CS29N - Hair straightener Conair - Free user manual and instructions

Product Type	Hair Straightener
Brand	Conair
Model	CS29N
Plate Material	Ceramic Tourmaline
Plate Width	1 inch (25 mm)
Temperature Range	140°C - 230°C (adjustable with dial)
Heat-up Time	30 seconds
Auto Shut-off	Yes, after 60 minutes
Dual Voltage	Yes (100-240V, global use)
Power Consumption	30 W
Cord Length	6 ft (1.8 m)
Swivel Cord	Yes
Dimensions (L x W x H)	10 x 1.5 x 2 inches (25.4 x 3.8 x 5 cm)
Weight	0.5 lbs (227 g)
Cleaning	Wipe cool plates with a damp cloth; do not immerse
Safety	Auto shut-off, heat-resistant stand, cool tip
Warranty	2 years limited
Color	Black with silver accents

Frequently Asked Questions - CS29N Conair

How do I adjust the temperature on the Conair CS29N?

The Conair CS29N has a dial on the handle that allows you to select temperatures from 140°C to 230°C. Turn the dial to your desired heat setting.

Can I use the CS29N straightener on wet hair?

No, always use the straightener on dry hair to avoid damage. Towel-dry or blow-dry your hair first.

Does the Conair CS29N have an auto shut-off feature?

Yes, it has an auto shut-off that turns off the straightener after 60 minutes of inactivity for safety.

Is the CS29N dual voltage?

Yes, it works on 100-240V, so you can use it internationally with a plug adapter.

How do I clean the ceramic plates?

Unplug and let the straightener cool completely. Wipe the plates with a damp cloth. Do not use abrasive cleaners or immerse in water.

What is the warranty for the Conair CS29N?

It comes with a 2-year limited warranty. Contact Conair customer service for claims.

How long does it take to heat up?

The straightener heats up in about 30 seconds to the maximum temperature.

Can I use the CS29N for curling as well?

Yes, the straightener can be used to create curls by twisting the plates around sections of hair. Use with caution.

What is the cord length?

The cord is 6 feet (1.8 meters) long and swivels for easier styling.

Does it come with a heat-resistant mat or case?

The packaging includes a heat-resistant stand for safe placement during use.

USER MANUAL CS29N Conair

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be taken, including the following:

READ ALL

INSTRUCTIONS BEFORE VOWING

BEFORE USING KEEP AWAY

KEEP AWAY FROM WATER

DANGER

electrically live even when the switch is off. To reduce the risk of death by electric shock; 1. Always unplug appliance immediately after using.

1. Do not use while bathing or in the shower
2. Do not place or store appliance where it can fall or be pulled into a tub or sink.

3. Do not place in, or drop into water or other liquids.

4. If an appliance falls into water, unplug it immediately. Do not reach Into the water.

WARNING — To reduce the risk of burns, electrocution, fire, or injury to persons: 1. This appliance should never be left unattended when plumped in.

1. Do not pull, twist, or wrap line cord around appliance.

2. This appliance should not be used by, on or near children or individuals with certain disabilities.

3. Use this appliance only for its intended use, as described in this manual. Do not use attachments not recommended by the manufacturer.

4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been dropped, damaged, or dropped into water. Return the appliance to an authorized service center for examination and repair.

5. Keep the cord away from heated surfaces.

6. Never use while sleeping.

7. Never drop or insert any object into any opening or hose.

8. Do not use outdoors or operate where aerosol (asray) products are being used or where oxygen is being administered.

9. Unit is hot when in use. Do not let his surfaces touch eyes or skin.

10. Do not place the heated unit directly on any surface while it is hot or plugged in.

11. However, the air surface of the

12 Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of hair. Int and other debris.

1. Do not use an extension cord with this appliance.

2. Do not touch hot surfaces of the appliance. Use handles or knobs.

3. Do not attempt to touch the housing of your appliance near the straightening plates, as it is not when in use.

4. Do not use with a voltage converter.
5. This appliance is not a toy. Keep away from children.

SAVE THESE INSTRUCTIONS

OPERATING INSTRUCTIONS

This fat iron is intended for household use. Use on Alternating Current (60 hertz) only. This unit is designed to be operated at 120 volta NC.

This appliance has a polarized plug (one blade is wider than the other. As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

NOTE: Do not use this styling appliance on hair extensions.

STYLING WITH THE NEW EASY-GLIDE, SHEA BUTTER-INFUSED, OTTAWO GRATER FLOATING PLATE

ONE plate of your new flat iron is designed with a little give to "float" in the iron. This provides better contact with hair and eliminates gaps to achieve straighter results faster. The shea button-infused, easy-glide, ceramic-coated surface is one of the inlet and best technological advances in hair appliances. The ceramic, oven-host

distribution produces the ultimate in silky, silky, healthy-looking hair. You'll find that hair glides easily over the surface of the plates as you're straightening and that it is easier to clean styling product reader, etc., off the plates after each use. The ceramic surface also helps smooth down byaways. As you smooth your hair, heat is evenly distributed so that the style you create has a salon-perfect, silky smooth, silky finish. Hair also places right through the plaques after it's straightened.

USING INSTANT HEAT, THE HIGH HEAT TEMPERATURE SETTINGS & UNIFORM HEAT RECOVERY SWITCH

This flat iron maintains constant temperature during use for precision styling. Conal's professional salon standards of engineering provide you with a uniform and improved heat recovery system that maintains the iron at constant temperatures. There is a constant surge of power to ensure that heat is continuously and quickly delivered for optimal styling results, unlike other units, which lose heat during use. This provides consistent styling power so that every standard of your hair gets the same level of heat and comes out the same way for a perfect finish.

The appliance's 5 temperature settings and instant heat technology combine to provide styling versatility for all hair textures. If you have fine hair, a low temperature will provide the best results. If you have thick, wavy or textured hair, keep the heat setting high. You can vary the appliance's temperature according to your particular need!

TEMPERATURE SETTING GUIDE

LED TEMP. CONTROL HAIR TYPE
Forward/Lox 330°F Fine/Thin Hair
Medium 365°F	Medium/Normal/Hair
Vard High 200°F Many/Curry Hair
High Max 419/475/F Soft/Lox/Thick Hair

SHEA BUTTER-INFUSED PLATES our new flat iron is designed with shea

coor-irrused, ceramic-coated plaats, which help protect hair, minimize damage and add saline with each case.

GETTING STARTED

Plug the flat iron ore into any household outlet (100g). Press the ON/OFF button. The power light will illuminate. Press the "-" and "-" buttons to select your desired head selling. To turn off, press the ON/OFF button.

WARNING: The flat iron's ceramic-coated plates will get very hot within a few seconds and should not come into contact with the skin after the flat iron has been turned on.

Never leave your appliance on and unattended. However, should you fail to turn the unit off, it will shut itself off automatically within 60 minutes.

GET TO KNOW YOUR FLAT IRON

TO STRAIGHTEN HAIR

Hair should be clean and completely dry before using the flat iron. For best results, use a light styling product before blow-drying hair.

1. Start with a hair section that is 1½ inches wide and no more than ½ inch thick.

2. Open the iron and place the hair section between the two hot plates, close to the scalp. Trap hair between the plates by firmly squeezing the handles together.

3. While maintaining the tension, slowly pull the unit down along the hair section toward the ends. At the ends, release the pressure on the handle and allow the hair to slide out.

4. Repeat the process on additional sections of hair until you achieve the hairstyle you desire. It may be necessary to repeat the process on certain areas, depending on the lecture of your hair.

Some experience is necessary when learning to use this flat iron. After using the iron several times, you will learn the ideal way to straighten and style your hair.

ADD VOLUME AND SHAPE

To add flips and waves, secure ends between the plates and wrap hair around the outer housing. It's an easy way to add shape to straight styles. Turn your wrist up or under to create flips and add curl or more body.

FEDERAL COMMUNICATIONS COMMISSION NOTICE

WARNING: Changes or modifications to this and not expressly approved by the party responsible for compliance could visit the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must contact any interference received, including interference that may cause undesled operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment opens up, uses and uses

the equipment manufacturer, also can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocale the receiving antenna. - Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

- Benefit the dealer or an experienced radio-TV technician for help.

SUPPLIER'S DECLARATION OF CONFORMITY

Brand: InfitPRO by Conair ^5

Model No.: C5294

Desorption: 1/2 Inch Flat Iron

Responsible Party: Consir LLC,

- Cambridge Road, Road, Shenford, CT 06902 [phone]

Standard: FCC Post 15 Subiect D

ANSI C63.4-2014

This device complies with Part 15 of the FOC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause unbearable operation.

DATE OF ISSUE: XOOO

USER

MAINTENANCE

Your flat iron is virtually maintenance free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, allow it to cool and wipe cooler with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer. CAUTION

NEVER allow the power supply cord to be pulled, twisted, or severely bent. Never wrap the cord lightly around the appliance. Damage will occur at the high flex point of entry into the appliance, causing it to rupture and short circuit, inspect the cord frequently for damage. Stop use immediately if damage is visible or if unit stops or operates intermittently.

STORAGE

When not in use, your iron is easy to store. Allow appliance to cool, then simply store out of reach of children in a safe, dry location. Do not jerk or strain cord at plug connections. Do not wrap the line cord around the appliance. Allow the cord to hang or lo loose and straight at the point of entry into the appliance.

KEEP AWAY FROM WATER

Everyone knows that electricity and water are a dangerous combination. But did you know that an electric appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.

ALWAYS UNPLUG SMALL APPLIANCES

LIMITED FIVE-YEAR WARRANTY (U.S. AND CANADA ONLY)

Consin will repair or replace (at our option) your unit free of charge for 60 months from the date of purchase if the appliance is defective in workmanship or materials. To obtain service under this warranty, return the defective product to the service center listed on back, together with your purchase receipt. California residents need only provide proof of purchase and should call 1-800-3-CONVR for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 90 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 60-MONTH DURATION OF THIS IMPRIETEN, LIMITED WARRANTY.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH

OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion or limitation of special, incidental or consequential damages, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

BEAUTY TIPS To achieve the looks you love and for more great infinite PRO by Conair® products, visit infinite.com

Please register this product at www.pcnair.com/registration

SERVICE CENTER CUNNAR LLC Service Department 7470 N. Glen Harbor B Bierdale, AZ 85907

©2021 Consair LLC

For info on any Consir product, call 1-800-3-CONIR or visit us on the web at www.conair.com

21P9074612

FLAT IRON

Parla responsible: Corsair LLC, 1 Cummings Point Road, Stamford, CT 06902 (200)203 561

Normas: Normas de la FCC.

Service Department 7475 N. Glen Harbor Blvd

Brendale, A7 25307

©2021 Constr LLC