CXW-200-E750C2 - Kitchen hood HAIER - Free user manual and instructions

Product Type	Kitchen Hood
Brand	Haier
Model	CXW-200-E750C2
Installation Type	Wall-mounted
Extraction Type	Ducted / Recirculation (with charcoal filter)
Maximum Airflow	200 m³/h
Number of Speeds	3
Control Type	Touch controls
Lighting	2 x 1.5 W LED lamps
Grease Filter	Aluminum mesh, washable
Charcoal Filter	Optional for recirculation mode
Noise Level (max speed)	≤ 55 dB
Motor Power	200 W
Energy Class	A
Product Dimensions (WxDxH)	750 x 500 x 400 mm
Weight	15 kg
Power Supply	220-240 V, 50 Hz
Material	Stainless steel
Warranty	2 years

Frequently Asked Questions - CXW-200-E750C2 HAIER

How to install the Haier CXW-200-E750C2 kitchen hood?

Installation should be performed by a qualified professional. The hood must be mounted at a minimum height of 65 cm above the cooking surface. Use the provided brackets and screws to secure it to the wall. Connect the ducting for external extraction or insert the charcoal filters for recirculation mode. Ensure the power supply matches the specifications.

How to clean the grease filter?

The aluminum mesh grease filter should be cleaned regularly. Remove it by pressing the latch and pulling it out. Wash with warm water and mild detergent or in a dishwasher at low temperature. Allow to dry completely before reinstalling.

How to replace the LED lamps?

Switch off the hood and disconnect power. Gently pry out the LED lamp cover using a flat screwdriver. Remove the faulty lamp and insert the new one (1.5 W, suitable for kitchen hoods). Reattach the cover and restore power.

Why is the hood noisy during operation?

Noise can be due to loose ducting, a clogged filter, or resonance with the wall. Ensure all connections are tight, clean the grease filter, and check that the hood is mounted securely. If noise persists, contact Haier support.

How to change the charcoal filter for recirculation?

If using the hood in recirculation mode, the charcoal filter needs replacing every 3-6 months. Remove the grease filter, then slide out the old charcoal filter. Insert the new one (make sure it is compatible) and reassemble.

What is the recommended maintenance schedule?

Clean the grease filter every month or when the indicator shows. Replace the charcoal filter every 3-6 months. Wipe the exterior with a damp cloth. Check ducting connections annually. Have the motor inspected by a professional every two years.

How to operate the touch controls?

Touch the power button to turn on/off. Use the speed buttons (1, 2, 3) to adjust extraction intensity. Touch the light button to toggle the LED lamps. If equipped, touch and hold the timer button to activate automatic shut-off.

Why is the hood not extracting air properly?

Check if the grease filter is clogged, the ducting is blocked or kinked, or the charcoal filter is saturated (recirculation mode). Also ensure the room has adequate air supply for balanced ventilation.

Can I use the hood without ducting?

Yes, the hood can be used in recirculation mode by installing charcoal filters. The air is cleaned and returned to the kitchen. Note that charcoal filters must be replaced periodically for effective odor removal.

How to reset the filter saturation indicator?

After cleaning or replacing filters, press and hold the filter reset button (usually marked with a filter icon) for 3-5 seconds until the indicator light turns off. If your model does not have a reset button, disconnect power for 10 seconds.

USER MANUAL CXW-200-E750C2 HAIER

Line drawing of a kitchen chimney with a door and ventilation grilles (no text or symbols)

型号：

CXW-200-E750C2

CXW-200-E750C3

目录

产品特点……1

用前须知……1

技术数据·装箱单…2

安装指导……3

使用指南……4

清洁维护……5

故障处理……6

Certificate of Quality

检验员

产品经检验合格准予出厂

青岛 洗碗机有限公司

地址：青岛经济技术开发区海尔工业园内

(1)外装饰罩

(7)电机

(2)后腔

(8)叶轮

(3)集烟罩

(9)手紧螺母

(4)油杯

(10)

(5)止逆阀

风圈

(6)蜗壳

(11)导油板

3 技术数据·装箱单

技术数据

Line drawing of a laptop with hands holding it, no text or symbols present

Technical line drawing of a mechanical component with no visible text or symbols

- 安装止逆阀