LK320AS - Soap dispenser Elkay - Free user manual and instructions

Product Type	Soap Dispenser
Brand	Elkay
Model	LK320AS
Dimensions (Approx.)	6.5 in x 4.5 in x 5.5 in (165 mm x 114 mm x 140 mm)
Weight (Approx.)	1.2 lbs (0.54 kg)
Capacity	800 mL (27 oz)
Actuation Type	Manual Push-Button
Material	Stainless Steel Body with Plastic Internals
Finish	Satin (AS = Satin Stainless)
Mounting Type	Countertop or Wall Mount
Dispensed Product	Liquid Soap, Hand Sanitizer, or Lotion
Valve Type	Positive Seal Pump
Dispense Amount	Approx. 0.5 mL per stroke
Installation Requirements	Cutout for countertop or screw holes for wall
Maintenance	Clean exterior with mild soap and water; rinse pump periodically
Safety	Use only non-abrasive soaps; avoid bleach or harsh chemicals
Spare Parts Available	Pump assembly, valve, and mounting hardware
Warranty	1-year limited warranty
Country of Origin	USA (Elkay)
Certifications	ADA compliant (if mounted appropriately)

Frequently Asked Questions - LK320AS Elkay

How do I install the Elkay LK320AS soap dispenser on a countertop?

Drill a hole of the required diameter (typically 1-1/8 inch) in the countertop. Insert the dispenser from above, secure with the provided locking nut from below, and connect the pump mechanism. Ensure the soap tube is properly inserted into the bottle.

What type of soap can I use with this dispenser?

Use standard liquid hand soap or hand sanitizer. Avoid thick lotions or abrasive cleaners as they may clog the pump. For best performance, use soaps with a viscosity similar to water.

What is the capacity of the LK320AS dispenser?

The integrated reservoir holds approximately 800 mL (27 fl oz) of liquid soap, reducing the frequency of refills in high-traffic areas.

How do I refill the soap dispenser?

Unscrew the top cap or remove the entire pump assembly (depending on model). Pour soap into the reservoir until full, then reassemble. Avoid overfilling.

How should I clean the Elkay LK320AS?

Wipe the exterior with a soft cloth dampened with mild soap and water. For the pump, periodically flush with warm water to remove residue. Do not use abrasive scouring pads or harsh chemicals.

Can the dispenser be mounted on the wall?

Yes, the LK320AS is designed for both countertop and wall mounting. For wall mounting, use the included bracket (or purchase separately) and secure with screws into wall anchors.

How much soap is dispensed per push?

Each full stroke dispenses approximately 0.5 mL of soap. The amount may vary slightly depending on the soap viscosity and pump condition.

Is the pump replaceable?

Yes, the pump assembly is a replaceable spare part. If the pump becomes clogged or worn, you can purchase a replacement from Elkay or authorized distributors.

What does the 'AS' in LK320AS stand for?

'AS' indicates the finish: Satin Stainless Steel. This model has a brushed satin surface that resists fingerprints and matches other Elkay satin fixtures.

Does the Elkay LK320AS come with a warranty?

Elkay provides a 1-year limited warranty against defects in materials and workmanship. Keep your receipt for warranty claims.

USER MANUAL LK320AS Elkay

Line drawing of a laboratory glassware device with a conical base and handle (no text or symbols)

INCLUDES:

Line drawing of a laboratory gas washing bottle with a conical nozzle (no text or labels)

RECOMMENDED TOOLS:

Sealant Tape

Plumber's Putty

WARNING: Please carefully read and properly follow the instructions for installation found in this manual.

STEPS:

1

Diagram of a mechanical device with an upward and downward arrow indicating assembly or movement (no text or symbols present)

Remove the bottle. Separate soap dispenser head from flange body assembly.

2

Insert body assembly through selected hole in sink. Secure body to sink by screwing the mounting nut from the underside of the sink. Hand tighten only.

3

Diagram showing two mechanical components: a lever and a cylindrical component with rotation arrow (no text or symbols)

Screw bottle onto body assembly shank.

4

Technical line drawing of a mechanical device with a cylindrical component and lever (no text or symbols)

Pour in soap (not included) into the shank orifice.

5

Mechanical device with lever and base, showing a downward force arrow (no text or symbols)

Reinsert soap head into top of the flange.

WARRANTY

ELKAY LIMITED LIFETIME WARRANTY

ELKAY LIMITED LIFETIME WARRANTY

Elkay warrants that all parts and finishes of the Elkay Residential brand faucets are free from defects in materials and workmanship for the life of the product, if purchased after 1996. This warranty covers the original consumer purchaser of the product only.

If the product should leak or drip during normal use, Elkay will provide, free of charge, a replacement cartridge. For other defects in material or workmanship, Elkay will, at its option, supply replacement parts (or if no longer available a comparable product). Elkay reserves the right to examine product in question and its installation prior to replacement.

What is not covered:

1. Damage caused by accident, negligence, misuse, abuse, improper installation or operation or failure to follow care or installation instructions enclosed with your product.
2. Damage occurring during shipment of the product (claims must be presented to the carrier).
3. Normal wear and tear.
4. Labor charges, costs of removal and reinstallation, and any damages to other property.
5. All industrial, commercial and business use whose purchasers are hereby extended a limited lifetime on mechanical parts and 5 years on finish.

What you must do to obtain warranty service:

Either write to Elkay, attention Customer Care, 2222 Camden Court, Oak Brook, IL 60523 or call 1-800-223-5529. Please provide date of purchase and installation, description of nature of the defect, and model number or description of model and/or component part.

THIS LIMITED WARRANTY IS EXPRESSLY IN LIEU OF ANY OTHER WARRANTIES, EXPRESSED IMPLIED, ARISING BY LAW OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THIS LIMITED WARRANTY MAY NOT BE ALTERED, VARIED, OR EXTENDED, EXCEPT BY A WRITTEN INSTRUMENT EXECUTED BY ELKAY. THE REMEDY OF REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS LIMITED WARRANTY IS EXCLUSIVE. IN NO EVENT SHALL THE MANUFACTURER BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES TO ANY PERSON, WHETHER OR NOT OCCASIONED BY NEGLIGENCE OF ELKAY, INCLUDING WITHOUT LIMITATION DAMAGES FOR LOSS OF USE, COSTS PROPERTY DAMAGE OR OTHER MONETARY LOSS.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply. This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

This warranty covers product installed in the United States and Canada.

CARE AND CLEANING INSTRUCTIONS

Congratulations on your purchase of an Elkay product. Although your product is extremely durable, attention should be given to the care, cleaning and maintenance of this product. Cleaning agents and abrasives may cause damage, which may result in oxidation and discoloration.

By following these simple guidelines for proper care and cleaning, it will give you years of enjoyment:

TO CLEAN: Simply wipe gently with a damp cloth and blot dry with a soft towel. A common rule of thumb is: when you dry off, dry off your product.

• Avoid build-up of soap, toothpaste or mineral deposits, as these tend to have an adverse effect on the appearance of the product.
• NEVER use cleaning products of any kind on this product - especially those containing ammonia, bleach or alcohol - or those with any form of abrasive.

FOR CARE AND MAINTENANCE:

• The water in certain areas of the world can be very caustic - standing water around the product can cause damage. Be sure to remove standing water with a dry, soft cloth as soon as possible.
• For polished brass finishes, as often as once a week, you can apply a paste wax or special, non-abrasive, brass coating (DO NOT APPLY POLISH).
• Before applying a protective coating, gently brush the entire fixture using a soft tooth brush. This will remove any dirt or deposit build-up.
• These simple steps will add temporary protective coating to your faucet and extend the life of the finish.

Failure to follow care and cleaning will void your warranty. For additional information, please visit elkayusa.com.