CP7207 - Lawn mower COMELEC - Free user manual and instructions

Type	Hair Clipper Set
Brand	COMELEC
Model	CP7207
Voltage	220-240V AC ~
Frequency	50 Hz
Power	10 W
Blade Alignment	Upper blade teeth must coincide point by point with lower blade; maximum gap 1.2mm
Lubrication	Use only the supplied lubricating oil; lubricate frequently
Cut Regulator	Adjustable near thumb for varying cut length without changing comb
Guide Combs	4 combs: No.1 (3mm), No.2 (6mm), No.3 (9mm), No.4 (12mm)
Cut Length Range	3mm to 12mm with combs; shortest cut without comb
Intended Use	Home use only, suitable for family
Safety Features	Unplug before cleaning; keep dry; supervision for children; do not use with broken combs
Warranty	2 years (conditions apply)
Manufacturer	PRAGMATICA GRUPO EUROPEO, S.L., Spain
Country of Origin	China
Compliance	EU Directive 2004/108/EC; EN 55014, EN 61000
Recycling	Do not dispose as municipal waste; separate collection per WEEE

Frequently Asked Questions - CP7207 COMELEC

How do I clean the hair clipper?

Unplug the clipper before cleaning. Remove the blade and brush away hair debris. Wipe the body with a dry cloth. Do not immerse in water.

How often should I oil the blades?

Lubricate the blades frequently with the supplied oil. For best performance, oil before and after each use.

How do I adjust the blade alignment?

If blades are misaligned, loosen the screws, align so upper teeth point coincide with lower teeth and max gap is 1.2mm, then retighten.

What comb lengths are included?

Four combs: No.1 (3mm), No.2 (6mm), No.3 (9mm), No.4 (12mm). Each comb is labeled in the middle.

How do I attach or remove the guide comb?

To attach, hold the comb at the top and slide it onto the clipper until it locks. To remove, pull it away from the blades. Do not force.

What should I do if the clipper stops cutting well?

First oil the blades. If still not cutting, replace the blades with new ones. Also, clean any hair stuck between blades.

Can children use this hair clipper?

Children aged 8+ can use it under supervision. People with reduced capabilities must have appropriate instructions. Keep cord out of reach of children.

What is the warranty period?

The product comes with a 2-year warranty. The warranty does not cover damage from misuse or failure to follow instructions.

How do I achieve a very short flat top cut?

Start with the 12mm comb, cut from back to crown. Use supplied comb to shape top. Finish with shorter combs for sides and nape.

Is it safe to use without a guide comb?

Yes, but extra care is needed to avoid skin cuts. Always ensure the comb guide is not damaged. Do not use if broken.

USER MANUAL CP7207 COMELEC

Thank you for purchasing this COMELEC product, this device has been checked in all its components meticulously, so we guarantee the correct operation, but for this to be the case we need that YOU read the instruction book carefully, as this will contribute to the best performance of this article. P.G.E., S.L guarantees to the buyer of this product, a total guarantee of TWO YEARS, governed by the established conditions whose regulation is found in Royal Legislative Decree 12/007 of 16 December, which approves the revised text of the General Law for the Defense of Consumers and Users, (articles 114 to 127) P.G.E., S.L is committed to repairs are completely free, labor and spare parts, including. The Technical Assistance Service will resolve any repairs that may be required by this apparatus. Carefully review the INSTRUCTION BOOK included, on the use, maintenance and conservation of the device. Any anomaly that could occur due to the non-observance of such instructions will not be protected for the guarantee. The date of sale of the device, for the purposes of warranty period, will be that which appears on the purchase invoice. Guarantee operation: As regards all those compliance defects detected by the technical assistance, which are manifested within six months of the delivery of the goods, it is assumed that they already existed on that date, the intervention will be completely free, (unless this hypothesis is incompatible with the nature or nature of the conformity defect). During the following eighteen months, it must be the user who demonstrates. That the lack of conformity It was coming at the time of delivery.

MANUFACTURED CHINA FOR COMELEC

DECLARATION OF CONFORMITY

Manufacturer: PRAGMATICA GRUPO EUROPEO, S.L

Adress: Tapisers 10 Poligono Industrial Els Mollons

Post Code, 46970 City: Alaquas VALENCIA

We declare under our responsibility that the product: Product Description: Unit Clings Re

Product Description: Hair Clipper Set Model CP7207

Model CF1207 Brand: COMELEC

It complies with the European Union legislation in compliance

with the 2004/108 / EU guidelines

The standards apply:

EN 55014-1:2006+A1:+A2:

EN 55014-2: 1997+A1+A2:

EN 61000-3-2:2006+A1:+A2:

EN 61000-3-3:2013

Name:

Position :

Date:

Signature:

Pablo Gonzalez

Administrador

30 Julio 2021

INFORMATION ON RECYCLING

Disposal of the old appliance, the European Directive 2002/96 / EC on waste equipment Electrical and Electronic (WEEE), establishes that old appliances can not be thrown municipal waste without normal classification. Appliances have to be collected separately with the to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The symbol "container with wheels" crossed out on the product reminds you of obligation, that when you dispose of the device must be collected separately.

Consumers should contact the local or retail authority

to obtain information about the correct disposal of your

old device.

Pragmatica Grupo Europeo, S.L

Tapissers 10 Poligono Industrial Els Mollons

46970 Alaquas VALENCIA Tfno. 963 313 252

USER.

DATE OF SALE

Seller's signature and stamp

IMPORTANT: To make the guarantee effective, the SELLER must fill out, sign and stamp this Certificate. To receive assistance under the conditions set forth in this certificate, please submit to the Technical Service Authorized, this document next to the Purchase Invoice.

MANUAL DE INSTRUCIONES SET CORTAPELOS CP 7207

Black and white photo of a hairless electric toothbrush (no text or symbols visible)

CARACTERISTICAS TÉCNICAS

Modelo : CP 7207

Voltaie: 220-240V \~

Frecuencia 50 Hz

Potencia: 10 W

Black and white photo of a hair styling tool with a 'Lear' button, no visible text or symbols on the device itself.

SUITABLE FOR FAMILY USE.

This product is for home use only.

TECHNICAL SPECIFICATIONS

Model :	CP 7207
Voltage:	220-240V ~
Frequency.	50 Hz
Power:	10 W

PLEASE READ THE INSTRUCTIONS CAREFULLY OF THIS MANUAL BEFORE STARTING.

DO NOT HANDLE THIS HAIR CLIPPER INTERNALLY

The texts, photos, colors, figures and data correspond to the current technical level from the moment they have been printed. We reserve the right to modifications motivated by the permanent development of the technique in our

MANUAL DE INSTRUÇÕES CABELO SET TRIMMER MODELO CP 7207

Close-up of a black and silver hairless electric toothbrush with a white filter, labeled 'CE' below (no other text or symbols visible)

ADEQUADO PARA USO DA FAMÍLIA.

Thank you for purchasing this COMELEC product, this device has been checked in all its components meticulously, so we guarantee the correct operation, but for this to be case we need that YOU read the instruction book carefully, as this will contribute to the best performance of this article. P.G.E, S.L. guarantees to the buyer of this product, a total guarantee of TWO YEARS, governed by the established conditions whose regulation is found in Royal Legislative Decree 1/2007 of 16 December, which approves the revised text the General Law for the Defense of Consumers and Users, (articles 114 to 127) P.G.E, S.L is committed to repairs are completely free, labor and spare parts, including. The Technical Assistance Service will resolve any repairs that may be required by this apparatus. Carefully review the INSTRUCTION BOOK included, on the use, maintenance and conservation of the device. Any anomaly that could occur due to non-observance of such instructions will not be protected for the guarantee. The date of sale of the device, for the purposes of warranty period, will be that which appears on the purchase invoice. Guarantee operation: As re gards all those compliance defects detected by the technical assistance, which are manifested within six months of the delivery of the goods, it is assumed that they already existed on that date, the intervention will be completely free, (unless this hypothesis is incompatible with the nature or nature of the conformity defect). During the following eighteen months, it must be the user who demonstrates. That the lack of conformity It was coming at the time of delivery.

MANUFACTURED CHINA FOR COMELEC

DECLARATION OF CONFORMITY

Manufacturer:	PRAGMATICA GRUPO EUROPEO, S.L
Adress:	Tapisers 10 Poligono Industrial Els Mollons
Post Code,	46970 City: Alaquas VALENCIA
We declare under our responsibility that the product:
Product Description:	HAIR CLIPPER
Model:	CP7207
Brand:	COMELEC
It complies with the European Union legislation in compliance with the 2004/108 / EU guidelines:
The standards apply:
EN 55014-1: 2006+A1:+A2:
EN 55014-2: 1997+A1:+A2:
EN 61000-3-2:2006+A1:+A2: / EN 61000-3-3:2013
Name:	Pablo Gonzalez
Position :	Administrator
Date:	25 Agosto 2021
Signature:

INFORMATION ON RECYCLING

Disposal of the old appliance, the European Directive 2002/96 / EC on waste equipment Electrical and Electronic (WEEE), establishes that old appliances can not be thrown as municipal waste without normal classification. Appliances have to be collected separately with the to optimize the recovery and recycling of the materials they contain and reduce the impact on human health and the environment. The symbol "container with wheels" crossed out on the product reminds you of obligation, that when you dispose of the device must be collected separately.

Consumers should contact the local or retail authority to obtain information about the correct disposal of your old device.

Pragmatica Grupo Europeo, S.L.

Tapisers 10 Poligono Industrial Els Mollons

46970 Alaquas VALENCIA Tfno. 963 313 252

USER

DATE OF SALE

Seller's signature and stamp

IMPORTANT: To make the guarantee effective, the SELLER must fill out, sign and stamp this Certificate. To receive assistance under the conditions set forth in this certificate, please submit to the Technical Service Authorized, this document next to the Purchase Invoice.

READ THE INSTRUCTIONS AND KEEP THEM FOR FUTURE REFERENCE PARTS BLADES ADJUSTMENT

Your hair clipper has been correctly aligned before it leaves the factory. The blade can be realigned for cleaning or replacement. To realign them, make sure that the teeth of the blade coincide point by point. upper with the lower blade, the upper gap with the lower blade, the upper gap with the lower blade maximum must be 1.2mm . Compare your hair clipper to the drawing. If the alignment is incorrect, with a screwdriver loosen the blade, realign it, and screw it back in.

OIL:

For its correct operation, use the lubricating oil supplied with the set. Lubricate the hair trimmer frequently and do not use any other type of lubricant.

Cut regulator:

The cutting regulator is strategically placed near your thumb (if you handle the hair clipper with your right hand), which makes it easy to use during the cutting process. The cut regulator adds versatility to the use of your short hair, allowing you to vary the cut length without changing the accessory.

When the blades are in the highest position the haircut will be the shortest, as you go down the length of the cut will increase. In the lowest position the length of the cuts will be approximately that of comb 1. The regulator can also be used with each of the supplied combs. Also since the blades are very tight, using the regulator helps you remove any combs that have stuck. When the clipper is running, move the slider quickly a couple of times from the "short" to "long" position this will help keep your short hair free of hair. When you see that the hair trimmer no longer cuts well, replace the blades with new ones.

SECURITY ADVICE

When using the electrical appliance, basic precautions should always be followed, including the following guidelines. Read the manual before use.

• To reduce the risk of burns, fire, electric shock, or injury to persons: * This appliance can be used by children 8 years of age or older and people with physical, sensory or mental disabilities or lack of experience and knowledge, if they have been given adequate supervision or instructions on how to use the appliance safely and understand the dangers involved. * Children must not play with the appliance. Cleaning and maintenance to be carried out by the user *It should not be performed by children unless they are over 8 years old and under supervision. Keep the appliance and its cord out of the reach of children. * Supervision is required when this appliance is used by or near children or invalids. *Use this appliance only for its intended use, as described in this manual. Do not use accessories not recommended by the manufacturer. * Never drop or insert any object into the openings on this apparatus.

* To avoid damage to the skin, extra care should be taken when using the hair clipper without the guide comb. If the comb guide is damaged or broken, stop using immediately and replace the comb otherwise it may cut the skin. * Unplug the hair trimmer before cleaning. * Keep the appliance dry. * Children must be supervised to ensure that they do not play with the appliance. * Do not unplug the trimmer by pulling on the cord. * Before use make sure the blades are correctly aligned. * Do not leave the appliance on any surface when it is in operation. * Do not use the hair clipper if the adjustment combs are broken, you could be injured by the blades.

TIPS FOR HAIR CUTTING

* Inspect the appliance and make sure that it is free of oil and that it is working properly. Dry with a cloth Before starting the haircut. *Seat the person you are cutting their hair at a height that they feel comfortable with and have a good overview of the cut. *Before starting the cut sometimes the comb gets tangled in the hair, let it go gently and wind as normal. * Place a towel or cutting cape over the neck and shoulders of the person you are cutting hair for.

ADVICE

Cut the hair gently without sudden movements. Use short strokes and gradually go over the entire head. Sometimes strands of hair will come out, then go over any gaps that have been left. To attach the comb, hold it at the top and slide it through the hair clipper until it locks into place. To remove it, pull it to the opposite side of the blades. Do not force the comb when putting it on or taking it off, it should go in smoothly, otherwise it could break it.

START OF CUT

The haircut requires practice, therefore, it is better to leave the hair a little long the first cuts, as you gain practice use the combs for shorter cuts.

COMBS SUPPLIED (See drawings)

Comb number 1: Leaves the cut at 3mm in length

Comb number 2: Leaves the cut at 6mm in length

Comb number 3: Leaves the cut at 9mm in length

Comb number 4: Leaves the cut at 12mm in length

Each comb is marked in the middle.

To attach the comb, hold it at the top and slide it through the hair clipper until it locks into place. To remove it, pull it to the opposite side of the blades. Do not force the comb when putting it on or taking it off, it should go in smoothly, otherwise it could break it.

STEP 1 CUTTING THE NUCA.

1. Attach the 3 or 6 mm comb
2. Keep the hair clipper pointed up and towards the center of the head.
3. Hold the clipper comfortably and firmly at the same time and make cuts in the direction indicated, towards the center of the head. Cut and trim the excess hair a little at a time.
4. Use the same procedure for trimming the sides, starting at the base of the neck and ending at the top of the ears (SEE DRAWING 1)

DIBUJO 1

DIBUJO 2

DIBUJO 3

DIBUJO 4

DIBUJO 5

DIBUJO 6

DIBUJO 7

STEP 2 BACK OF THE HEAD

Change the longer cutting comb 9 or 12 mm and cut the back of the head (SEE DRAWING 2) STEP 3 SIDE OF THE HEAD

Change the cutting comb on the sides of the head, pass 3 or 6mm and trim the sideburns and ears. Then use the other combs, 9 or 12mm , for trimming the top of the head (SEE DRAWING 3)

STEP 4 TOP OF THE HEAD

Using the 9 or 12 mm combs, cut the top of the head, in the opposite direction that the hair usually grows, (SEE DRAWING 4). Use the 3 or 6 mm comb, when you want to make a short or very short haircut. For long hairs on the top of the head use the supplied comb and scissors. Cut using the comb or fingers as a stop, according to the desired hair length (SEE DRAWING 5) Always cut from the top of the head forward. You can combine the cut with the fingers, comb and cut hairs at will.

Finally use the hair clipper without a comb to define and trim around the base of the nape and around the ears.

To get a clean line around the sideburns, use the trimmer in an inverted position. normal use (SEE DRAWING 6).

VERY SHORT STYLISH CUTS

Start with the longest cutting comb (12mm), cut from the back to the crown. Hold the hair clipper and cut gently as indicated in DRAWING 7.

Use the same procedure starting from the bottom of the head as indicated in the drawing. For a smooth "Flat Top LooK" top use the supplied comb to cover the top.

Use the different combs supplied to contour the neck profile to the desired cut style.

Comb the hair and go over the entire surface of the head with the indicated procedure until obtaining a haircut to your liking.

NOTE: ANY DEFECT OF THE APPLIANCE DUE TO MISUSE OR MAINTENANCE BY THE CONSUMER WILL NOT COME WITHIN THE WARRANTY PERIOD GIVEN BY THE MANUFACTURER OR IMPORTER.