LED SoundCube - Loudspeaker EASYPIX - Free user manual and instructions

Product Type	Portable Bluetooth Speaker with LED Lighting
Brand	Easypix
Model	LED SoundCube
Dimensions (approx.)	10 x 10 x 10 cm (3.9 x 3.9 x 3.9 inches)
Weight (approx.)	300 g (10.6 oz)
Power Source	Built-in rechargeable battery via USB-C (5V, 500mA)
Battery Life (approx.)	Up to 6 hours at moderate volume
Charging Time (approx.)	2-3 hours
Connectivity	Bluetooth 5.0, 3.5 mm AUX input
Speaker Configuration	Single full-range driver, passive radiator
Output Power	5W RMS
Frequency Response	80 Hz – 20 kHz
LED Lighting	Multicolor RGB LED light show with multiple modes
Controls	Power, volume +/-, play/pause, LED mode button
Care and Cleaning	Wipe with a soft, dry cloth. Do not use liquids or abrasive cleaners.
Safety Warnings	Keep away from water and heat sources. Use only supplied charger.
Spare Parts and Repairability	No user-serviceable parts. Contact Easypix support for repairs.
General Information	Ideal for indoor use. Compatible with smartphones, tablets, laptops.

Frequently Asked Questions - LED SoundCube EASYPIX

How do I pair my phone with the LED SoundCube?

Turn on the speaker, press the Bluetooth button (or it may auto-enter pairing mode). On your phone, enable Bluetooth and select Easypix SoundCube from the list. If prompted, enter PIN 0000.

Can I use the speaker while it's charging?

Yes, the speaker can be used while plugged into a USB power source. However, charging may take longer if used at high volume.

How do I change the LED light mode?

Press the dedicated LED mode button to cycle through different lighting effects such as steady, pulsing, color cycling, or beat-reactive. Press and hold to turn off the lights.

What is the range of the Bluetooth connection?

The Bluetooth 5.0 provides a stable connection up to approximately 10 meters (33 feet) in open space. Walls and obstacles may reduce the range.

How do I clean the speaker?

Turn off and unplug the speaker. Wipe the exterior with a soft, dry cloth. For stubborn dirt, lightly dampen the cloth with water. Never use harsh chemicals or submerge the speaker.

What does the LED indicator mean?

A solid blue light indicates Bluetooth is connected. Flashing blue means pairing mode. Red light may indicate low battery or charging. Refer to the manual for specific patterns.

Can I connect two speakers together?

This model does not support TWS (True Wireless Stereo) pairing. You can only connect one speaker at a time to your device.

How long does the battery last?

The built-in battery lasts up to 6 hours at moderate volume. LED lights on will decrease battery life. Charging takes about 2-3 hours via USB-C.

What should I do if the speaker won't turn on?

First, charge the speaker for at least 30 minutes. If it still doesn't turn on, try a different USB cable and power adapter. If the issue persists, contact Easypix support.

Is the speaker waterproof?

No, the LED SoundCube is not waterproof. Keep it away from liquids and moisture. It is designed for indoor use only.

USER MANUAL LED SoundCube EASYPIX

3a transmission HFP, HSP, AZDP y AVRCP. Contour el Manual e using a in-operational system to disseptive/unlethal em

UPPOSTYLE ELECTRONICS