluster. Remove two screws from the radio trim panel, then four screws securing the radio itself. See the manual for detailed steps.

What should I do before turning the ignition on?

Make sure all accessories, switches, climate controls, and especially air bag indicator lights are connected before cycling the ignition to avoid warning lights.

Can I install this kit if I have a factory 7-inch display?

Yes, but you will need the appropriate wiring harness (70-7306) and antenna adapter (40-KI11), both sold separately.

Where can I purchase the wiring harness and antenna adapter?

Metra and AXXESS offer proper mating adapters. Check with your local retailer or online for part numbers 70-7304, 70-7306, and 40-KI11.

My installation isn't working. What should I do?

Double-check that the installation was done exactly as per the instructions. If issues persist, call Metra Tech Support at 1-800-253-TECH with the vehicle apart for troubleshooting.

Is professional certification recommended for installation?

Metra recommends MECP certified technicians for best results. You can also enhance skills at the Installer Institute (www.installerInstitute.com).

USER MANUAL 95-7376B Metra

INSTALLATION INSTRUCTIONS FOR PART 95-7376B

Hyundai Elantra 2017-up 95-7376B

KIT FEATURES

• ISO DDIN radio provision - Painted matte black

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets

A

B

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: 70-7304 (without 7-inch display radio) • 70-7306 (with 7-inch display radio)

Antenna Adapter: N/A (without 7-inch display radio) • 40-KI11 (with 7-inch display radio)

Table of Contents

Dash Disassembly 2

Kit Preparation....3

Kit Assembly

- ISO DDIN radio provision .... 3

TOOLS REQUIRED

- Panel removal tool • Phillips screwdriver

CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the Ignition. Also, do not remove the factory radio with the key in the on position, or while the vehicle is running.

95-7376B

Dash Disassembly

1. Open the passenger front door, then unclip and remove the trim panel from the side of dashboard. Remove the (1) Phillips screw securing the silver trim panel.
2. Unclip and remove the silver trim panel that runs along the dashboard from under the radio, and above the glovebox.
3. Open the driver's door, then unclip and remove the trim panel from the side of the dashboard. Remove the (1) Phillips screw securing the silver trim panel.
4. Unclip and remove the silver trim panel from under the driver's side A/C vent.
5. Unclip the trim panel above the steering column, and then unclip and remove the entire panel surrounding the instrument cluster. Note, these two panels are one assembly.
6. Remove the (2) Phillips screws securing the radio trim panel, then unclip and remove the panel.
7. Remove the (4) Phillips screws securing the radio and then remove.

Continue to Kit Assembly

Please visit Metraonline.com for dash disassembly illustrations.

95-7376B

Kit Preparation Kit Assembly

1. Remove the (3) Phillips screws securing the A/C vents to the radio trim panel and then remove.
2. Secure the vents onto the radio trim panel using the factory hardware.

Please visit Metraonline.com for kit preparation illustrations.

ISO DDIN radio provision

1. Attach the radio brackets to the radio using the screws supplied with the radio. (Figure A)
2. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or AXXESS. Test the radio for proper operation.
3. Secure the assembly into the dash opening using the factory hardware.
4. Snap the radio trim panel over the radio assembly, and then reassemble the dash in reverse order of disassembly.

(Figure A)

INSTALLATION INSTRUCTIONS FOR PART 95-7376B

IMPORTANT

If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.

KNOWLEDGE IS POWER

Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerInstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

Metro recommends MECP certified technicians