XS400PROG - Gaming chair KeepOut - Free user manual and instructions

Product Type	Gaming Chair
Brand	KeepOut
Model	XS400PROG
Overall Dimensions (approx.)	50 x 50 x 120 cm (adjustable height)
Seat Height Range	45 - 55 cm
Seat Dimensions (approx.)	50 x 50 cm
Backrest Height (approx.)	75 cm
Armrests	2D adjustable (height + rotation)
Recline Angle	90° to 135°
Gas Lift Class	Class 3
Base Material	Nylon
Caster Material	Nylon (60 mm)
Upholstery Material	PU Leather
Filling Material	High-density foam
Weight Capacity	120 kg
Net Weight (approx.)	15 kg
Recommended User Height	160 - 190 cm
Cleaning Method	Apply polish on soft cloth, rub stains; do not apply polish directly
Contact	[e-mail]
Warranty	2 years (typical)

Frequently Asked Questions - XS400PROG KeepOut

How do I assemble the KeepOut XS400PROG gaming chair?

Assembly instructions are included in the manual. Typically, you attach the base to the gas lift, then mount the seat and backrest. Use the provided Allen key. Ensure all bolts are tightened securely.

How can I adjust the seat height?

Use the lever located under the seat on the right side. Lift the lever while sitting to raise the seat, or lift it while standing to lower it.

How do I recline the backrest?

Pull the recline lever (usually on the right side of the seat) and lean back. Release the lever at the desired angle. The chair reclines from 90° to 135°.

What is the weight capacity of this chair?

The maximum weight capacity is 120 kg (265 lbs). Do not exceed this limit to avoid damage or injury.

How should I clean the chair?

If there are stains, apply a small amount of polish on a soft towel and rub the stains until they dissolve. Do not apply polish directly on the chair surfaces. Wipe with a dry cloth afterward.

Can I replace the gas lift?

Yes, the gas lift is replaceable. You can purchase a compatible Class 3 gas lift. To replace, disassemble the base and seat, remove the old lift, and install the new one. Consult the manual for details.

How do I adjust the armrests?

The armrests are 2D adjustable. Press the button on the side of the armrest to adjust height, and rotate the armrest inward or outward by twisting.

Is this chair suitable for tall people?

The recommended user height is 160 to 190 cm. The backrest is about 75 cm high, providing good support for most users.

What tools are needed for assembly?

All necessary tools, including an Allen key and bolts, are provided in the box. No additional tools are required.

How do I tighten loose screws or parts?

Use the provided Allen key to tighten any loose bolts. Check all connections under the seat, armrests, and backrest periodically. Do not overtighten.

USER MANUAL XS400PROG KeepOut

USER GUIDE
GAMING CHAIR
[e-mail]

Cleaning:
If there are stains on the surfaces of the chair, apply some polish on a soft towel and rub the stains until they dissolve.
Note: Do not apply the polish directly on the chair.