AV631NG - Headphones Avenzo - Free user manual and instructions

Product Type	Wireless Bluetooth Earbuds
Brand	Avenzo
Model	AV631NG
Color	Black and Red
Bluetooth Version	5.0
Wireless Range	Up to 10 meters
Battery Life	Up to 5 hours playtime
Charging Time	Approximately 1.5 hours
Charging Port	Micro USB
Driver Size	10mm
Frequency Response	20Hz - 20kHz
Impedance	32Ω
Sensitivity	100dB
Weight (per earbud)	Approximately 10g
Water Resistance	IPX4 (sweat resistant)
Controls	Volume, play/pause, track skip, answer call
Microphone	Built-in, for calls
Noise Isolation	Passive
Included Accessories	Charging case, USB charging cable, ear tips (S/M/L)
Maintenance	Wipe with a soft, dry cloth
Safety	Keep away from water, do not disassemble
Spare Parts	Replacement ear tips available
Repairability	Battery and internal components not user-serviceable

Frequently Asked Questions - AV631NG Avenzo

How do I pair the earbuds with my phone?

Ensure the earbuds are charged. Remove them from the charging case; they will automatically enter pairing mode with blinking lights. On your phone, enable Bluetooth and select 'AV631NG'. If prompted, enter PIN 0000. Once connected, the lights will stop blinking.

How do I charge the earbuds?

Place the earbuds into the charging case. Connect the case to a power source using the included Micro USB cable. The case LED will indicate charging status. Fully charge the case and earbuds for optimal battery life.

What is the battery life of the AV631NG?

The earbuds provide up to 5 hours of music playback on a full charge. The charging case can recharge them multiple times, extending total usage time to approximately 15-20 hours.

Can I use just one earbud at a time?

Yes, each earbud works independently. Use either the left or right earbud for mono sound. Simply take one out of the case and pair it with your device.

How do I reset the earbuds?

If you experience connection issues, reset the earbuds by placing them in the charging case and closing the lid. Wait 10 seconds, then remove them again. To factory reset, press and hold the multi-function button on both earbuds for 10 seconds until the lights flash red and white.

What should I do if the earbuds are not charging?

Check that the charging contacts on the earbuds and inside the case are clean and free of debris. Ensure the USB cable is properly connected to a power source. Try using a different cable or adapter. If issue persists, contact support.

Are the earbuds compatible with all smartphones?

Yes, the AV631NG are compatible with any Bluetooth-enabled device, including Android and iOS smartphones, tablets, and computers.

How do I clean the earbuds?

Wipe the earbuds and case with a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water. Do not use abrasive cleaners or immerse in water. Clean the ear tips separately with mild soap and water, and let them dry completely before reattaching.

Are the earbuds waterproof?

The earbuds have an IPX4 rating, meaning they are resistant to sweat and light rain. However, they are not suitable for submersion in water or intense water exposure.

How do I control music and calls?

Use the multi-function button on each earbud: press once to play/pause or answer/end a call. Press twice to skip to the next track. Press three times to go back to the previous track. Volume can be adjusted via your connected device.

USER MANUAL AV631NG Avenzo

Black and red Bluetooth earbuds with black leads, coiled in a white frame (no text or symbols visible)

Manual de usuario

AV631

Auriculares Bluetooth

Estimado cliente: