BLF10AS - Dishwasher Brastemp - Free user manual and instructions
Find the device manual for free BLF10AS Brastemp in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Dishwasher |
| Brand | Brastemp |
| Model | BLF10AS |
| Installation type | Built-in |
| Dimensions (W x H x D) | 598 x 845 x 610 mm |
| Weight | 48 kg |
| Power supply | 220-240 V, 50 Hz, 10 A |
| Energy consumption per cycle | 0.92 kWh |
| Water consumption per cycle | 9.5 L |
| Noise level | 44 dB(A) |
| Number of place settings | 10 |
| Programs | Normal, Quick, Intensive, Economy |
| Drying system | Condensation drying |
| Safety features | Child lock, overflow protection |
| Maintenance | Clean filter monthly, descale every 3 months |
| Spare parts availability | Authorized service centers |
Frequently Asked Questions - BLF10AS Brastemp
How do I install the dishwasher?
Ensure the dishwasher is placed on a flat, stable surface. Connect the water inlet hose to a cold water supply, attach the drain hose to a sink drain, and plug the power cord into a grounded outlet. Level the appliance by adjusting the feet. Refer to the installation guide for detailed steps.
How to use salt and rinse aid?
Fill the salt reservoir with dishwasher salt until full, then add water. Adjust the salt setting based on water hardness (see manual). For rinse aid, fill the dispenser until the indicator is clear. Use a funnel to avoid spillage.
What do error codes like E1, E2 mean?
Error codes indicate specific faults. For example, E1 usually means water supply issue, check the inlet hose and water tap. E2 indicates drainage problem, clean the filter and drain hose. Refer to the manual for a full list.
How to clean the filter?
Remove the lower rack and turn the coarse filter counterclockwise to remove it. Rinse under running water and scrub with a soft brush. Reassemble in reverse order. Clean monthly to maintain performance.
Why is the dishwasher not starting?
Check that the door is fully closed and latched. Ensure the water tap is open and the power cord is plugged in. Also verify that the delay start option is not set. If the issue persists, try resetting by unplugging for 1 minute.
How to load dishes properly?
Place plates and bowls facing downward on the lower rack, glasses and cups on the upper rack. Ensure items do not block spray arms. Avoid overloading and place larger items at the sides and back.
How to descale the dishwasher?
Use a commercial dishwasher descaler or a mixture of vinegar and baking soda. Run an empty Intensive cycle with descaler in the detergent compartment. Repeat every 3 months in hard water areas.
What detergent should I use?
Use dishwasher detergent in powder, gel, or tablet form. For best results, use a rinse aid and salt. Avoid regular dish soap as it will cause excessive suds and damage the appliance.
How to fix water leakage?
Check the door seal for debris or damage. Ensure the dishwasher is level. Verify all hose connections are tight and the drain hose is not clogged. If leaking from the bottom, inspect the sump area for cracks.
How to replace the door seal?
Remove the old seal by pulling it out of the groove. Clean the groove with a damp cloth. Install the new seal by pressing it firmly into the groove, making sure no gaps are visible. Test with a paper check.
User questions about BLF10AS Brastemp
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual BLF10AS - Brastemp and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BLF10AS by Brastemp.
USER MANUAL BLF10AS Brastemp
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Brastemp
Model : BLF10AS
Category : Dishwasher