805-041 - Electric razor Marquant - Free user manual and instructions

Product Type	Electric Razor
Brand	Marquant
Model	805-041
Power Source	Rechargeable Battery
Battery Type	Ni-MH
Charging Time	8 hours
Operating Time	30 minutes
Shaving System	Rotary
Number of Heads	3
Trimmer	Pop-up
Washable	Yes, under running water
Dimensions (Approx.)	6 x 3 x 2 inches
Weight	0.5 lbs
Voltage	100-240V, 50/60Hz
Cleaning	Rinse under tap, brush included
Safety	Auto shut-off, waterproof
Accessories	Charger, cleaning brush
Repairability	Replacement heads available

Frequently Asked Questions - 805-041 Marquant

How long does the battery last on a full charge?

The battery lasts approximately 30 minutes of shaving time after a full 8-hour charge.

Can I use this razor while it is charging?

No, the Marquant 805-041 cannot be used while charging; it is designed for cordless use only.

Is the razor waterproof?

Yes, it is waterproof and can be rinsed under running water for easy cleaning.

How often should I replace the shaving heads?

It is recommended to replace the shaving heads every 12 to 18 months for optimal performance.

What type of battery does it use?

It uses a Ni-MH rechargeable battery that is built-in.

Does it come with a travel lock?

No, the Marquant 805-041 does not have a travel lock feature.

Can I use it with shaving cream or gel?

Yes, it can be used with shaving cream or gel for a smoother shave.

How do I clean the razor?

Remove the shaving heads and rinse them under running water. Use the included brush to clean the foil and cutter.

What voltage does the charger support?

The charger supports 100-240V, 50/60Hz, so it can be used worldwide with an adapter.

Where can I find replacement parts?

Replacement shaving heads and foils can be purchased from Marquant or authorized retailers.

USER MANUAL 805-041 Marquant

User Instructions for Shaver

805-041

SV Bruksanvisning i original

NO Bruksanvisning i original

EN Operating instructions in original

SÄKERHETSANVISNINGAR

Read the User Instructions carefully before use

The appliance is designed for household use only.

IMPORTANT:

• The perforated plates on the shaver head are very thin. It can be deformed or damaged if clenched or knocked.
• Do not use a shaver with a damaged plate, this can irritate the skin.

IMPORTANT:

• Do not charge the shaver at temperatures below 0^ , in direct sunlight or in very humid conditions.
• Only use the charger with the supplied mains adapter.
• The shaver should be completely dry when it is charged.
• Do not expose the adapter to water. Do not touch it if your hands are wet.
• Grip the adapter when pulling it out from the power socket. Pulling the power cord could damage it.
• Store the adapter in a dry and safe place.
• Avoid pulling, twisting or sharply bending the power cord.
• Do not wind the cord round the appliance.
• The perforated plates on the shaver head are very thin and must be handled carefully. Do not use the shaver if the plates, or an inner blade, are damaged to avoid personal injury.
• Rinse the shaver in running water. Do not use salt water, or boiling water. Do not use detergents intended for toilets, bathrooms or kitchens. Do not immerse the shaver in water.
• Do not wipe any part of the shaver with thinner, petrol or alcohol. Use a cloth moistened with soapy water.
• Do not take the casing apart, this could affect the waterproof design.
• Do not use the shaver in the shower.
• The appliance must never be cleaned with water when the power cord is connected.
• Keep out of the reach of children.
• Keep these instructions in a safe place.
• Contact an authorised service centre if you have any questions on maintenance, or damage etc.
• The device is not intended to be used by persons (children or adults) with any form of functional disorders, or by persons who do not have sufficient experience or knowledge on how to use it, unless they have received instructions concerning the use of the device by someone who is responsible for their safety.
• Keep children under supervision to make sure they do not play with the appliance.

WARNING: The shaver is not intended for wet shaving. Risk of electric shock and personal injury.

- Do not use the shaver in the shower.

TECHNICAL DATA
Rated data, in	220 V, 50 Hz
Rated data, out	2.4 VDC, 90 mA
Charging time	8 hours
USE

Charging

• Before using the shaver for the first time, or when it has not been used for a prolonged period, you should charge it for 12 hours. The battery charger should be connected to 220 V/50 Hz.
• Connect the mains adapter to the shaver and plug the plug into a power socket. The charging lamp goes on.
• Charge the shaver for 8 hours. The batteries will last longer if the appliance is used until they are completely discharged and then charged to full capacity again.
• Do not charge the appliance for too long. There is a risk of the damaging batteries if they are overcharged.

AC only

• Do not use the shaver in the shower.
• Do not use products such as shaving foam, gel, soap, or lotion etc.
• Connect the mains adapter to an AC power socket and switch off the shaver. Connect the power cord to the shaver.
• If the shaver does not start immediately, charge it for about one minute and try again.

Shaving

1. Switch on the shaver with the power switch. Hold the shaver at right angles (90°) to your skin. Do not press the shaver too hard in the beginning.
2. Stretch out your skin with the other hand, and move the shaver back and forwards in the direction of the beard. You can gradually press harder as your skin gets used to the shaver. Pressing too hard does not result in a closer shave, but can irritate the skin, especially in the beginning.

Shaver heads

The shaver has two shaver heads. They are separately spring-loaded to adapt to the shape of your face.

Trimming

1. Open the trimmer by pushing up the trimmer handle.
2. Hold the trimmer at right angles to your skin and move it downwards to trim sideboards.

MAINTENANCE

Cleaning

WARNING: Risk of electric shock and personal injury. Unplug the power cord from the shaver and switch it off before cleaning.

1. We recommend cleaning the appliance with water and liquid soap for good hygiene. Regular cleaning produces better shaving and prevents bad odour.
2. Pour a little liquid soap on the shaver heads.
3. Switch on the shaver and rinse the shaver heads in a little water.
4. Switch off the shaver after about 10-20 seconds. Take off the perforated plate and clean it under running water.
5. Wipe the shaver with a dry cloth. Leave the protective cover off so that the shaver heads can dry out properly.

Cleaning with a brush

1. Press the shaver head release buttons and lift off.
2. Remove the inner shaver blades one at once by gripping the short sides and pulling straight up.
3. Use the longer brush to clean the shaver head, casing and trimmer. The inner shaver blades can be cleaned with the short brush. Do not use the short brush for the shaver head plates.

Jula reserves the right to make changes. In the event of problems, please contact our service department.

www.jula.com

Care for the environment!

Must not be discarded with household waste! This product contains electrical or electronic components that should be recycled. Leave the product for recycling at the designated station e.g. the local authority's recycling station.