USB-PAR - Cables for Computers and Peripherals Steren - Free user manual and instructions

Product Type	USB to Parallel Adapter Cable
Brand	Steren
Model	USB-PAR
Connector 1	USB Type-A Male
Connector 2	DB25 Female (Parallel)
Cable Length	1.8 m (6 ft)
Weight	100 g (3.5 oz)
Power Source	Bus-powered via USB
Operating System Support	Windows, macOS, Linux
Data Transfer Rate	Up to 12 Mbps (USB 1.1)
Compatibility	Parallel printers, scanners, other parallel devices
Plug and Play	Yes
Driver Requirement	May require driver installation on some systems
LED Indicators	None
Shielding	Fully shielded to reduce interference
Jacket Material	PVC
Operating Temperature	0°C to 60°C (32°F to 140°F)
Storage Temperature	-20°C to 70°C (-4°F to 158°F)
Humidity	10% to 90% non-condensing
Maintenance	Wipe with a dry cloth; do not use liquids
Safety	Avoid sharp bends; do not expose to moisture
Spare Parts	Not applicable (cable is one unit)
Repairability	Not user-serviceable; replace if damaged
Warranty	1 year limited warranty
Package Contents	USB-PAR cable, quick start guide

Frequently Asked Questions - USB-PAR Steren

What is the Steren USB-PAR cable used for?

The Steren USB-PAR is a USB to parallel adapter cable that allows you to connect legacy parallel devices, such as printers and scanners, to a modern computer with a USB port.

Does the USB-PAR require external power?

No, the cable is bus-powered directly from the USB port, so no external power adapter is needed.

Which operating systems are supported?

The cable supports Windows, macOS, and Linux. Some systems may require a driver installation.

What is the maximum cable length?

The cable length is approximately 1.8 meters (6 feet), which is sufficient for most desktop setups.

Can I use this cable with a parallel printer?

Yes, the connector is a DB25 female, which is standard for parallel printers. Ensure your printer is compatible.

Is the cable shielded?

Yes, the cable is fully shielded to minimize electromagnetic interference and ensure reliable data transfer.

How do I install the driver?

On Windows, the driver may install automatically. If not, download the latest driver from the Steren website. On macOS and Linux, built-in drivers often work.

What is the data transfer speed?

The cable supports USB 1.1 speeds up to 12 Mbps, which is sufficient for most parallel devices.

Can I use multiple parallel devices with one cable?

No, the cable is designed for a single parallel device. For multiple devices, use a parallel switch box.

What should I do if the cable is not recognized?

Check the USB connection, try a different port, and ensure the driver is installed. If the device still isn't recognized, contact Steren support.

USER MANUAL USB-PAR Steren

Close-up of a black USB cable connector with 24-pin connector (no text or symbols visible)

1117A

36 pin 1.8 m USB to Centronics adapter

V1.0

Instruction manual

USB-PAR

Close-up of a black USB connector with 25-pin connector (no text or symbols visible)

1117A

Before using the product, read the following instructions to avoid any malfunction.

• This device is not intended for use by people (including children), whose physical, sensory or mental abilities are different or reduced, or who lack experience or knowledge.
• Children should be supervised to ensure they do not use the device as a toy.
• Do not expose the product to extreme temperatures.
• Do not use or store it in places where there are leaks or splashes of water. It can cause a malfunction.
• To disconnect the equipment, pull on the connector and remove it from the port; never pull the cable.

SYSTEM REQUIREMENTS FREQUENT QUESTIONS

• CPU with a speed of 100 MHz or higher
• 1 available USB port
• Windows 98, ME, 2000, XP, seven, 10.

INSTALLATION IN WINDOWS 10

1. Connect the USB terminal to an available port on the computer.
2. Insert the parallel connector into the computer you want to use (for example, a printer). The computer will automatically detect the computer and automatically install the necessary drivers.

graph LR
    A["Laptop"] <--> B["USB cable"]
    B --> C["Printer"]

In some cases, it is necessary to select the port, go to the "Frequently asked questions" section of this manual to know how to perform this operation.

QUESTION ANSWER

How can I know if the drivers Have they been installed correctly?

Why can not I print, even though the controllers Are they installed?

According to the operating system used, go to the Device Manager option.

A device whose name is to appear must appear Compatibility with USB printers.

This USB adapter does NOT communicate through the LPT1 port. The moment you install the printer, the installation wizard will request that you select the port of the printer; You must try each one of those that appear with the name USB00 (Virtual printer port for USB).

SPECIFICATIONS

Input: 5V = 100 mA

www.steren.com