3EFG394NP - Cooker BALAY - Free user manual and instructions

Product Type	Freestanding Cooker
Brand	Balay
Model	3EFG394NP
Fuel Type	Gas hob with electric oven
Number of Gas Burners	4
Oven Type	Electric fan oven (multifunction)
Oven Capacity	70 L
Grill Function	Yes
Energy Efficiency Class (Oven)	A
Width	60 cm
Height	85 cm (adjustable)
Depth	60 cm
Weight	55 kg
Gas Type	Natural gas / LPG (convertible)
Safety Features	Flame failure device on burners, cool touch door
Cleaning	Catalytic liners on oven back and side panels
Spare Parts	Available via Balay service network
Warranty	2 years
Power Supply	230 V / 50 Hz
Color	White
Control Type	Knobs for hob, thermostat for oven

Frequently Asked Questions - 3EFG394NP BALAY

How do I convert the cooker from natural gas to LPG?

To convert, you need to replace the injectors on each burner and adjust the air shutter. Refer to the conversion kit instructions. Always have a qualified technician perform the conversion.

What should I do if the oven is not heating up?

First, check that the power cord is properly plugged in and the circuit breaker is on. If still not heating, the heating element or thermostat may be faulty. Contact Balay service for repair.

How do I clean the glass oven door?

Use a mild glass cleaner or a solution of vinegar and water. Avoid abrasive pads which can scratch the glass. For stubborn stains, use a non-scratch sponge.

The hob burners are not lighting consistently. What can I do?

Ensure the burner caps are clean and properly seated. Check the spark plugs for debris. If the issue persists, the ignition module may need replacement.

What type of cookware is recommended for the gas hob?

Use flat-bottomed cookware that matches the burner size. Avoid pots that are too small or too large, as they can cause unstable flames and inefficient cooking.

Why is my oven cooking unevenly?

Uneven cooking may be due to overcrowding or incorrect shelf position. Use the fan oven mode and place dishes in the center. Also check that the oven fan is working.

How do I set the timer on the oven?

Turn the timer knob (or press buttons on digital models) to the desired time. The timer will ring when time elapses. For cooking programs, refer to the user manual.

Can I use aluminium foil in the oven?

Yes, but only on baking trays or to cover dishes. Never cover the oven bottom or heating elements as it can cause overheating and damage.

The oven door seems loose. How do I adjust it?

Check the door hinges for screws that may need tightening. If the hinges are worn, they may need replacement. Contact Balay service for assistance.

Where can I find the serial number of my cooker?

The serial number is on the rating plate, usually located behind the oven door (on the lower frame) or on the back panel. It is needed for warranty claims and spare parts.

USER MANUAL 3EFG394NP BALAY

Simple line drawing of a container with a handle and curved base (no text or symbols)

Isometric line drawing of a kitchen setup with a stove, oven, and door (no text or symbols)

7

Technical line drawing of a mechanical component with no visible text or symbols

8

Technical line drawing of a mechanical device with no visible text or symbols

Diagram showing a connector with a plug and a circular component connected to a cylindrical pin (no text or symbols)

Diagram of two electrical connector blocks with circular holes, no text or symbols present

9

Technical diagram of a mechanical assembly with no visible text or symbols

Technical line drawing of a mechanical assembly with no visible text or symbols

10

Technical line drawing of a mechanical component with a flanged circular part and a curved housing (no text or symbols)

Technical line drawing of a mechanical assembly with two circular components and internal components (no text or symbols)

11

Technical line drawing of a mechanical assembly with screws and spring components (no text or symbols)

Technical line drawing of a mechanical component with a screw and threaded detail (no text or symbols)

Diagram showing a screw and its cross-section with light rays, no text or symbols present

12

Cross-sectional diagram of a mechanical device with layered components and an upward arrow indicating motion (no text or symbols)

12a

Exploded view diagram of a mechanical assembly showing internal components (no text or labels)

13

Diagram showing a kitchen oven with gas stove and heating unit, alongside three views of the oven interior (no text or labels)

14

graph TD
    A["Initial Component"] --> B["Assembly Step 1"]
    B --> C["Assembly Step 2"]
    C --> D["Assembly Step 3"]
    D --> E["Final Assembly"]
    style A fill:#f9f,stroke:#333
    style B fill:#ccf,stroke:#333
    style C fill:#cfc,stroke:#333
    style D fill:#fcc,stroke:#333
    style E fill:#ffc,stroke:#333

15

Close-up of a mechanical component with visible gears and tools, no text or symbols present.

es

	G20/20	G30/29	G31/37
G20/20		A	A
G30/29B		D
G31/37B	D