C8C12 - Accessoire pour boîtier électronique Hoffman - Free user manual and instructions
Find the device manual for free C8C12 Hoffman in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electrical Enclosure |
| Model | C8C12 |
| Brand | Hoffman |
| Dimensions (H x W x D) | 8 in x 6 in x 4 in |
| Weight | 2 lb |
| Material | Steel with gray polyester powder finish |
| IP Rating | IP66 (dust-tight and protected against powerful water jets) |
| NEMA Rating | 4, 4X, 12, 13 |
| Mounting Type | Wall mount |
| Cover Type | Hinged, screw-clamp |
| Gasket | Foam-in-place, removable |
| Max Operating Temperature | 0°C to 60°C |
| Color | Gray (RAL 7035) |
| Installation | Four mounting holes, keyhole slots |
| Accessories | Back panel, mounting brackets (sold separately) |
| Maintenance | Clean with mild soap and water; inspect gasket periodically |
| Safety | Complies with UL 508A, CSA C22.2 No. 14 |
| Spare Parts | Replaceable gasket (Hoffman part number: AG-6-4-8) |
| Repairability | Fully serviceable; cover, gasket, and latch replaceable |
Frequently Asked Questions - C8C12 Hoffman
What is the C8C12 enclosure used for?
The Hoffman C8C12 is a small electrical enclosure designed to house and protect electrical components like terminal blocks, relays, or controllers in indoor or outdoor environments.
What is the IP rating of the C8C12?
It has an IP66 rating, meaning it is completely dust-tight and protected against powerful water jets, making it suitable for harsh environments.
What materials is the C8C12 made of?
The enclosure is made of steel with a gray polyester powder finish for corrosion resistance.
What are the dimensions of the C8C12?
External dimensions are 8 inches high, 6 inches wide, and 4 inches deep.
Can the C8C12 be mounted outdoors?
Yes, due to its IP66 and NEMA 4/4X ratings, it can be mounted outdoors and withstand rain, snow, and direct hose-down.
Is the gasket replaceable?
Yes, the foam gasket is removable and replaceable. Order part AG-6-4-8 from Hoffman.
Does the enclosure come with a back panel?
No, the back panel is sold separately. Common accessory is the BP-6-4 panel.
What tools are needed for installation?
Basic tools like a screwdriver, drill for mounting holes, and wrench for conduit fittings are required.
How do I clean the enclosure?
Use a mild soap and water solution with a soft cloth. Avoid abrasive cleaners that could damage the finish.
What is the warranty for the C8C12?
Hoffman typically offers a one-year limited warranty against defects in materials and workmanship.
User questions about C8C12 Hoffman
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Accessoire pour boîtier électronique in PDF format for free! Find your manual C8C12 - Hoffman and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. C8C12 by Hoffman.
USER MANUAL C8C12 Hoffman
- Locate mounting foot stud location using the dimensions given. (when holes are not provided)
- Use center punch to mark hole centers, and drill four .5 inch (13 mm) diameter holes.
- Deburr holes.
- Insert mounting foot studs into drilled holes and turn enclosure upright.
- Press sealing washer onto mounting foot stud with the tapered cone towards the hole and add flat washer.
- Thread nut onto mounting foot stud and tighten to 200 in-lbs. Note: If holes are pre-punched, omit steps 1-3.
Hole Side
Sealing Washer Detail
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Hoffman
Model : C8C12
Category : Accessoire pour boîtier électronique