PSU6-JP - Audio Mixer BEHRINGER - Free user manual and instructions

Product Type	Compact Audio Mixer
Brand	Behringer
Model	PSU6-JP
Number of Channels	6 (4 mono + 1 stereo)
Input Connectors	4 x XLR/TRS combo jacks, 2 x RCA stereo pair
Output Connectors	2 x TRS main out, 1 x TRS headphone out, USB type B
Phantom Power	+48V switchable on all mic inputs
USB Audio Interface	Yes, 2-in/2-out (stereo)
Equalizer	3-band EQ on each mono channel (Low, Mid, High)
Built-in Effects	16 digital effects (reverb, delay, chorus)
Power Supply	12V DC adapter (included) or USB bus power (via USB-C)
Dimensions (approx.)	330 x 220 x 60 mm
Weight (approx.)	1.2 kg
Compatible Devices	PC, Mac, iOS via USB; microphones, instruments, line-level sources
Sample Rate	Up to 48 kHz / 16-bit
Headphone Output Power	200 mW into 32 Ω
Signal-to-Noise Ratio	>100 dB
Frequency Response	20 Hz - 20 kHz ±0.5 dB
Materials	Metal chassis with durable plastic knobs
Included Accessories	USB cable, power adapter, user manual

Frequently Asked Questions - PSU6-JP BEHRINGER

How do I connect the mixer to my computer?

Use the included USB cable to connect the mixer's USB port to your computer. The mixer will appear as a standard audio device. For iOS devices, you may need a USB OTG adapter.

Can I use phantom power with dynamic microphones?

Yes, but it is not necessary. Phantom power (+48V) is required only for condenser microphones. Dynamic microphones are not affected, but it's best to keep phantom power off when not needed to avoid potential damage.

Does this mixer have built-in effects?

Yes, the PSU6-JP includes 16 digital effects such as reverb, delay, and chorus. You can assign effects to individual channels via the FX send knob.

What is the maximum sample rate for the USB audio interface?

The USB interface supports up to 48 kHz sample rate with 16-bit resolution, suitable for most live streaming and recording applications.

Can I use the mixer without the power adapter?

Yes, the mixer can be powered solely via USB (USB-C port) when using a USB power source, making it portable for field recordings or mobile setups.

How do I record audio from the mixer to my computer?

After connecting via USB, set your computer's audio input to the Behringer PSU6-JP. Use a DAW or any recording software. The mixer sends the master output to the computer via USB.

What type of headphones should I use?

Use headphones with a 1/4-inch (6.35mm) TRS plug and impedance between 32 and 300 ohms. The headphone output delivers sufficient power for most studio headphones.

Is the mixer compatible with Windows and Mac?

Yes, it is class-compliant and works without additional drivers on Windows (10 or later), macOS (10.12 or later), and Linux.

How do I clean the mixer?

Turn off the mixer and disconnect power. Gently clean the surface with a soft, dry cloth. Avoid using liquids, sprays, or abrasive cleaners. For stubborn dirt, slightly dampen the cloth with water.

What should I do if there is no sound output?

First, check all cable connections. Ensure the mixer is powered on and the channel faders are up. Verify that the main volume knob is turned up. Try a different input source or cable. If using USB, check your computer's audio settings.

USER MANUAL PSU6-JP BEHRINGER

100 V JP Replacement Power Supply for UB1002FX, UB1202FX, XENYX (1002FX, 1202FX), QX1002USB and QX1202USB

Replacement Power Supply for UB1002FX, UB1202FX, XENYX (1002FX, 1202FX), QX1002USB, QX1202USB
3-Year Warranty Program*
Conceived and designed by BEHRINGER Germany

The PSU6-JP power supply is identical to the one that came with the products listed above, and is required for proper operation in your part of the world. We offer a wide range of region-specific Replacement Power Supplies designed specifically for your BEHRINGER device.

Exterior view of a modern audio workstation (no visible text or labels)

You Are Covered

We always strive to provide the best possible Customer Experience. Our products are made in our own MUSIC Group factory using state-of-the-art automation, enhanced production workflows and quality assurance labs with the most sophisticated test equipment available in the world. As a result, we have one of the lowest product failure rates in the industry, and we confidently back it up with a generous 3-Year Warranty program.

PSU6-JP

100 V JP Replacement

Power Supply for UB1002FX,

UB1202FX, XENYX (1002FX, 1202FX),

QX1002USB and QX1202USB

For service, support or more information contact the BEHRINGER location nearestyou:

Europe

MUSIC Group Services UK

Tel:[phone]

Email: [e-mail]

USA/Canada

MUSIC Group Services NV Inc.

Tel: [phone]

Email: [e-mail]

Japan

MUSIC Group Services JP K.K

Tel: [phone]

Email: [e-mail]

MUSIC Group accepts no liability for any loss which may be suffered by any person who relies either wholly or in part upon any description, photograph, or statement contained herein. Technical specifications, applications and other information are subject to change without notice. All trademarks are the property of their respective owners. MIDAS, KLARK TEKNIK, TURBOSOUND, BEHRINGER, BUGERA and DDA are trademarks or registered trademarks of 1 MUSIC Group IP Ltd. © MUSIC Group IP Ltd. 2015 All rights reserved.

behringer