HEMNES 303.528.83 - Shelf IKEA - Free user manual and instructions

Find the device manual for free HEMNES 303.528.83 IKEA in PDF.

IKEA HEMNES 303.528.83 - Shelf
📄 56 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice IKEA HEMNES 303.528.83 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product TypeShelf Unit
BrandIKEA
ModelHEMNES 303.528.83
MaterialSolid Pine, Clear Lacquer
Dimensions (W x D x H)89 cm x 35 cm x 89 cm
Weight18 kg
Max Load per Shelf15 kg
Number of Shelves3
Adjustable ShelvesYes
Assembly RequiredYes
Tools ProvidedAllen Key, Screws, Dowels
Care InstructionsWipe with damp cloth, dry immediately
Safety FeaturesAnti-Tip Strap Included
Warranty10 Years
Country of OriginChina
Delivery FormatFlat Pack
FinishNatural

Frequently Asked Questions - HEMNES 303.528.83 IKEA

How difficult is it to assemble the HEMNES shelf?
Assembly is straightforward with the included instructions and tools. It typically takes one person about 30-45 minutes. Follow the step-by-step guide and use the provided Allen key.
Can I wall-mount this shelf?
Yes, the HEMNES shelf comes with an anti-tip strap for safety. You can secure it to the wall using appropriate hardware (not included). Ensure the wall can support the weight.
What is the maximum weight per shelf?
Each shelf can hold up to 15 kg evenly distributed. Do not exceed this limit to avoid damage.
How do I clean and maintain the shelf?
Wipe with a damp cloth and dry immediately. Avoid using harsh chemicals or abrasive cleaners. For stubborn stains, use a mild soap solution.
Are the shelves adjustable?
Yes, the three shelves can be repositioned at different heights by moving the shelf pins. There are multiple pre-drilled holes for flexibility.
What materials is the shelf made of?
The main material is solid pine with a clear lacquer finish. This gives it a natural look and durability.
Can I paint or stain the shelf?
Yes, you can paint or stain the shelf. Sand lightly before applying primer or stain. Ensure proper ventilation and follow paint manufacturer instructions.
What should I do if a part is missing or damaged?
Contact IKEA customer service with your model number (303.528.83) and purchase details. They will send replacement parts free of charge within the warranty period.
Is the shelf stable on uneven floors?
The shelf has adjustable feet to level it on slightly uneven surfaces. Twist the feet to raise or lower corners until stable.
Can I disassemble and reassemble the shelf?
Yes, you can disassemble it following the instructions in reverse. However, repeated assembly may loosen the dowel joints. Use wood glue for extra stability if reassembling.

User questions about HEMNES 303.528.83 IKEA

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

Your email remains private: it is only used to notify you if someone answers your question.

No questions yet. Be the first to ask one.

Download the instructions for your Shelf in PDF format for free! Find your manual HEMNES 303.528.83 - IKEA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HEMNES 303.528.83 by IKEA.

USER MANUAL HEMNES 303.528.83 IKEA

English

WARNING!

Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over this furniture must be used with the wall attachment device(s) provided.

Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.

Spanish

WARNING!

Two line drawings of birds on different platforms: one with a crosshair and the other with a bird-like figure.

Two stylized human figures standing on wooden blocks, one crossed with a diagonal line.

Illustration comparing two scenes: one showing a person with a thought bubble and question mark, the other showing a person holding an IKEA store with a phone.

Diagram showing a mechanical or structural assembly with warning symbols and labeled components, likely illustrating safety or hazard.

Abstract line drawing of a person assembling or securing a 3D block structure.

1IKEA HEMNES 303.528.83 - WARNING! - 6

6xIKEA HEMNES 303.528.83 - WARNING! - 7

112399 110630IKEA HEMNES 303.528.83 - WARNING! - 8

IKEA HEMNES 303.528.83 - WARNING! - 9

6xIKEA HEMNES 303.528.83 - WARNING! - 10

IKEA HEMNES 303.528.83 - WARNING! - 11

12x 14xIKEA HEMNES 303.528.83 - WARNING! - 12

Simple line drawing of a mushroom-shaped object with a circular top and base.

6x10x 10x|12x

Simple line drawing of a hand holding a sheet of paper with a diagonal line.

2IKEA HEMNES 303.528.83 - WARNING! - 15

100823IKEA HEMNES 303.528.83 - WARNING! - 16

Technical line drawing of a mechanical bracket with two circular holes.

Technical line drawing of a mechanical gear assembly with threaded shaft and flanged base.

102728

Technical line drawing of a mechanical clamp or bracket component.

1x 4x 4x 4x2xTechnical line drawing of a metal L-shaped bracket with a hole and side notations.

2x

16xIKEA HEMNES 303.528.83 - WARNING! - 21

Line drawing of a mechanical screw with hexagonal end.

17x

2xIKEA HEMNES 303.528.83 - WARNING! - 23

6xIKEA HEMNES 303.528.83 - WARNING! - 24

104171 6xIKEA HEMNES 303.528.83 - WARNING! - 25

101350IKEA HEMNES 303.528.83 - WARNING! - 26

122723IKEA HEMNES 303.528.83 - WARNING! - 27

112399 110630 20x 9x 16xIKEA HEMNES 303.528.83 - WARNING! - 28

Pure line drawing of a Y-shaped mechanical component.

1x

Line drawing of a pedestal with a circular top and base, no text or symbols present.

2x

IKEA HEMNES 303.528.83 - WARNING! - 31

IKEA HEMNES 303.528.83 - WARNING! - 32

Simple line drawing of two dome-shaped objects on a rectangular base, no text or symbols.

102384 11x 1x

16xTechnical line drawing of a mechanical switch device with mounting bracket and base plate, no text or symbols.

2x 2x

Technical line drawing of a mechanical device with two screws and a bracket, no text or symbols.

Simple line drawing of a hand holding a sheet of paper with a diagonal line, no text or symbols present.

Illustration of various mechanical components including bolts, screws, and a pin, no text or labels.

Line drawing of a rectangular drawer with handle and side lock, no text or symbols.

Line drawing of a rectangular metal enclosure with mounting holes, no text or symbols.

Line drawing of a rectangular metal enclosure with mounting holes, no text or symbols.

Technical line drawing of a rectangular metal frame with two side brackets, no text or symbols.

Technical line drawing of a rectangular metal frame with two flanges and a central recess, no text or symbols.

Technical line drawing of a rectangular metal enclosure with two recessed panels and mounting holes, no text or symbols.

Diagram illustrating three steps of folding a drawer into a box, with a 12x6 ratio label indicating the quantity.

1

Illustration of various screw and nut components, no text or labels.

4x 101345 101350 101345

22x 123492 101350 101345

3

Technical line drawing of a metal frame assembly with two vertical plates and mounting feet (no text or symbols)

42x 112399 110630

5Technical line drawing of a structural frame with a downward arrow indicating compression or clearance (no text or symbols)

6Technical line drawing of a structural panel with an arrow indicating compression or assembly (no text or symbols present)

74x 110519

88 2x 130501 4x 108462

9 1x 123 105344 154892 109049 105344 1x 4 5 105344

10Technical diagram illustrating a mechanical assembly with labeled components and directional arrows indicating motion or transformation.

Line drawing of a wooden drawer with a hand pointing to the interior (no text or symbols)

Diagram showing hand positioning and folding a document with page number 16

111 4x 101345 101350 101345

122 4x 123492

13Technical line drawing of a two-panel installation with mounting brackets and support posts (no text or symbols)

144x 112399 110630

15 16Technical line drawing of a structural frame with a vertical panel and a downward arrow indicating compression or force (no text or symbols).

Technical line drawing of a structural frame with an arrow indicating downward force or compression (no text or symbols).

174x 110519

182x 130501, 4x 108462

19, 1x 123, C, 105344, 154892, 109049, 105344, 1x 4, 5, 105344

202x 100413, 2x 117615

Simple line drawing of a wooden drawer with a hand pointing to the side (no text or symbols).

21Illustration of various screw and nut components (no text or labels).

4x 101345, 101350, 101345

224x 123492

23Technical line drawing of two rectangular panels mounted on a base plate, with mounting holes and support fixtures (no text or symbols).

244x 112399, 110630

Technical line drawing of a two-panel metal frame structure with mounting holes and support beams (no text or symbols).

25 26Technical line drawing of a structural frame with a downward arrow indicating compression or force (no text or symbols).

Technical line drawing of a two-tiered rectangular enclosure with a downward arrow indicating compression or clearance (no text or symbols).

276x 110519

282x 130501, 4x 108462

291x 1 105344, 2 154892, 1x 3 109049 105344, 4 5 105344

3030, 2x 100413, 2x 117615

31, 100001, 2x 100211, 100212, 32, 4x 102728

3333, 6x 101350

34, 6x 100211, 100212, 100001

3535, 16x 118331

36, 4x 128711

37, 3x 107716, 107716, 130501, 3x 107716, CR

38Technical line drawing of a structural assembly with a vertical panel and horizontal supports, showing no text or symbols.

392x 112399, 110630

4040, 2x 101350

412x 112399, 110630

421x 101350, 1x 101350

432x 112399 110630

441x 101350 1x 101350

45

2x 112399 110630

46Line drawing of a mechanical assembly with hands holding components, no text or symbols present

488x 112399 110630

Technical line drawing of a structural frame with a curved arrow indicating rotation (no text or symbols)

492x 102384 121360 121361 1x 107716 121360 121361 121360 121361

5060 2x 101350

51

100001 7x 100211 100212

Technical line drawing of a structural frame with an arrow indicating rotation (no text or symbols)

Two gray rectangular blocks with a diagonal black X mark, one vertical and one horizontal, separated by a dashed line (no text or symbols)

52Technical line drawing of a structural frame assembly with two views showing internal components (no text or symbols)

53

Technical diagram showing a structural assembly with labeled components and directional arrows indicating assembly steps.

54Illustration of two people assembling a large panel inside a metal frame, with magnified insets showing the same components (no text or symbols present)

55

Diagram illustrating a physical therapy procedure with two individuals demonstrating the same technique, showing hand placement and force application steps.

Illustration of two people assembling a large panel or tray with a curved arrow indicating rotation (no text or symbols).

56

Two technical diagrams showing a tomato-shaped object on a flat surface and a cross symbol on a grid-like surface (no text or labels).

3x 109560 122723

573x 109560 122723 3x 109560 122723

Technical line drawing showing a folding panel being rotated by a curved arrow, with no text or symbols present.

58Technical diagram of a multi-level cabinet with labeled components and a magnified inset showing gear shift mechanism.

Diagram showing a warning sign with an arrow pointing to a mechanical or structural component, indicating caution or hazard.

Simple line drawing of a person assembling or securing a 3D block structure (no text or symbols).

5959 2x 109560 100823 119256 100823

601x 101560

612x 2x

Mechanical assembly diagram showing a bracket with mounting holes and a curved arrow indicating motion (no text or symbols).

62 2x 123746 2x 123772

632x 2x

Mechanical assembly diagram showing a clamping mechanism with arrows indicating motion (no text or symbols).

64 123 4x Click!

652x 100413 117615

iLine drawing of a cabinet with drawers and a door, showing internal components and directional arrows (no text or symbols)

Three circular diagrams showing mechanical components with rotating arrows, no text or symbols present

Line drawing of a cabinet with drawers and doors, showing internal door opening (no text or symbols)

Three-step diagram showing mechanical assembly with arrows indicating rotation or adjustment (no text or symbols)

Line drawing of a wooden cabinet with drawers and doors, showing internal structure and an open door (no text or symbols)

Three-step diagram showing mechanical assembly with arrows indicating rotation or adjustment (no text or symbols)

666x 104171 6x 106414

67Technical diagram illustrating the assembly of a cabinet with labeled parts and directional arrows indicating motion or movement.

68Line drawing of a cabinet with open doors and internal shelves, showing two downward arrows indicating internal movement (no text or symbols present)

69Technical line drawing of a mechanical drawer with a handle and roller, showing internal components (no text or symbols)

iLine drawing of a cabinet with shelves and doors, showing structural connection (no text or symbols)

Line drawing of a hand inserting a component into a device (no text or symbols)

Mechanical assembly diagram showing a clamping mechanism with rotating components (no text or symbols)

Table of contents Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : IKEA

Model : HEMNES 303.528.83

Category : Shelf