51650C ink cartridge - Ink cartridge HP - Free user manual and instructions

Product Type	Ink Cartridge
Brand	HP
Model	51650C
Ink Color	Black
Page Yield	Approximately 400 pages (based on 5% coverage)
Compatible Printers	HP DeskJet 600, 800, 900 series; HP OfficeJet 500, 600 series
Cartridge Technology	Thermal Inkjet
Dimensions (W x D x H)	Approximately 4.7 x 1.2 x 2.4 inches (120 x 30 x 60 mm)
Weight	Approximately 2.8 oz (80 g)
Storage Temperature	15-35°C (59-95°F)
Operating Humidity	20-80% RH (non-condensing)
Installation	Insert cartridge into print head carriage until it clicks. Run alignment from printer software.
Maintenance	If print quality declines, run printer's cleaning cycle manually (usually in software or front panel).
Shelf Life	Up to 2 years when stored unopened in a cool, dry place
Waste Disposal	Recycle through HP Planet Partners or local electronics recycling program
Safety	Keep out of reach of children. Avoid contact with eyes and skin. If ink spills, wash with soap and water.
Repairability	Not user-serviceable. Replace entire cartridge when empty or faulty.

Frequently Asked Questions - 51650C ink cartridge HP

How do I install the HP 51650C ink cartridge?

Open the printer's access door. The print carriage moves to the center. Remove the old cartridge and unpack the new one. Remove the orange protective tape. Insert the cartridge at a slight angle and push until it clicks. Close the access door. Run the alignment from the printer software if prompted.

Which printers are compatible with the HP 51650C cartridge?

This cartridge is compatible with many HP DeskJet 600, 800, 900 series and HP OfficeJet 500, 600 series printers. Check your printer manual or HP's website for full compatibility.

How many pages can I expect from the HP 51650C?

The page yield is approximately 400 pages based on 5% coverage (standard business letter). Actual yield varies depending on print content and settings.

Why is my print quality poor after installing a new cartridge?

First, ensure the protective tape was fully removed. If the tape is off, run the printer's cleaning cycle (usually found in the printer software or front panel). If still poor, try manually wiping the print head with a lint-free cloth dampened with distilled water.

How should I store unused ink cartridges?

Store cartridges in a cool, dry place at 15-35°C (59-95°F). Keep them in the original sealed package until ready to use. Avoid extreme temperatures and direct sunlight.

Can I refill the HP 51650C cartridge?

HP does not recommend refilling. Refilling can cause poor print quality, leaks, and damage to the printer. It may void the printer warranty. Use a new genuine HP cartridge for best results.

What should I do if ink gets on my skin or clothing?

Wash the affected area with soap and cool water immediately. For clothing, rinse with cold water and treat with stain remover before washing. If ink gets in eyes, rinse thoroughly with water and seek medical attention.

How do I know the cartridge is empty?

Your printer software or front panel display will show a low ink warning. Print quality may degrade, with faint or missing colors. The printer may stop printing when the cartridge is completely empty.

Is the HP 51650C a black or color cartridge?

The HP 51650C is a black ink cartridge. It prints only in black and grayscale. For color printing, you need a separate color cartridge (e.g., HP 51649A or similar).

How do I recycle an empty HP 51650C cartridge?

Participate in HP Planet Partners program. Drop off at participating retail stores or use a prepaid mailing label from HP. Many local recycling centers also accept ink cartridges.

USER MANUAL 51650C ink cartridge HP

Product Environmental Profile

HP 51650 C/M/Y

January 2005

Hewlett-Packard Company

Inkjet Printing Supplies Operations/Imaging and Printing Systems

1000 NE Circle Blvd.

Corvallis, OR 97330

Product description

Part Number: 51650C, 51650M, 51650Y

Selectability Number: 50

Compatible hp printer(s): HP DesignJet 250C, 650C, 650C/PS

Environmental certifications

This product conforms to the following voluntary environmental program criteria:

Blue Angel

HP inkjet print cartridges are produced at HP manufacturing sites around the world. These sites are certified by independent auditors to meet the requirements of ISO 14001 under HP's global registration of its worldwide manufacturing operations. More information about HP and ISO 14001 is available at http://www.hp.com/environment

Other features

HP has designed this product with the following additional features to help the user conserve resources:

Print quality tested for use on 100% recycled paper

Product safety information

For chemical information about related HP printer supplies, please refer to Material Safety Data Sheets for these products at: http://www.hp.com/go/msds

Product restricted materials

The information in this section refers to materials restricted by regulation or law and applies to parts, components and products sold by HP. This product does not contain:

Asbestos

Cadmium as a stabilizer, coloring agent or surface coating treatment.

Lead carbonates or sulfates are not contained in any paint applied.

Mercury (except lamps containing less than 10 mg)

Chlorofluorocarbons (CFCs), halons, HCFCs, HBFCs, 1,1,1 trichloroethane, carbon tetrachloride or methyl bromide.

Chlorinated or brominated dioxins or furans are not present at a concentration that is currently prohibited by law.

Polychlorinated biphenyls (PCB) or polychlorinated terphenyls (PCT).

For additional product material information about this product, see “additional product materials” below. For product material information for associated batteries and packaging, see “batteries” and “packaging”, below.

Additional product materials

Halogenated flame-retardants are not used in the housing plastics.

Batteries

This product does not contain batteries.

Packaging

Packaging materials do not contain lead, mercury, cadmium or hexavalent chromium as an intentionally added element. The sum concentration of incidental lead, mercury, cadmium and hexavalent chromium in the packaging for this product is less than 100mg/kg.

No chlorofluorocarbons (CFCs), halons, HCFCs, HBFCs, 1,1,1 trichloroethane, carbon tetrachloride or methyl bromide are used in plastic foam packaging materials.

Plastic packaging materials are marked according to ISO 11469 and DIN 6120 standards.

External:

Paperboard ¹ Weight: 24.4 g

Internal:

Information ¹ Weight: 5.1 g

¹ . Made from recycled paper. Actual proportions of recycled content will vary depending on geographic location.

The paperboard box and packaging inserts are recyclable through most municipal solid waste recycling programs where recycling programs exist. Paperboard recycling programs may not exist in your area.

The polystyrene trays, which protect the print heads from being damaged if dropped, can only be recycled where special polystyrene recycling programs exist.

The film pouch is a composite of several materials, which provide a vapor barrier, and cannot be recycled.

When required by retail companies, this product is packaged in a plastic “clamshell” to deter theft. The clamshell cannot be recycled.

To ensure compliance with local packaging take-back requirements, in the following European countries, HP is a member of a packaging recovery scheme. Some countries are operating a “Green Dot” system as indicated.

Countries with Green Dot systems

- Austria (ARA)

– Belgium (Fostplus: consumer products) (Val-I-Pac: professional products)

- France (Eco-Emballages)

- Germany (DSD)

- Ireland (Repak)

- Portugal (Punto Verde SA)

- Spain (Ecoembes)

– Sweden (Repa Registret)

Countries with no Green Dot system

- Finland (PYR Ltd)

- Italy (Conai)

- Norway (Materialretur)

– Switzerland (SWICO)

- UK (Valpak)

Some larger HP offices also accept HP product packaging* from customers in countries or areas without local packaging recovery schemes. Contact your local HP sales office for more information.

*This does not include packaging that is contaminated or contains dangerous substances, which should be disposed of in accordance with local regulations.

End-of-life management/ recyclability

Hewlett-Packard offers end-of-life HP product return programs in certain geographic areas.

To determine if a program is available for this HP product in your area, please refer to our recycling Web site at http://www.hp.com/recycle or contact your nearest HP sales office. Products returned to HP will be recycled, recovered or disposed of in a responsible manner

This HP product is designed to enhance end-of-life disposal options by:

Marking plastic parts weighing more than 25g according to ISO 11469 international standards

Eliminating glues and adhesives from product construction where technically feasible

Materials of construction

Plastics 31 grams total; 21-grams carbon-fiber filled PPO/HIPS blend, 5.5-grams PE/PP blend, 4.5-grams PP

Metals: 65 grams total; all stainless steel

Acronyms

PE PolyEthylene

PP PolyPropylene

PPO PolyPhenylene Oxide

HIPS High Impact Polystyrene

Company information

Environmental Policy

Hewlett-Packard Company established an environmental policy in 1992 with the goals of providing products and services that are environmentally sound throughout their lifecycles and conducting its operations worldwide in an environmentally responsible manner. HP has strengthened that commitment with the intent to be the recognized leader in inventing environmentally sustainable solutions for the common good.

ISO 14001

In June 2000 HP achieved ISO 14001 certification—the international standard for environmental management systems—of its worldwide manufacturing operations. Issued by the independent registration firm, Bureau Veritas Quality International (BVQI), this global certification is your assurance that HP's policies, procedures and organization for managing the environmental aspects of our operations meet the voluntary requirements of ISO 14001.

Ozone-Depleting Substances

Hewlett-Packard has eliminated all manufacturing process uses of chlorofluorocarbons (CFCs), HBFCs, halons, 1,1,1 trichloroethane (TCE), carbon tetrachloride and methyl bromide, and we require suppliers to avoid using these chemicals in their manufacturing processes.

For more information

The following information is available online at http://www.hp.com/environment

More about HP's commitment to the environment

Material Safety Data Sheets (MSDS) for HP printer supplies

Environmental profiles for many related HP products

End-of-life return and recycling programs for selected HP products, depending upon geographic location

© 2004 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.