Assento CPG 13TN GN AUTO DISP - Water heater Haceb - Free user manual and instructions

Product Type	Gas Water Heater
Brand	Haceb
Model	Assento CPG 13TN GN AUTO DISP
Capacity	13 liters
Energy Source	Natural Gas (GN)
Ignition	Automatic electronic ignition
Gas Consumption	1.5 m³/h (approx)
Water Connection	1/2 inch BSP
Gas Connection	1/2 inch BSP
Safety Features	Flame failure safety device, overheat protection, anti-dry burning protection
Temperature Control	Automatic thermostat with adjustable temperature (35-65°C)
Seasonal Mode	Summer/Winter mode selector
Dimensions (Approx)	800 x 400 x 400 mm (H x W x D)
Weight (Approx)	25 kg
Installation	Professional installation required; wall-mounted
Maintenance	Descaling every 6 months, clean burner annually
Warranty	2 years (parts and labor)
User Manual	Available for free download at notice-facile.com
Accessories Included	Installation kit, gas hose (not included)
Flue Type	Room-sealed (balanced flue) for safety

Frequently Asked Questions - Assento CPG 13TN GN AUTO DISP Haceb

How do I turn on the Haceb Assento CPG 13TN water heater for the first time?

Ensure gas supply is open and water inlet valve is open. Press the power button; the automatic ignition will start. If ignition fails, check gas supply and reset the device.

What should I do if there is no hot water?

Check if the gas supply is turned on and the pilot light is lit (if applicable). Ensure the temperature setting is high enough. Also, verify the water heater is not in summer mode (lower heating). If problem persists, contact Haceb service.

How often should I descale the water heater?

Descaling is recommended every 6 months in hard water areas. Use a descaling solution suitable for gas water heaters. Follow the instructions in the user manual to avoid damage.

Can I install the water heater myself?

No, installation must be performed by a qualified professional according to local gas safety regulations. Improper installation can cause gas leaks or carbon monoxide poisoning.

What type of gas does this water heater use?

This model is designed for natural gas (GN). Ensure the supply gas matches the label on the device. Do not use LPG unless the kit is changed by a professional.

Why does the water heater make a loud noise during operation?

Noise can be due to limescale buildup in the heat exchanger, or irregular gas pressure. Descaling the unit and checking gas pressure may resolve the issue. If noise persists, call technical support.

How do I clean the burner of the water heater?

Turn off gas and power before cleaning. Remove the burner cover and gently brush the burner ports with a soft brush to remove dust. Do not use water; use a vacuum cleaner if needed. Reassemble and test.

What does the error code E01 mean?

Error code E01 typically indicates flame failure. Check gas supply, thermocouple, and flue blockage. Reset the water heater by turning off for 10 seconds. If code persists, contact service.

How to adjust the water temperature?

Use the temperature control knob on the front panel. Rotate clockwise to increase temperature (max 65°C) and counterclockwise to decrease. For precise setting, consult the manual.

Is it safe to leave the water heater on overnight?

Yes, it is safe if properly installed. The water heater has overheat protection and will automatically shut off if abnormal temperature occurs. However, for energy savings, consider turning it off when not in use.

USER MANUAL Assento CPG 13TN GN AUTO DISP Haceb

Figura 2.

Partes internas

CAL AS CPG-10TN GN DISP BL CAL AS CPG-13TN GN DISP BL

Abstract 3D letter 'S' with a hand icon, rendered in grayscale (no text or symbols)

Servicio Haceb

más cerca

•ASESORÍA

White Huxeb water heater with control panel and wheels (no visible text or symbols)