LA05T - Loudspeaker Audibax - Free user manual and instructions

Product Type	Passive Ceiling Speaker
Brand	Audibax
Model	LA05T
Outside Diameter	170 mm
Depth	58 mm
Loudspeaker System	1-way
Woofer Size	4.5 inches
Impedance	8 ohms
Power Taps	1.5 W / 3 W / 6 W
SPL	91 dB
Frequency Response	150 Hz - 20 kHz
Material (Baffle)	ABS
Grille Material	Metal
100V Line Compatible	Yes
Mounting Type	Flush mount with dog-ear clamps
Cutout Template Provided	Yes
Warranty Period	24 months against hidden defects
Safety Note	No mains power to speaker; use proper gauge wire; avoid obstructions behind panel
Application	Microphone calls and background music in restaurants or stores

Frequently Asked Questions - LA05T Audibax

What is the Audibax LA05T speaker used for?

The Audibax LA05T is a passive ceiling speaker designed for 100V line systems, ideal for distributing microphone calls and background music in restaurants, commercial stores, and similar environments.

What are the power tap options for the LA05T?

The LA05T offers selectable power taps of 1.5 W, 3 W, and 6 W for 100V line systems.

How do I install the Audibax LA05T speaker?

1. Use the cutout template to mark the hole. 2. Ensure no obstructions behind the panel. 3. Remove the grille by turning the dog-ear clamps outward and pushing. 4. Tighten the dog-ear screws slightly inward. 5. Connect wires and insert speaker. 6. Tighten screws carefully. 7. Reattach grille.

What is the impedance of the LA05T?

The LA05T has an impedance of 8 ohms.

What is the frequency response of the LA05T?

The frequency response is 150 Hz to 20 kHz.

Can I connect the speaker directly to mains power?

No, never connect mains power to the speaker. It is designed for 100V line audio systems only. Doing so will damage the speaker.

What is the warranty period for Audibax LA05T?

The warranty covers hidden defects for 24 months from purchase, provided the product is used according to instructions and returned in original packaging with proof of purchase.

What cable gauge should I use for long runs?

Use cable of the right gauge for long runs to avoid signal loss. Maintain proper polarity with clear color indication throughout the system.

How do I avoid damaging the speaker?

Avoid loud microphone feedback, use undamaged wires, do not overtighten mounting screws, and ensure the mounting panel can support the speaker's weight.

What is the outside diameter and depth of the LA05T?

The outside diameter is 170 mm and the depth is 58 mm.

USER MANUAL LA05T Audibax

LA-T series

USER GUIDE

The LA-T range is a series of passive ceiling speakers designed for the 100v line, with a woofer from 4.5 inches to 6.5 inches. The LA-T series is the perfect choice for the distribution of microphone calls and background music both for restaurants or commercial stores. The mounting frame is made of high quality ABS. The grille is made of metal. The LA-T is available in white.

SAFETY PRECAUTION

• Keep this manual for future reference.
• When cutting the mounting hole for the speaker, make sure there is sufficient clearance behind the panel (no obstructions like A/C channels, power lines, etc).
  • Take care of your speaker wires, they should be free of damage. Damaged speaker wires might result in poor sound quality and can damage amplifiers.
• Only use accessories specified by the manufacturer.
  • Make sure the mounting panel can support the speakers weight.
• Use sufficient amount of speakers to avoid dead spots.
• No mains power shall be connected to the loudspeakers, doing so will damage the speaker.
• This apparatus should only be serviced by qualified personnel. If not warranty might be void.
• Use cable of the right gauge, certainly for long runs.
• Use cables with clear color indication and maintain polarity throughout the whole system.
• Avoid loud feedback from microphones, this can damage your speaker.
• Please check the units condition after unpacking. If the outside of the carlon box has been damaged, inform your shipper immediately.

WARRANTY INFO

The warranty for hidden defects can only be considered if they appear within the 24-month warranty period. The warranty is not valid in case of misuse, wear, power surges, improper packaging or shipping, improper use or storage and failure to comply with Audibax recommendations. The product must be returned in the original packaging with proof of purchase made by an authorized distributor of Audibax

①

MOUNT THE SPEAKER

The loudspeaker is easy to install, due to its simple mounting system.

(1) Use the cutout template to mark the mounting hole.

(2) When making the hole in your mounting panel, double check if there are no cables or any other obstructions behind the mounting panel. Cutting the mounting panel without this check might result in damaged infrastructure or power lines. Please make sure that the mounting structure is capable of safely supporting the speaker's weight.

(3) Remove the speaker grille: turn the mounting clamps (dog-ears) outwards and push them in the direction of the grille until it pops out. Remove the grille.

(4) Turn the dog-ears inwards again and lighten the dog-ear screws slightly to make them stay in the inward position.

(5) Connect the speaker wires and insert the speaker in the precul speaker opening.

(6) Fosten the dog-ear screws carefully until the speaker sits safely in place. Do not overlighten the dog-ear screws!

(7) Carefully push the grille back in place.

SPECIFICATIONS LA-T

	Model	Model
Characteristics	LA05-T	LA06-T
Outside diameter	170mm	222mm
Depth	58mm	75mm
Loudspeaker system	1 way	1 way
Woofer size	4,5"	6,5"
Tweeter size	N/A	N/A
Impedance	8 ohmios	8 ohmios
Power	1,5w/3w/6w	1,5w/3w/6w
SPL	91	91
Frequency	150HZ-20KHZ	150HZ-20KHZ
Material	ABS	ABS
Grille material	Metal	Metal
100W Line	Yes	Yes

AUDIBAX

ALTAVOZ DE TECHO

Serie LA-T

GUÍA DEL USUARIO