XTP FR HD 4K MM - AV Extender Extron - Free user manual and instructions

Product Type	Fiber Optic Receiver for XTP System
Dimensions (H x W x D)	1.7" x 4.4" x 6.5" (4.3 cm x 11.2 cm x 16.5 cm)
Weight	1.3 lbs (0.6 kg)
Power Supply	External 12 VDC, 1 A (included)
Video Support	4K @ 60 Hz with 4:4:4 color, HDMI 2.0, HDCP 2.2
Fiber Type	Multimode (MM) LC connector
Maximum Transmission Distance	Up to 10 km (6.2 miles) over OM3/OM4 fiber
EDID Management	Built-in EDID Minder for automatic or manual EDID handling
Signal Equalization	Automatic cable equalization for up to 100 m HDMI input cable
LED Indicators	Power, Link, Video, Signal status LEDs
Maintenance	Clean with soft, dry cloth; do not use liquids or solvents
Safety Precautions	Use only supplied power supply; avoid exposure to moisture or heat
Repairability	No user-serviceable parts; contact Extron support for repairs
Compliance	CE, FCC Class A, RoHS
Operating Temperature	32°F to 122°F (0°C to 50°C)

Frequently Asked Questions - XTP FR HD 4K MM Extron

What video formats does the XTP FR HD 4K MM support?

It supports HDMI 2.0 signals up to 4K @ 60 Hz with 4:4:4 chroma subsampling and HDCP 2.2.

How far can I transmit video using this receiver?

Using multimode fiber (OM3/OM4), the maximum distance is up to 10 km (6.2 miles).

What type of fiber connector does it use?

It uses LC duplex connectors for multimode fiber.

Does it support EDID management?

Yes, it features EDID Minder, which can automatically or manually manage EDID to ensure proper handshaking.

What do the LED indicators mean?

The LEDs show: Power (unit on), Link (fiber connection), Video (active video), and Signal (input signal detected).

Can I use a different power supply?

Only use the supplied 12 VDC, 1 A power supply. Using an incompatible power supply may damage the unit.

How do I clean the fiber connectors?

Use a lint-free cleaning swab with isopropyl alcohol, or a dedicated fiber connector cleaner. Avoid touching the end face.

What is the maximum input cable length for HDMI?

The receiver can equalize HDMI cables up to 100 m (330 ft) at 1080p or shorter for 4K.

Can I extend audio separately?

Yes, the XTP system supports embedded audio pass-through; for separate audio, use XTP audio breakout modules.

How do I perform a factory reset?

Press and hold the front panel Reset button for 5 seconds using a paperclip. The unit will reboot to default settings.

USER MANUAL XTP FR HD 4K MM Extron

XTP Fiber Optic Transmitter and Receiver

Safety Instructions

Safety Instructions • English

WARNING: This symbol, , when used on the product, is intended to alert the user of the presence of uninsulated dangerous voltage within the product's enclosure that may present a risk of electric shock.

ATTENTION: This symbol, △when used on the product, is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment.

For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the Extron Safety and Regulatory Compliance Guide, part number 68-290-01, on the Extron website, www.extron.com.

© 2017 Extron Electronics. All rights reserved.

Trademarks

All trademarks mentioned in this guide are the properties of their respective owners. The following registered Trademarks ( ^® ), registered service Marks ( ^SM ), and Trademarks ( ^TM ) are the property of RGB Systems, Inc. or Extron Electronics (see the current list of trademarks on the Terms of Use page at www.extron.com):

Registered Trademarks ^(8)

Extron, AVTrac, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Global Configurator, Global Scripter, GlobalViewer, Hideaway, Inline, IP Intercom, IP Link, Key Minder, LinkLicense, LockIt, MediaLink, MediaPort, NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, SoundField, SpeedMount, SpeedSwitch, System /NTEGRATOR, TeamWork, TouchLink, V-Lock, VersaTools, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP, and XTP Systems

Registered Service Mark ^(SM) : S3 Service Support Solutions

Trademarks ^(TM)

AAP, AFL (Accu-Rate Frame Lock), ADSP (Advanced Digital Sync Processing), Auto-Image, CableCover, CDRS (Class D Ripple Suppression), DDSP (Digital Display Sync Processing), DMI (Dynamic Motion Interpolation), Driver Configurator, DSP Configurator, DSVP (Digital Sync Validation Processing), eLink, Entwine, EQIP, Everlast, FastBite, FOX, FOXBOX, HyperLane, IP Intercom HelpDesk, MAAP, MicroDigital, Opti-Torque, ProDSP, QS-FPC (QuickSwitch Front Panel Controller), Room Agent, Scope-Trigger, ShareLink, SIS, Simple Instruction Set, Skew-Free, SpeedNav, Triple-Action Switching, True4K, Vector ^TM 4K, WebShare, XTRA, ZipCaddy, ZipClip

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause interference. This interference must be corrected at the expense of the user.

Class 1 Laser Product

Any service to this product must be carried out by Extron Electronics and its qualified service personnel.

CAUTION: Using controls, making adjustments, or performing procedures in a manner other than what is specified herein may result in hazardous radiation exposure.

NOTE: For more information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the “Extron Safety and Regulatory Compliance Guide” on the Extron website.

Conventions Used in this Guide

Notifications

The following notifications are used in this guide:

WARNING: Potential risk of severe injury or death.

CAUTION: Risk of minor personal injury.

NOTE: A note draws attention to important information.

TIP: A tip provides a suggestion to make working with the application easier.

Software Commands

Commands are written in the fonts shown here:

^AR Merge Scene,,Op1 scene 1,1 ^B 51 ^W^C
[∅1] R∅∅4∅03∅0∅04∅0∅08∅0∅06∅0 [∅2] 35 [17] [∅3] 

Esc X1 * X17 * X20 * X23 * X21 CE ← 

NOTE: For commands and examples of computer or device responses mentioned in this guide, the character "0" is used for the number zero and "0" is the capital letter "o."

Computer responses and directory paths that do not have variables are written in the font shown here:

Reply from 208.132.180.48: bytes=32 times=2ms TTL=32
C:\Program Files\Extron 

Variables are written in slanted form as shown here:

ping xxx.xxx.xxx.xxx -t
SOH R Data STX Command ETB ETX 

Selectable items, such as menu names, menu options, buttons, tabs, and field names are written in the font shown here:

From the File menu, select New. Click the OK button. 

Specifications Availability

Product specifications are available on the Extron website, www.extron.com.

Extron Glossary of Terms

A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.

Contents

Introduction.... 1

Guide Overview ...... 1

Product Descriptions .... 1

System Compatibility 2

Cable Transmission....2

Control Methods....3

Features 3

XTP Interconnection Features 3

Video Features....3

Audio Features 4

Control Features 4

General Features 4

Installation....6

Rear Panel Connectors....6

Transmitter Rear Panel Connectors......6

Receiver Rear Panel Connectors 8

Connection Details 10

HDMI Connection....10

RS-232 and IR Communication 11

Power Connection....11

Operation....13

Transmitter Front Panel Features 13

Receiver Front Panel Features 14

HDMI Audio Switch 14

EDID....14

Audio Output Overview....15

Reset Modes....16

SIS Configuration and Control....17

Host Device Connection 17

SIS Overview....17

Host and Device Communication....17

Error Responses....17

Using the Command and Response Tables for SIS Commands....18

Symbol Definitions 18

Command and Response Tables for the

Transmitter SIS Commands....19

Audio Configuration Commands....19

EDID Commands....20

Advanced Configuration Commands ...... 21

Device Commands 22

Command and Response Tables for the

Receiver SIS Commands....23

Audio Configuration Commands....23

Advanced Configuration Commands 24

Device Commands 24

Configuration Software....25

Software Installation.... 25

Software Download Center Page......25

Software Product Page......27

Software Connection 28

Software Operation.... 29

Menu Bar 29

Transmitter Configuration....32

Receiver Configuration....36

Reference Information 38

Mounting 38

Tabletop Mounting....38

Furniture Mounting.... 38

Rack Mounting 38

Firmware Download....39

Introduction

This section contains general information about this guide, the Extron XTP FT HD 4K Fiber Optic Transmitter and XTP FR HD 4K Fiber Optic Receiver. Topics in this section include:

• Guide Overview
• Product Descriptions
- Features

Guide Overview

This guide contains installation, operation, control, and reference information for the XTP FT HD 4K fiber optic transmitter and XTP FR HD 4K fiber optic receiver primarily in point-to-point applications.

NOTE: See an XTP matrix switcher user guide at www.extron.com for matrix applications.

In this guide, the terms "XTP FT HD 4K" and "transmitter" refer to the XTP FT HD 4K fiber optic transmitter. The terms "XTP FR HD 4K" and "receiver" refer to the XTP FR HD 4K fiber optic receiver.

Product Descriptions

The XTP FT HD 4K and XTP FR HD 4K send and receive video, audio, bidirectional RS-232 and IR, and Ethernet signals over a fiber optic cable. They extend digital video signals (up to 4096x2160 @ 24 Hz) with deep color support up to 700 m (2,297 feet) using a multimode OM4 fiber cable or up to 10 km (6.2 mi) with a singlemode fiber cable.

The following diagram shows the XTP FT HD 4K and XTP FR HD 4K in an XTP point-to-point application.

graph TD
    A["PC"] -->|HDMI| B["Extron XTP FT HD 4K XTP Transmitter"]
    B --> C["4K Display"]
    C -->|HDMI| D["Extron XTP FR HD 4K XTP Receiver"]
    D -->|Fiber| B

Figure 1. Typical Point-to-Point Application

The XTP FT HD 4K and XTP FR HD 4K are compatible with XTP systems, but the maximum video resolution may be limited with different XTP devices. See the table below for maximum video resolutions and refresh rates for various inputs and outputs.

Maximum Resolution and Refresh Rates for XTP Systems
		Output
		Non-4K 4K	Fiber 4K Twisted	Pair	4K PLUS
Input	Analog 1920x1200	@ 60 Hz	1920x1200 @ 60 Hz	1920x1200 @ 60 Hz	1920x1200 @ 60 Hz
	Non-4K Digital 2048x1080 @ 60 Hz		2048x1080 @ 60 Hz	2048x1080 @ 60 Hz	2048x1080 @ 60 Hz
	4K Fiber 2048x1080	@ 60 Hz	4096x2160 @ 24 Hz	4096x2160 @ 24 Hz	4096x2160 @ 24 Hz
	4K Twisted Pair 2048x1080 @ 60 Hz		4096x2160 @ 24 Hz	4096x2160 @ 30 Hz	4096x2160 @ 30 Hz
	4K PLUS 2048x1080	@ 60 Hz	4096x2160 @ 24 Hz	4096x2160 @ 30 Hz	4096x2160 @ 60 Hz

Cable Transmission

The devices are further categorized by the type of fiber optic cable, multimode (MM) or singlemode (SM), which defines the effective range of transmission:

• Multimode — Long distance, up to 700 m (2,297 feet) depending on the fiber cable
• Singlemode — Very long distance, up to 10 km (6.21 miles)

NOTES:

• The multimode and singlemode models are physically and functionally identical with the exception of the effective range of transmission.
• Different modes are not compatible with each other.
• A color-coded sticker identifies the type of SFP module: orange for multimode and yellow for singlemode.

Control Methods

To directly control either device, use one of the following methods:

• Simple Instruction Set (SIS) commands (see SIS Configuration and Control on page 17)
  • XTP System Configuration Software (see Configuration Software no page 25)

Certain features can also be controlled through an XTP matrix switcher (see the XTP matrix switcher user guide at www.extron.com).

NOTE: If the XTP FT HD 4K or XTP FR HD 4K is connected to an XTP matrix switcher, configure it through the XTP matrix switcher (se the XTP matrix switcher user guide for SIS command or the XTP System Configuration Help File for software details).

Features

The following features apply to the XTP transmitter and receiver unless stated otherwise.

XTP Interconnection Features

• Reliable cable infrastructure — Transmits or receives video, audio, bidirectional RS-232 and IR, and Ethernet over a fiber optic cable.
• Fiber optic cable compatibility — Supports maximum performance over long distances.
• Bidirectional RS-232 and IR insertion for AV control — Allows remote AV devices to be controlled without the need for additional cabling.
• Ethernet extension — Reduces independent network drops required within a system with centralized 10/100 Ethernet communication.
• Signal and link status LED indicators for XTP ports — Provides a means for validating signal flow and operation from transmitter to receiver, allowing quick identification of connectivity issues.

Video Features

• Computer and video resolutions — Supports up to 4K (4096x2160 @ 24 Hz) at 4:4:4 color sampling over one fiber cable.
• HDMI specification features — Include data rates up to 10.2 Gbps, Deep Color up to 12-bit, 3D, and HD lossless audio formats.
• HDCP compliance — Ensures display of content-protected media and interoperability with other HDCP-compliant devices.
• HDMI loop-through with selectable audio control (transmitter only) — Features an active HDMI output with support for embedded audio for connection to a local monitor.
• HDMI to DVI Interface Format Correction (receiver only) — Automatically reformats HDMI source signals for output to a connected DVI display.

Audio Features

• Multiple embedded audio formats — Supports a broad range of multi-channel audio signals, providing reliable operation with HDMI sources.
• Selectable analog stereo audio input embedding (transmitter only) — Supports balanced or unbalanced audio for extended transmission by embedding stereo audio into the signal stream. This feature enables direct connection of separate stereo audio signals from a laptop, Blu-ray Disc™ player, or other device.
• Audio input gain and attenuation adjustment (transmitter only) — Sets the level of gain or attenuation, eliminating noticeable volume differences when switching between sources.
• HDMI audio de-embedding with analog stereo and digital S/PDIF audio outputs (receiver only) — Digital HDMI audio is made available as a balanced or unbalanced analog stereo signal on captive screw connectors or a S/PDIF connector.
• Selectable HDMI audio pass-through (receiver only) — Enables or disables audio signal pass-through on the HDMI output.
  • Output volume and mute control (receiver only)

Control Features

• Front panel USB configuration port — Provides convenient access for setup, configuration, and firmware updates.
• Extron XTP System Configuration Software compatibility — Allows for easy setup and commissioning.
• Relays (receiver only) — Enables control of lighting, screen settings, and other device functions.

General Features

• XTP compatibility — Provides a flexible signal switching and distribution solution that is completely integrated, ensuring reliable routing of multiple digital and analog formats.
• EDID Minder — Automatically manages EDID communication between connected devices. It ensures that all sources power up properly and reliably outputs content for display.
• Key Minder — Authenticates and maintains continuous HDCP encryption between input and output devices to ensure quick and reliable switching in professional AV environments, while enabling simultaneous distribution of a single source signal to one or more displays.
• HDCP visual confirmation (transmitter only) — Provides a green signal when encrypted content is sent to a non-compliant display, providing immediate visual confirmation that protected content cannot be viewed on the display.
• EDID and HDCP transmission support (transmitter only) — Actively buffers DDC channels, allowing continuous communication between source and display.
• Internal color bars test pattern (transmitter only) — Helps with setup and calibration.

• User-selectable HDCP authorization (transmitter only) — Allows individual inputs to appear HDCP compliant or non-HDCP compliant to the connected source, which is beneficial if the source automatically encrypts all content when connected to an HDCP-compliant device. Protected material is not passed in non-HDCP mode.

• LED indicators — Provide visual indication for real-time feedback and monitoring of key performance parameters.

• Transmitter — Provides visual indication of signal presence, HDCP, selected audio input format, audio signal clipping, and power.
• Receiver — Provides visual indication of signal presence, HDCP, received audio input type, and power.
• Lockit HDMI cable lacing brackets — Secure HDMI cables to the HDMI connectors.
• 1" (2.5 cm) high, half rack width metal enclosure — Allows for discreet placement and concealment.
• Highly reliable, energy-efficient external universal power supply included — Provides worldwide power compatibility, with high demonstrated reliability and low power consumption for reduced operating costs.

Installation

This section contains the installation procedures and operation methods for the XTP FT HD 4K and XTP FR HD 4K. Topics in this section include:

• Rear Panel Connectors
- Connection Details

Rear Panel Connectors

Transmitter Rear Panel Connectors

A HDMI input connector (see page 6)
B HDMI loop-through connector (see page 6)
C Analog audio input connector (see page 7)
D RS-232 and IR Over XTP connector (see page 7)

E XTP output connector (see page 7)
F LAN connector (see page 7)
G Power connector and LED (see page 7)

Figure 2. XTP FT HD 4K Rear Panel Connectors

Transmitter inputs

NOTES:

• For HDMI cables, the maximum cable length is 15 feet (4.6 meters).
• Use Extron LockIt Cable Lacing Brackets to secure HDMI connectors to the device (see HDMI Connection on page 10).

A HDMI input connector — Connect a digital video source device to the HDMI input connector. It accepts HDMI, DVI (with an appropriate adapter), or dual mode DisplayPort video sources.
B HDMI loop-through connector — Connect a digital video display to the HDMI loop-through connector for a local display of the HDMI input (see HDMI Audio Switch on page 14 to select local audio output options). A display that is not HDCP-compliant displays a green screen when HDCP encrypted content is sent to it.

C Analog audio input connector (see figure 2 on the previous page)—Connect an audio source to the 5-pole captive screw connectors. Wire the connector as shown in figure 3.

Figure 3. Audio Input Wiring

Transmitter XTP interconnection

RS-232 Over XTP connector — To pass bidirectional serial or other control signals between XTP-compatible devices, connect a control device to the 5-pole captive screw connector. The connector includes only the two poles labeled "RS-232" and shares the ground pole with the IR poles.

IR Over XTP connector — To transmit and receive IR signals (up to 56 kHz), connect a control device to the 5-pole captive screw connector. This port includes the two poles labeled "IR" and shares the ground pole with the RS-232 poles.

NOTE: RS-232 and IR data can be transmitted simultaneously (see RS-232 and IR Communication on page 11 for wiring details).

E XTP output connector — Connect an XTP fiber receiver or matrix switcher to the XTP fiber output connector.

WARNING: Potential risk of severe injury. The XTP FT HD 4K outputs continuous invisible light, which may be harmful to the eyes; use with caution.

NOTE: Ensure the proper fiber optic cable is used. Typically, singlemode fiber optic cable has a yellow jacket and multimode fiber optic cable has an orange or aqua jacket.

F LAN connector — Connect a control device or device to be controlled to the pass-through LAN connector for 10/100Base-T Ethernet communication. LEDs on the connector indicate link and activity status.

Transmitter power

G Power connector and LED — Connect the external 12 V, 1.0 A power supply to the 2-pole captive screw connector. For wiring considerations, see Power Connection on page 11. The Power LED lights to indicate the device is receiving power.

XTP FT HD 4K Fiber Transmitter and XTP FR HD 4K Fiber Receiver • Installation 7

Receiver Rear Panel Connectors

A XTP input connector (see page 8)
B LAN connector (see page 8)
RS-232 and IR Over XTP connector (see page 8)
D HDMI output connector (see page 9)

E Analog audio output connector (see page 9)
F S/PDIF output connector (see page 9)
G Relay connector (see page 9)
Power connector and LED (see page 9)

Figure 4. XTP FR HD 4K Rear Panel Connectors

Receiver XTP interconnection

A XTP input connector — Connect an XTP fiber optic transmitter or matrix switcher to the XTP fiber input connector.

WARNING: Potential risk of severe injury. The XTP FR HD 4K outputs continuous invisible light, which may be harmful to the eyes; use with caution.

NOTE: Ensure the proper fiber optic cable is used. Typically, singlemode fiber optic cable has a yellow jacket and multimode fiber optic cable has an orange or aqua jacket.

B LAN connector — Connect a control device or device to be controlled to the receiver for 10/100Base-T Ethernet communication through this pass-through port. LEDs on the connector indicate link and activity status.
RS-232 Over XTP connector — To pass bidirectional serial or other control signals between XTP-compatible devices, connect a control device to the 5-pole captive screw connector. The port includes only the two poles labeled "RS-232" and shares the ground pole with the IR poles.

IR Over XTP connector — To transmit and receive IR signals (up to 56 kHz), connect a control device to the 5-pole captive screw connector. This port includes the two poles labeled "IR" and shares the ground pole with the RS-232 poles.

NOTE: RS-232 and IR data can be transmitted simultaneously (see RS-232 and IR Communication on page 11 for wiring details).

XTP FT HD 4K Fiber Transmitter and XTP FR HD 4K Fiber Receiver • Installation 8

Receiver outputs

D HDMI output connector (see figure 4 on the previous page) — Connect a display device to the female HDMI connector. It supports HDMI or DVI (with an appropriate adapter) signals.

NOTES:

• The maximum cable length is 15 feet (4.6 meters).
- Use an Extron LockIt Cable Lacing Bracket to secure the HDMI connector to the device (see HDMI Connection on page 10).

E Analog audio output connector — Connect a balanced or unbalanced, stereo or mono audio output device to the 3.5 mm, 5-pole captive screw connector for analog audio output. Wire the connector as shown in figure 5.

Balanced Audio Output

Unbalanced Audio Output

Figure 5. Audio Output Wiring

ATTENTION:

F S/PDIF output connector — Connect an audio device to the female orange RCA connector for digital S/PDIF audio output. The type of audio present on this output is dictated by the following (see Audio Output Overview on page 15 for supported audio formats on the S/PDIF output):

• The audio format selected on the source material or device.
• The source device automatically outputting an audio format through EDID.

Receiver relay

G Relay connector — Connect equipment that can be controlled via momentary or latching contact, like projector screens or lifts, to normally open relays.

ATTENTION:

Power connector and LED — Connect the external 12 V, 1.0 A power supply to the 2-pole captive screw connector. For wiring considerations, see Power Connection on page 11. The Power LED lights to indicate the device is receiving power.

Connection Details

HDMI Connection

To secure the HDMI cable to the HDMI input connector, use an Extron LockIt Cable Lacing Bracket and a tie wrap.

Figure 6. Installing the LockIt Cable Lacing Bracket

1. Plug the HDMI cable into the panel connection (see figure 6, ①).

2. Loosen the HDMI connection mounting screw from the panel (②) enough to allow the Locklt to be placed over it. The screw does not have to be removed.

3. Place the LockIt on the screw and against the HDMI connector (③), and then tighten the screw to secure the bracket.

4. Loosely place the included tie wrap around the HDMI connector and the LockIt ( ④).

5. While holding the connector securely against the cable lacing bracket, use pliers or similar tools to tighten the tie wrap, then remove any excess length (⑤).

ATTENTION:

RS-232 and IR Communication

The RS-232 and IR Over XTP connector is for pass-through transmission of serial signals, such as projector control signals, and infrared data. To pass bidirectional serial command signals between XTP-compatible devices, connect a control device to the three poles (Tx, Rx, and G) under "RS-232" of the 5-pole captive screw connector. To transmit and receive IR signals, connect a control device to the three poles (G, Tx, and Rx) under "IR." The ground (G) pole is shared.

NOTE: RS-232 and IR data can be transmitted or received simultaneously (see figure 7 for wiring considerations).

Figure 7. RS-232 and IR Over XTP Connector Wiring Configuration

ATTENTION: The length of the exposed wires in the stripping process is important.

Apply power to the transmitter or receiver locally with the provided power supply (if necessary, see figure 8 for wiring considerations).

Figure 8. Power Wiring

See the notifications on the next page for other considerations.

WARNING: The wires must be kept separate while the power supply is plugged in. Remove power before wiring.

TIP: Do not tin the stripped power supply leads. Tinned wires are not as secure in the captive screw connectors and could be pulled out.

Operation

After all transmitters, all receivers, and their connected devices are powered up, the system is fully operational. If any problems are encountered, verify that the cables are routed and connected properly. If problems persist, call the Extron S3 Sales & Technical Support Hotline. See the contact numbers on the last page of this guide for the nearest Extron office.

This section contains information about the local operation of the XTP FT HD 4K and XTP FR HD 4K as well as the operational indicators. Topics in this section include the following:

• Transmitter Front Panel Features
- Receiver Front Panel Features
• HDMI Audio Switch
• EDID
• Audio Output Overview
- Reset Modes

Transmitter Front Panel Features

Figure 9. XTP FT HD 4K Front Panel Features

Power LED indicator — Lights when power is applied to the device from the power supply. There are two Power LED indicators, one on the front panel and one on the rear panel (see figure 2, G on page 6).

B Configuration connector — Connect a host device to the female USB mini-B connector to configure the connected transmitter or update firmware.

© Input LED indicators

• Signal — Lights when an active video signal is detected from the source.

- HDMI Audio — Lights when the HDMI audio input is selected.

- HDCP — Lights when the input signal is encrypted.

- Analog Audio — Lights when the analog audio input is selected.

- Audio Signal Clip — Lights when the analog audio input signal remains above -3 dBFS. The LED remains lit for 200 milliseconds after the signal falls below -3 dBFS.

Receiver Front Panel Features

Figure 10. XTP FR HD 4K Front Panel Features

Power LED indicator — Lights when power is applied to the device from the power supply. There are two Power LED indicators, one on the front panel and one on the rear panel (see figure 4, H on page 8).
B Configuration connector — Connect a host device to the female USB mini-B connector to configure the connected receiver or update firmware.
© XTP LED indicators

• Signal — Lights when an active XTP input signal is received.
- HDCP — Lights when the input signal is encrypted.

Audio LED indicators

• HBR — Lights when the input audio signal is high bit rate audio.
- Bitstream — Lights when the input audio signal is a Dolby ^ Digital, DTS ^ , or 2-channel Dolby.
- LPCM — Lights when the input audio signal is LPCM-2Ch.
- HDMI — Lights when the HDMI audio output is enabled.
- S/PDIF — Lights when the S/PDIF audio output is enabled.
- Analog — Lights when the analog audio output is enabled.

HDMI Audio Switch

The rear panel HDMI audio switches mute or unmute the embedded audio on the related HDMI connector (see figure 2, B on page 6 or figure 4, D on page 8). On the XTP FT HD 4K, the audio switch affects the audio on the HDMI loop-thru connector. On the XTP FR HD 4K, the audio switch affects the audio on the HDMI output connector. The LED next to the switch lights when HDMI audio is enabled.

• Hold the HDMI audio switch up until the LED lights (about 1 second) to enable embedded audio on the associated HDMI connector.
• Hold the HDMI audio switch down (until the LED turns off (about 1 second) to disable embedded audio on the associated HDMI connector.

The switch returns to the middle position after it has been released so the device can continue to be controlled through SIS commands.

EDID

The XTP FT HD 4K can record and save EDID in a user memory location on the transmitter. EDID can come from the loop-through display on the transmitter or the output display on the receiver. For EDID management, use the XTP System Configuration Software (see EDID Minder on page 34).

NOTE: In matrix applications, EDID on the transmitter is assigned by the matrix switcher using the XTP System Configuration Software.

Audio Output Overview

By default, the XTP FT HD 4K prioritizes embedded digital audio over analog audio to send over the XTP communication. Use SIS commands (see SIS Configuration and Control on page 17) or the XTP System Configuration Software (see XTP System Configuration Software on page 28) to manually select the audio input.

NOTES:

• To pass analog audio without video to a display connected to the HDMI output connector on a connected receiver, the transmitter sends a black video signal to simulate one of the following video signals:
• 720p @ 50 Hz
• 720p @ 60 Hz (default)
  • 1080p @ 60 Hz
• To set the black video signal, see the Black video signal SIS commands on page 19 or Transmitter device settings on page 32.

The following table shows the audio formats available on the different audio output connectors on the receiver.

Audio Format Availability on Receiver Audio Outputs
	Audio Output
Audio Input Format HDMI S/PDIF Analog
2-channel LPCM up to 48 kHz Yes Yes Yes
Multi-channel PCM up to 7.1, 192 kHz Yes
Dolby® Digital® up to 5.1 Yes Yes
Dolby Digital EX Yes Yes
Dolby Digital Plus Yes
Dolby TrueHD Yes
Dolby AtmosTM	Yes
DTS Digital Surround up to 5.1	Yes Yes
DTS-ES Matrix 6.1	Yes Yes
DTS-ES Discrete 6.1	Yes Yes
DTS-HD	Yes
DTS-HD Master AudioTM	Yes

Reset Modes

Use the recessed Reset button (see figure 11, A) on the rear panel of the transmitter or receiver to return the device to default settings or to restore factory-shipped firmware.

XTP FR HD 4K

Figure 11. Reset Button

Rest Mode Summary
Mode Activation Result		Purpose/Notes
Factory Firmware Reset (mode 1)	Press and hold the recessedResetbutton while applying power to the device.	The device reverts to the factory default firmware for a single power cycle.	Use this reset to return the firmware to the factory version temporarily if an incompatibility issue arises with the current firmware.
	NOTE: After this reset, update the device with the latest firmware version. Do not operate the device with the firmware version that results from this mode reset.	NOTE: If this reset was performed by mistake or is no longer desired, cycle power to the device again to restore the firmware version running prior to the reset.
User Settings Reset (mode 5)	Hold down theResetbutton until the Power LED blinks three times (over approximately 9 seconds). Then, press theResetbutton again momentarily (<1 second).	The device reverts user settings to the factory default values (firmware excluded).All user configurations reset to default values including real-time adjustments.The front panel Power LED blinks four times in quick succession during the reset.	Use this reset to restart with the default configuration. This is equivalent to the ZXXX SIS command (see the transmitterReset modeSIS command on page 22 or the receiverReset modeSIS command on page 24).

SIS Configuration and Control

This section contains SIS communication details and SIS commands and responses when the host device is connected directly to an XTP FT HD 4K or XTP FR HD 4K. Topics in this section include the following:

• Host Device Connection
  • SIS Overview
  • Command and Response Table for Transmitter SIS Commands
  • Command and Response Table for Receiver SIS Commands

Host Device Connection

Use a connected computer running the Extron DataViewer utility to send and receive SIS commands and responses. To connect directly to an XTP FT HD 4K or XTP FR HD 4K, connect the computer to the front panel USB configuration connector (see figure 9, B on page 13 or figure 10, B on page 14).

SIS Overview

Host and Device Communication

SIS commands consist of one or more characters per field. No special characters are required to begin or end a command sequence. When the XTP FT HD 4K or XTP FR HD 4K determines that a command is valid, it executes the command and sends a response to the host device. All responses from the transmitter or receiver to the host device end with a carriage return and a line feed (CR/LF = ←), Which signals the end of the response character string. A string is one or more characters.

Error Responses

If the transmitter or receiver determines a command is invalid or contains invalid parameters, the it returns an error response to the host. The following error codes may apply to either device:

$$ E 0 1 = \text { Invalid input number } \quad E 1 4 = \text { Not valid for this configuration } $$

$$ E 1 \emptyset = \text { Invalid command } E 1 7 = \text { Invalid command for signal type } $$

$$ E 1 2 = \text { Invalid port number } E 2 2 = \text { Busy } $$

$$ E 1 3 = \text { Invalid parameter } $$

Using the Command and Response Tables for SIS Commands

The command and response tables for SIS commands list the commands the transmitter and receiver recognize as valid, the responses returned to the host, a description of the command function or results of executing the command, and some examples of commands in ASCII.

NOTE: Uppercase and lowercase text are interchangeable unless otherwise stated.

The transmitter and receiver have different commands and responses. See the following tables for commands and responses specific to the device.

• For transmitter commands and responses, see Command and Response Tables for Transmitter SIS Commands on the next page.
• For receiver commands and responses, see Command and Response Tables for Receiver SIS Commands on page 23.

Symbol Definitions

The table below shows the hexadecimal equivalent of ASCII characters used in the command and response tables. Hexadecimal values contain two digits. The following symbols are commonly used throughout the command and response tables.

ASCII and Hexadecimal Conversion Table

Second Hexadecimal Digit

0 1

2 3

4 5

6

7 8

9

A B

C D

E F

First Hexadecimal Digit

0

LF

←

1

Esc

2

●

!

“

#

$

% &

‘

( )

*

+ ,

- .

/

3

∅ 1

2 3

4 5

6

7

8

9

: ;

< =

> ?

4

@ A

B C

D E

F G

H I

J K

L M

N O

5

P Q R S

T U

V W

X Y

Z [

\ ]

^ _

6

` a b c d e

f g

h i

j k

l m

n o

7

p q r s

t u

v w

z y

z {

| }

~

← = Carriage return and line feed (LF)
← = Carriage return with no line feed
I = Pipe (can be used interchangeably with the character).
- = Space

Esc = Escape key

W = Can be used interchangeably with the Esc character.

Command and Response Tables for the Transmitter SIS Commands

The following commands are for direct connection to the XTP FT HD 4K (see the XTP matrix switcher user guide for commands sent from the matrix switcher to the transmitter).

Command ASCII Command (Host to Device)		ASCII Response (Device to Host)	Additional Description
Audio Configuration Commands
Input audio format selection
Set input audio format	EscI X1 AFMT←Afmt I X1←		Set which audio input signal the transmitter sends. Auto prioritizes digital audio over analog audio.
View input audio format	EscIAFMT←Afmt I X1←
Audio gain and attenuation
NOTE: Gain and attenuation commands are case-sensitive. Audio level commands are not case-sensitive.
Set audio gain	X2G Aud+X2←		Set the audio gain in dB above zero.
Set audio attenuation	X3g Aud- X3←		Set the audio attenuation in dB below zero.
Increase audio level	+G or +g	Aud X4←	Increase the audio level by 1 dB.
Decrease audio level	-G or -g	Aud X4←	Decrease the audio level by 1 dB.
View audio level	G or g	Aud X4←
Black video signal
NOTE: The transmitter uses a black signal to simulate a 720p or 1080p, 50 Hz or 60 Hz signal to pass audio without video.
Enable black video signal	EscB1AFMT←Afmt B1←		Enable the black video signal for audio only.
Disable black video signal	EscB0AFMT←Afmt B0←		Disable the black video signal.
View black signal status	EscBAFMT←Afmt B X5←
Black video signal resolution and refresh rate
Set black video signal resolution and refresh rate	EscA X6 AFMT←Afmt A X6←		Set the resolution and refresh rate for an enabled black video signal.
View black video signal resolution and refresh rate	EscAAFMT←Afmt A X6←

NOTES:

X1 = Input audio format	∅ = auto (default)
	1 = digital embedded
	2 = analog
X2 = Audio gain	∅ to 24 in 1 dB steps (∅ = default)
X3 = Audio attenuation	∅ to 18 in 1 dB steps (∅ = default)
X4 = Audio level	-18 to 24 in 1 dB steps (∅ = default)
X5 = Black video signal	∅ = disable black video signal
	1 = enable black video signal (default)
X6 = Black video signal resolution	2 = 720p @ 50 Hz
	4 = 720p @ 60 Hz (default)
	6 = 1080p @ 60 Hz

Command ASCII Command	(Host to Device)	ASCII Response (Device to Host)	Additional Description
EDID Commands
Set EDID information	EscAX7EDID←EdidAX7←		Set the EDID resolution and refresh rate.
View EDID Information	EscAEDID←EdidAX7←		View the EDID resolution and refresh rate.

NOTES:

X7 = EDID emulation
See the table below

EDID Emulation Table
SIS Value	Resolution	Refresh Rate (Hz)	Output	Audio SIS	Value	Resolution	Refresh Rate (Hz)	Output	Audio
1	Receiver output				19	1280x720 50 HDMI 2Ch
2	Transmitter loop-through output				20	1280x768 50 DVI No audio
3	800x600	60 DVI	No audio		21	1280x800 50 DVI No audio
4	1024x768 60	DVI No audio			22	1280x1024	50 DVI	No audio
5	1280x720*	60 HDMI 2Ch			23	1360x768 50 DVI No audio
6	1280x768 60	DVI No audio			24	1366x768 50 DVI No audio
7	1280x800 60	DVI No audio			25	1400x1050	50 DVI	No audio
8	1280x1024	60 DVI	No audio		26	1440x900 50 DVI No audio
9	1360x768 60	DVI No audio			27	1600x1200	50 DVI	No audio
10	1366x768 60	DVI No audio			28	1680x1050	50 DVI	No audio
11	1400x1050	60 DVI	No audio		29	1920x1080	50 HDMI 2Ch
12	1440x900 60	DVI No audio			30	1920x1200	50 DVI	No audio
13	1600x1200	60 DVI	No audio		31	3840x2160	30 HDMI 2Ch
14	1680x1050	60 DVI	No audio		32	3840x2160	30 HDMI Multi-Ch
15	1920x1080	60 HDMI 2Ch			33	User assigned
16	1920x1200	60 DVI	No audio		34	User assigned
17	800x600	50 DVI	No audio		35	User assigned
18	1024x768 50	DVI No audio			36	User assigned

Command ASCII Command (Host to Device)		ASCII Response (Device to Host)	Additional Description
Advanced Configuration Commands
Video mute
Mute video to black	1B	Vmt1←	Mute the video to black.
Mute video and sync	2B	Vmt2←	Mute video and sync.
Unmute video	∅B	Vmt∅←	Unmute the video.
View video mute status	B	VmtX8←	View current video mute status.
Loop-through audio mute
Mute loop-through audio	1Z	Amt1←	Mute the loop-through audio.
Unmute loop-through audio	∅Z	Amt∅←	Unmute the loop-through audio.
View loop-through audio mute status	Z	AmtX9←	View the mute status of the loop-through audio.

HDCP Authorized device

NOTES:

• For source devices that require encryption, enable the HDCP Authorized feature. If HDCP Authorized is disabled for sources that require encryption (for example, a Blu-ray Disc™ player), the output is muted.
• For source devices that encrypt their output even if the source material does not require HDCP encryption, disable the HDCP Authorized feature to view the content on non-HDCP compliant displays.

Enable the HDCP Authorized feature

Disable the HDCP Authorized feature

View HDCP Authorized status

Test pattern

Set test pattern

View test pattern setting

NOTES:

X8 = Loop-through video mute

= unmute (default)

1 = mute video to black

2 = mute video and sync

∅ = unmute (default)

1 = Mute loop-through audio

x9 = Loop-through audio mute

∅ = Input does not report as an HDCP Authorized device

X10 = HDCP Authorized device

1 = Input reports as an HDCP Authorized device (default)

X11 = Test pattern

= disabled (default)

1 = 720p @ 50 Hz

3 = 720p @# 60 Hz

5 = 1080p @ 60 Hz

Command ASCII Command	(Host to Device)	ASCII Response (Device to Host)	Additional Description
Device CommandsReset mode
Reset user settings to factory defaults	EscZXXX←Zpx←		Reset all user settings back to factory default values. Firmware is not reset.
Information requests
View input signal presence	∅LS	FrqX12←	View the status of the presence of an input signal.
View HDCP input status	EscIHDCP←HdcpIX13←		View the HDCP status of the input.
View firmware version	Q	X.XX←	View the current firmware version.
View full firmware version	*Q	X.XX.XXXX←	View the current full firmware version.
View part number	N	XX-XXXX-XX←	View the transmitter part number.

NOTES:

12 = Video signal status	= video or TMDS signal not detected 1 = video or TMDS signal detected
13 = Input HDCP status	= no source detected 1 = HDCP-compliant source detected 2 = non-compliant source detected

Command and Response Tables for the Receiver SIS Commands

The following commands are for direct connection to the XTP FR HD 4K (see the XTP matrix switcher user guide for commands sent from the matrix switcher to the receiver).

Command ASCII Command (Host to Device)		ASCII Response (Device to Host)	Additional Description
Audio Configuration Commands
Volume control
Set output volume level	14V	Vol 14	Set the level to 14 .
Increase output volume level	+V	Vol 14	Increase the level by 1 dB.
Decrease output volume level	-V	Vol 14	Decrease the level by 1 dB.
View output volume level	V	Vol 14
Audio mute
Mute all	3Z	Amt3←	Mute the audio.
Unmute all	∅Z	Amt∅←	Unmute the audio.
View audio mute status	Z	Amt 15	View the audio mute status.

NOTES:

X14 = Output volume
∅ to 64, see the table below (64 = default)

X14	dB of Attenuation	Output Volume	X14	dB of Attenuation	Output Volume	X14	dB of Attenuation	Output Volume
∅	76 0%		22	42 37.0%		44	20 70.0%
1	63 5.5%		23	41 38.5%		45	19 71.5%
2	62 7.0%		24	40 40.0%		46	18 73.0%
3	61 8.5%		25	39 41.5%		47	17 74.5%
4	60 10.0%		26	38 43.0%		48	16 76.0%
5	59 11.5%		27	37 44.5%		49	15 77.5%
6	58 13.0%		28	36 46.0%		50	14 79.0%
7	57 14.5%		29	35 47.5%		51	13 80.5%
8	56 16.0%		30	34 49.0%		52	12 82.0%
9	55 17.5%		31	33 50.5%		53	11 83.5%
10	54 19.0%		32	32 52.0%		54	10 85.0%
11	53 20.5%		33	31 53.5%		55	9 86.5%
12	52 22.0%		34	30 55.0%		56	8 88.0%
13	51 23.5%		35	29 56.5%		57	7 89.5%
14	50 25.0%		36	28 58.0%		58	6 91.0%
15	49 26.5%		37	27 59.5%		59	5 92.5%
16	48 28.0%		38	26 61.0%		60	4 94.0%
17	47 29.5%		39	25 62.5%		61	3 95.5%
18	46 31.0%		40	24 64.0%		62	2 97.0%
19	45 32.5%		41	23 65.5%		63	1 98.5%
20	44 34.0%		42	22 67.0%		64	0 100.0%
21	43 35.5%		43	21 68.5%

Command ASCII Command	(Host to Device)	ASCII Response (Device to Host)	Additional Description
Advanced Configuration Commands
Video mute
Mute video to black	1B	Vmt1←	Mute the video. The display shows a black screen.
Mute video and sync	2B	Vmt2←	Mute video and sync.
Unmute video	∅B	Vmt∅←	Unmute the video.
View video mute status	B	VmtX16←	View the video mute status.
Relay control
Pulse relay	X17*3*X180	RlyX17*X19←	Pulse relay X17 for X18 ms.
Toggle relay	X17*20	RlyX17*X19←	Toggle relay X17.
Turn relay on	X17*10	RlyX17*1←	Turn relay X17 on.
Turn relay off	X17*∅0	RlyX17*∅←	Turn relay X17 off.
View relay status	X170 RlyX17*X19←		View the on or off status of relay X17.
Device Commands
Reset mode
Reset user settings to factory defaults	EscZXXX←Zpx←		Reset all user settings back to factory default values. Firmware is not reset.
Information requests
View input signal presence	∅LS	FrqX12←	View the video or TMDS signal status.
View HDCP output status	EscOHDCP←Hdcp0X20←		View the HDCP status of the output.
View firmware version	Q	X.XX←	View the current firmware version.
View full firmware version	*Q	X.XX.XXXX←	View the current full firmware version.
View part number	N	XX-XXXX-XX←	View the receiver part number.

NOTES:

X12 = Video signal status	∅ = video or TMDS signal not detected
	1 = video or TMDS signal detected
X16 = Video mute	∅ = unmute
	1 = mute video to black
	2 = mute video and sync
X17 = Relay number	1 = relay 1
	2 = relay 2
X18 = Pulse time	1-65,535 in 16 ms increments
X19 = Relay status	∅ = open (default)
	1 = close
X20 = HDCP status	∅, 2, 4, 6 = no sink device detected
	1, 3, 5 = sink detected with no HDCP encryption
	7 = sink detected with HDCP encryption

Configuration Software

This section contains installation and configuration procedures for the XTP System Configuration Software to configure and control the XTP FT HD 4K and XTP FR HD 4K. Either device can also be configured and controlled remotely through the XTP System Configuration Software and the XTP matrix switcher (see the XTP System Configuration Software Help file). Topics in this section include the following:

• Software Installation
• Software Connection
• Software Operation

Software Installation

The XTP System Configuration Software is compatible with most Microsoft Windows operating systems and available for download on the Extron website, www.extron.com. To download the software from the Extron website, locate it on the Download Center page or go to the XTP System Configuration Software product page.

Software Download Center Page

The software Download Center page contains available Extron software to download and install the XTP System Configuration.

Figure 12. Extron Website Download Page

To download and install the XTP System Configuration Software from this page, perform the following:

1. On the Extron website, select the Download tab (see figure 12, ① on the previous page).
2. From the left sidebar, click the Software link (see figure 12, ②).

TIP: If the XTP System Configuration Software is featured in the let sidebar, click the XTP System Configuration Software link to go directly to the product page (see Software Product Page on the next page).

Figure 13. XTP System Configuration Software Download Link

1. Click the X link (see figure 13, ①).
2. Locate the XTP System Configuration Software and click the Download link (see figure 13, ②) to the right of the product name.
3. Submit any required information to start the download. Note where the file is saved.
4. Open the saved executable (.exe) file.
5. Follow the instructions that appear on the screen to install the program.

Software Product Page

The software product page contains information about the software.

Figure 14. XTP System Configuration Software Product Page

To download and install the XTP System Configuration Software from this page, perform the following:

1. In the Search field (see figure 14, ①), type XTP System Configuration Software.
2. Press on the keyboard or select XTP System Configuration Software from the drop-down menu.
3. Click the Download button (②).
4. Submit any required information to start the download. Note where the file is saved.
5. Open the saved executable (.exe) file.
6. Follow the instructions that appear on the screen to install the program.

Software Connection

To connect the software directly to the XTP FT HD 4K and XTP FR HD 4K, connect the computer running the software to the configuration connector (see figure 9, B on page 13 or figure 10, B on page 14).

Figure 15. Connections Screen

To connect to a device:

1. Open the XTP System Configuration Software. The Connections screen opens.
2. From the Connections screen, select the USB radio button (see figure 15, ①).
3. From the displayed list, select the connected device (②).
4. Click the Connect button (③). The Device Settings screen opens (see Transmitter Configuration on page 32 or Receiver Configuration on page 36).

Software Operation

Menu Bar

The top menu bar contains three menus for configuring software settings.

File menu

The File menu contains options for disconnecting from the transmitter and exiting the program. To access the menu, click the File menu.

Figure 16. File Menu

Disconnect

This option disconnects the device from the XTP System Configuration Software.

From the File menu, select Disconnect. The Connections screen opens.

NOTE: If the device is already disconnected, the Disconnect option is disabled until a device is connected.

Exit

This option disconnects the transmitter from the software and closes the application.

From the File menu, select Exit to close the application.

Tools menu

The Tools menu contains an option for updating firmware. To access this menu, click the Tools menu.

Figure 17. Tools Menu

NOTE: The Backup and Restore and Commissioning Report options are not available when directly connected to the XTP FT HD 4K and XTP FR HD 4K. See an XTP matrix switcher user guide (www.extron.com) for more information on these features.

Update Firmware

This option uploads firmware from the host device to the connected device.

1. From the Tools menu, select Update Firmware. A dialog box opens to ask permission to disconnect from the device.

Figure 18. Confirm Disconnect Dialog Box

1. Click the Yes button to disconnect from the device and continue with the firmware update process. The Update Firmware dialog box opens.

Figure 19. Update Firmware Dialog Box

1. Click one of the following options:

2. Select file from computer — Uploads a manually selected firmware file saved on the connected computer.

3. Check network for updates — Checks the connected network for firmware updates. If any are found, click the Update X Devices button to update the firmware for the applicable connected devices or click Save File to Computer to save the firmware file to the connected computer.

4. Click the Close button after the firmware finishes updating.

Software Preference

This option resets all disabled confirmation dialogs to the default settings.

1. From the Tools menu, select Software Preference. The Software Preference dialog box opens.

Figure 20. Software Preference Dialog Box

1. Click the Reset button. The dialog box closes.

Help menu

The Help menu contains a way to access XTP System Configuration Software information, a link to the help file, and a link to the Extron website.

Figure 21. Help Menu

NOTE: The Tutorial (System Configuration) option is not available when the XTP System Configuration Software is directly connected to the device.

About the Software

This option provides basic information about the XTP System Configuration Software, including version number and copyright information.

Figure 22. About - XTP System Configuration Software Dialog Box (Example)

1. From the Help menu, select About the Software. The About dialog box opens.
2. Click the Details button for more information.
3. Click the 0k button to close the dialog box.

Help

This option opens the XTP System Configuration Software help file in a web browser.

From the Help menu, select Help.

Extron Website

This option opens the Extron website in a web browser.

From the Help menu, select Extron Website.

Transmitter Configuration

The Device Settings screen allows a user to view and edit various device settings of the transmitter connected to the host device.

Transmitter device settings

Click the Device Settings icon (see figure 23, 1) on the Global Navigation Bar to open the Device Settings screen.

Figure 23. Transmitter Device Settings Screen

Video panel

② Video input — Select the HDCP Authorized check box to set the input as an HDCP authorized device or deselect it to indicate that the device is not an HDCP authorized device. By default, the check box is selected.
③ Video output — Select the Color Bars Test Pattern check box to transmit a test pattern to an XTP receiver or XTP matrix switcher or deselect it to stop transmitting a test pattern to an XTP receiver or XTP matrix switcher. If selected, also select a signal type from the Signal Type drop-down menu.

Audio panel

4 Audio format (see figure 23 on the previous page) — Select one of the following radio buttons to determine the audio input format:

• Auto Detect — Automatically detects the input audio format. When enabled, HDMI audio has priority over analog audio.
  • HDMI — Transmits embedded audio from an HDMI signal.
• Analog — Transmits an analog audio signal.

⑤ Analog audio — If applicable, move the handle of the Analog Audio Gain slider up or down or specify the desired gain in the field below the slider to adjust the audio gain or attenuation in dB.

⑥ Audio output — Select the Enable Audio Only check box to enable a black signal for audio-only transmission to the HDMI output connector on a connected receiver. By default, the check box is selected.

If selected, also select the black signal resolution from the Signal Type drop-down menu. The default resolution is 720p @ 60 Hz.

Factory reset

⑦ Factory Reset — Click the Factory Reset button to reset the transmitter to factory settings except for firmware (see mode 5 in Reset Modes on page 16).

NOTE: This is the same as the Esc ZXXX SIS command (see Reset mode SIS command on page 22).

Device Information panel

The Device Information panel on the right side of the software screen displays device information and settings.

① Model — Displays the device model.
② Firmware Version — Displays the full firmware version.
③ Signal Present — Indicates whether an active signal is on the input.
④ HDCP — Displays the HDCP status of an active input.
⑤ EDID — Displays the current resolution and refresh rate.
⑥ Selected Audio Input — Displays the audio format of the selected input.
⑦ Audio only — Displays whether only audio is sent to outputs.
⑧ Analog Audio Gain — Displays the gain for analog audio.

XTP FT HD 4K
General Information
Model:
XTP FT HD 4K	1
Firmware Version: 1.05.0025	2
Signal Information
● Signal Present: No	3
HDCP: -	4
Current EDID Information
720p @60Hz LPCM-2Ch	5
Audio Information
Selected Audio Input: HDMI	6
Audio Only: Enabled	7
Analog Audio Gain: 0 dB	8

EDID Minder

Use the EDID Minder screen to assign unique EDID to the input or match current output EDID to the input. Click the EDID Minder button (see figure 24, 1) on the Global Navigation bar. The EDID Minder screen opens.

The EDID Minder screen displays a table of EDID options and connected output devices, which are each represented by output display icons.

• Factory default EDID options are displayed in blue.
- Connected output resolutions and devices are displayed in green.
- Custom loaded or saved EDID options are displayed in yellow.

Figure 24. EDID Minder Screen

Assign EDID to the input

1. Select an available EDID setting (represented by a blue, green, or yellow output display icon) from the Favorites, Connected Outputs, or Available EDID panel (2-4).
2. Select the check box of the connected input ( 5).
3. Click the Assign button (⑥) or the Assign to All button (⑦) below the input area.

TIP: Alternatively, EDID can be assigned by dragging and dropping the desired EDID onto the input.

Add an EDID File to the EDID Library

1. In the Available EDID panel, click the Add EDID to Library button (8). The Browse window opens.
2. Navigate to and select the desired EDID file and click Open. The EDID file appears in the Available EDID panel (4).
3. Assign the EDID file from the Available EDID panel to import the EDID to the device.

Save output EDID

1. Right-click on the desired EDID icon in the Connected Outputs panel (see figure 24, Ⓔ on the previous page).
2. Select the Save EDID to Library option. The EDID setting is saved to the connected PC. Alternatively, right-click on the desired EDID, select Copy, and then Paste the EDID into the Favorites or Available EDID panel.

Set favorite EDID

To add commonly used EDID settings to the Favorites panel for quick access, perform one of the following methods:

• Click and drag the desired EDID from the Connected Outputs or the Available EDID panel to the Favorites panel. The EDID setting is copied to the Favorites panel (see figure 24, ②).
• Right-click the desired EDID and select Copy. Then, Paste the EDID setting into the Favorites panel.

EDID filters

The filters (see figure 26) can be used to easily locate a specific EDID setting.

① Resolution filter
② Refresh Rate filter
③ Video Format filter

4 Audio Format filter
5 Clear button

Figure 25. EDID Minder Filters

To use a filter or combination of filters, perform the following:

1. Select an EDID setting from one of the drop-down lists of the associated filter (see figure 25, ①-④). The available EDID options that match the filter selection are displayed in their respective panels.
2. Repeat step 1 to apply more filters.

NOTE: To clear the currently applied filters, click the Clear button next to the filters (see figure 25, ⑤). All filters are reset.

Common timings

This function automatically displays available EDID settings that are common among multiple selected outputs.

1. Hold and click the desired outputs in the Connected Outputs panel. The Common Timings tab (located to the right of the Connected Outputs panel) appears, listing the EDID settings common among the selected outputs.
2. Select the desired common EDID. The EDID is shown in the Available EDID panel.

Receiver Configuration

The receiver Device Settings screen contains configuration options for the receiver only.

Figure 26. Receiver Device Settings Screen

Video panel

① Video mute — Click the Video Mute button to mute to black or unmute the video output.

NOTE: The button turns red when the video output is muted.

Relay Control panel

② Toggle — Click the Toggle button in the desired relay section to toggle the relay.

NOTE: The Status indicator displays Open when the relay is open and Closed when the relay is closed.

③ Pulse — Select a length of time from the Duration field in the desired relay panel and click the Pulse button to pulse the relay.

Audio panel

④ Mute All — Click the Mute All button to mute or unmute all audio outputs.

NOTE: The button turns red when the output HDMI embedded audio is muted.

⑤ Analog audio — If applicable, move the Analog Audio Volume slider up or down or select an amount in the field below the slider to adjust the audio volume in dB.

⑥ Force analog audio output — For connected DVI displays, click the Force analog audio output when DVI display is connected check box to output analog audio.

Factory reset

⑦ Factory Reset (see figure 26 on the previous page) — Click the Factory Reset button to reset the receiver to factory settings except for firmware (see mode 5 in Reset Modes on page 16).

NOTE: This is the same as the Esc ZXXX SIS command (see Reset mode on page 24.

Device Information panel

The Device Information panel on the right side of the software screen displays device information and settings.

① Model — Displays the device model.
② Firmware Version — Displays the full firmware version.
③ Signal Present — Indicates whether a signal is present on the input.
④ Video Mute — Displays the mute status of the video output.
⑤ HDMI Audio — Displays the mute status of the embedded digital audio on the HDMI output.
⑥ S/PDIF Audio — Displays the mute status of the S/PDIF output.
⑦ Analog Audio — Displays the mute status of the analog audio output.
⑧ Analog Audio Volume — Displays the analog audio output volume level.

XTP FR HD 4K
General Information
Model:
XTP FR HD 4K		1
Firmware Version:	1.05.0025	2
Signal Information
● Signal Present:	No	3
Video:	Unmuted	4
Audio Information
HDMI Audio:	Unmuted	5
S/PDIF Audio:	Unmuted	6
Analog Audio:	Unmuted	7
Analog Audio Volume:	100 %	8

Reference Information

This section contains mounting information and instructions for downloading firmware. Topics in this section include the following:

• Mounting
• Firmware Download

Mounting

The XTP FT HD 4K and XTP FR HD 4K can be placed on a tabletop or mounted in a rack or underneath a desk.

Tabletop Mounting

Attach the provided rubber feet to the bottom four corners of the enclosure.

Furniture Mounting

Go to www.extron.com for a list of available furniture mounting kits. To install either device to furniture, follow the mounting kit instructions.

Rack Mounting

Go to www.extron.com for a list of compatible rack mounting kits. To install either device in a rack, follow the mounting kit instructions and see the UL guidelines for rack-mounted devices below.

UL guidelines for rack-mounted devices

The following Underwriters Laboratories (UL) guidelines pertain to the safe installation of the XTP FT HD 4K and XTP FR HD 4K in a rack.

1. Elevated operating ambient temperature — If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient temperature, Therefore, install the XTP FT HD 4K and XTP FR HD 4K in an environment compatible with the maximum ambient temperature (Tma = +122 °F, +50 °C) specified by Extron.
2. Reduced air flow — Install the equipment in a rack so that the amount of air flow required for safe operation of the equipment is no compromised.
3. Mechanical loading — Mount the equipment in the rack so that a hazardous condition is not achieved due to uneven mechanical loading.

4. Circuit overloading — Connect the equipment to the supply circuit and consider the effect that circuit overloading might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern.

5. Reliable earthing (grounding) — Maintain reliable grounding of rack-mounted equipment. Pay particular attention to supply connections other than direct connections to the branch circuit (for example, the use of power strips).

Firmware Download

Figure 27. Downloading Firmware from the Extron Website

1. On the Extron website, www.extron.com, click the Download tab (see figure 27, ①).
2. On the left sidebar, click the Firmware link (②).
3. Navigate to the desired product ( ③).
4. Ensure the available firmware version is a later version than the current one on the device.

NOTE: The firmware release notes are a PDF file that provides details about the changes between different firmware versions. The file can be downloaded from the same page as the firmware.

1. Click the Download link (④) to the right of the desired product.
2. Submit any required information to start the download. Note where the file is saved.

Extron Warranty

Extron Electronics warrants this product against defects in materials and workmanship for a period of three years from the date of purchase. In the event of malfunction during the warranty period attributable directly to faulty workmanship and/or materials, Extron Electronics will, at its option, repair or replace said products or components, to whatever extent it shall deem necessary to restore said product to proper operating condition, provided that it is returned within the warranty period, with proof of purchase and description of malfunction to:

USA, Canada, South America, and Central America:

Extron Electronics

1230 South Lewis Street

Anaheim, CA 92805

U.S.A.

Japan:

Extron Electronics, Japan

Kyodo Building, 16 Ichibancho

Chiyoda-ku, Tokyo 102-0082

Japan

Europe and Africa:

Extron Europe

Hanzeboulevard 10

3825 PH Amersfoort

The Netherlands

China:

Extron China

686 Ronghua Road

Songjiang District

Shanghai 201611

China

Asia:

Extron Asia Pte Ltd

135 Joo Seng Road, #04-01

PM Industrial Bldg.

Singapore 368363

Singapore

Middle East:

Extron Middle East

Dubai Airport Free Zone

F13, PO Box 293666

United Arab Emirates, Dubai

This Limited Warranty does not apply if the fault has been caused by misuse, improper handling care, electrical or mechanical abuse, abnormal operating conditions, or if modifications were made to the product that were not authorized by Extron.

NOTE: If a product is defective, please call Extron and ask for an Application Engineer to receive an RA (Return Authorization) number. This will begin the repair process.

USA: 714.491.1500 or 800.633.9876

Europe: 31.33.453.4040

Asia: 65.6383.4400 Japan: 81.3.3511.7655

Units must be returned insured, with shipping charges prepaid. If not insured, you assume the risk of loss or damage during shipment. Returned units must include the serial number and a description of the problem, as well as the name of the person to contact in case there are any questions.

Extron Electronics makes no further warranties either expressed or implied with respect to the product and its quality, performance, merchantability, or fitness for any particular use. In no event will Extron Electronics be liable for direct, indirect, or consequential damages resulting from any defect in this product even if Extron Electronics has been advised of such damage.

Please note that laws vary from state to state and country to country, and that some provisions of this warranty may not apply to you.

Extron Headquarters+1.800.633.9876 (Inside USA/Canada Only)Extron USA - West Extron USA - East+1.714.491.1500 +1.919.850.1000+1.714.491.1517 FAX [phone] FAX

Extron Europe+800.3987.6673(Inside Europe Only)+31.33.453.4040+31.33.453.4050 FAX

Extron Asia+65.6383.4400+65.6383.4864 FAX

Extron Japan+81.3.3511.7656+81.3.3511.7656 FAX

Extron China+86.21.3760.1568+86.21.3760.1566 FAX

Extron Middle East+971.4.299.1800+971.4.299.1880 FAX

Extron Australia+61.8.8113.6800+61.8.8351.2511 FAX

Extron India1800.3070.3777Inside India Only+91.80.3055.3777+91.80.3055.3737 FAX