208-160 - Multiplexeur vidéo HDMI Steren - Free user manual and instructions

Product Type	Power Cord
Brand	Steren
Model	208-160
Connector Type (Device End)	IEC C7 (Figure-8)
Connector Type (Plug End)	NEMA 1-15P (2-prong flat)
Number of Prongs	2
Length	1.8 m (6 ft)
Wire Gauge	18 AWG
Rated Voltage	125 V
Rated Current	7 A
Rated Power	875 W
Material	PVC jacket, copper conductors
Color	Black
Temperature Rating	-20°C to 60°C
Jacket Type	Round, flexible
Safety Certifications	UL listed, CSA certified
Country of Origin	Mexico
Compatible Devices	Audio/video equipment, monitors, printers, adapters
Maintenance	Wipe with dry cloth; avoid bending sharply
Storage	Store in a dry place away from direct sunlight

Frequently Asked Questions - 208-160 Steren

What devices can I use the Steren 208-160 power cord with?

The Steren 208-160 is compatible with devices that have an IEC C7 figure-8 power inlet, such as many audio/video equipment, monitors, printers, and external power adapters.

What is the maximum current rating of this cord?

The cord is rated for a maximum current of 7 A at 125 V, which translates to a maximum power of 875 W.

Is the cord polarized?

No, the NEMA 1-15P plug is non-polarized, meaning it can be inserted either way into the outlet. The IEC C7 connector is also symmetric.

Can I use this cord outdoors?

This cord is designed for indoor use only. It has a PVC jacket rated for dry locations. Prolonged outdoor exposure may damage the cord.

How long is the Steren 208-160 power cord?

The cord length is approximately 1.8 meters (6 feet), which is suitable for most desktop setups.

Is the cord compatible with international voltages?

The cord is rated for 125 V AC only. For use with 220-240 V systems, you must ensure the connected device is compatible and use an appropriate plug adapter if needed (though the cord itself does not convert voltage).

What is the weight of this power cord?

The cord weighs approximately 0.1 kg (0.22 lbs).

Can I replace a damaged 208-160 cord with any other figure-8 cord?

Yes, as long as the replacement cord has an IEC C7 connector and is rated for at least the same voltage and current (125 V / 7 A), you can use it. However, always match or exceed the original specifications.

How should I clean and maintain the cord?

Unplug the cord before cleaning. Use a dry, soft cloth to wipe the surface. Do not use liquids or abrasive cleaners. Avoid bending the cord sharply to prevent internal wire damage.

Does this cord have surge protection?

No, the Steren 208-160 is a standard power cord without any surge protection. It only provides a physical electrical connection. Use a surge protector for sensitive devices.

USER MANUAL 208-160 Steren

Line drawing of a plug with two pins and a U-shaped cable (no text or symbols)

CONEXIÓN

STEREN PRODUCTO EMPACADO S.A. DE C.V.

Autopista México-Querétaro, Km 26.5, sin número, Nave Industrial 3-A, col. Lomas de Boulevares, Tlalnepantla de Baz, Estado de México, C.P. 54020, RFC: SPE-941215-H43