RM 4 - Touchscreen Extron - Free user manual and instructions
Find the device manual for free RM 4 Extron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack Mount Kit |
| Brand | Extron |
| Model | RM 4 |
| Compatible Device | Extron TLP Pro 1022M Touchpanel |
| Rack Size | Standard 19-inch equipment rack |
| Required Rack Space | 5U (8.75 inches) |
| Mounting Orientation | Front-facing with "TOP" marking |
| Included Rack Screws | #10-32 screws |
| Included Mounting Plate Screws | #8-32 screws |
| Included Touchpanel Screws | Pan head screws with washers |
| Material | Metal (stamped steel) |
| Installation Difficulty | Experienced installer recommended |
| Documentation | Installation guide included (refer to TLP Pro 1022M user guide for full details) |
| Package Contents | RM 4 rack mount kit, hardware pack |
| Use | Mount touchpanel in a 19-inch rack |
Frequently Asked Questions - RM 4 Extron
What devices is the Extron RM 4 compatible with?
The RM 4 is designed specifically for the Extron TLP Pro 1022M touchpanel. It is not compatible with other models without modification.
How much rack space does the RM 4 require?
The RM 4 occupies 5U of vertical space in a standard 19-inch equipment rack. Ensure your rack has at least 5U of free space.
What hardware is included with the RM 4?
The kit includes #10-32 screws for rack mounting, #8-32 screws for the mounting plate, and pan head screws with washers for the touchpanel. No additional hardware is required.
Is the installation of the RM 4 difficult?
Installation is straightforward for experienced installers. The manual provides step-by-step instructions. Basic tools like a screwdriver are needed.
Can the RM 4 be mounted in any orientation?
The RM 4 must be oriented with the ‘TOP’ marking facing up for proper touchpanel alignment. Do not mount it upside down.
Where can I find the full user guide for the touchpanel?
The full user guide for the TLP Pro 1022M touchpanel is available at www.extron.com. Search for ‘TLP Pro 1022 Series User Guide’.
What tools are required for installation?
You will need a screwdriver (likely Phillips) to tighten the provided screws. A torx or hex driver may be needed if using alternative rack screws.
Does the RM 4 include a mounting plate?
Yes, the RM 4 includes a mounting plate that attaches to the rack mount frame. The touchpanel then hooks onto this plate.
Can the RM 4 be used with touchpanels other than the TLP Pro 1022M?
The RM 4 is specifically designed for the TLP Pro 1022M form factor. Using it with other touchpanels may require custom modifications and is not supported.
What is the weight capacity of the RM 4?
Weight capacity is not explicitly stated, but the RM 4 is designed to securely hold the TLP Pro 1022M touchpanel, which weighs approximately 2-3 lbs. The metal construction ensures robust support.
User questions about RM 4 Extron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Touchscreen in PDF format for free! Find your manual RM 4 - Extron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RM 4 by Extron.
USER MANUAL RM 4 Extron
RM 4 • Installation Guide
Overview
This guide provides instructions for experienced installers to use the RM 4 to mount and install the Extron TLP Pro 1022M touchpanel in a standard 19-inch equipment rack, with 5U of vertical space. For complete instructions about connecting cables and configuring the touchpanel, see the TLP Pro 1022 Series User Guide, at www.extron.com.
Preparing and Installing the RM 4
To mount RM 4 in any standard 19-inch equipment rack, follow these instructions:
- Secure the RM 4 to the rack using the provided #10-32 screws (①). Ensure it is in the correct orientation (the front of the RM 4 has TOP stamped into the metal).
- Insert the four provided #8-32 screws into the RM 4 (②). Leave enough space for the keyhole slots of the touchpanel mounting plate to fit over the screws and slide into place.
Mounting the Touchpanel
- Attach the mounting plate to the RM 4 (③). Ensure the touchpanel mounting plate is in the correct orientation with the hooks on the mounting plate at the top and facing away from the RM 4.
- Tighten the screws (②) to secure the mounting plate to the RM 4.
- If necessary, insert the provided pan head screws and washers into the mounting screw slot on the rear of the touchpanel (see the bottom inset of figure 1, 4).
- Run cables to the rack and connect them to the rear panel of the touchpanel.
- Hold the touchpanel at a slight angle and lower the notches at the top of the back panel over the hooks of the mounting plate (5).
- Swing the bottom of the touchpanel inwards.
- Fasten the touchpanel to the mounting plate by tightening the pan head screws (6).
Figure 1. RM 4 Installation
| Extron Headquarters+1.800.633.9876 (Inside USA/Canada Only)Extron USA - West Extron USA - East+1.714.491.1500 +1.919.850.1000+1.714.491.1517 FAX +1.919.850.1001 FAX | Extron Europe+800.3987.6673(Inside Europe Only)+31.33.453.4040+31.33.453.4050 FAX | Extron Asia+65.6383.4400+65.6383.4664 FAX | Extron Japan+81.3.3511.7655+81.3.3511.7656 FAX | Extron China+86.21.3760.1568+86.21.3760.1566 FAX | Extron Middle East+971.4.299.1800+971.4.299.1880 FAX | Extron Australia+61.8.8113.6800+61.8.8351.2511 FAX | Extron India1800.3070.3777(Inside India Only)+91.80.3055.3777+91.80.3055.3737 FAX |
Table of contents
Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Extron
Model : RM 4
Category : Touchscreen