QW131T - Washing machine HUSQVARNA - Free user manual and instructions

Product Type	Washer-Dryer Combo
Brand	Husqvarna
Model	QW131T
Energy Class	A
Load Capacity (Wash)	7 kg
Load Capacity (Dry)	4 kg
Spin Speed	1400 rpm
Dimensions (W x H x D)	60 cm x 85 cm x 55 cm
Weight	70 kg
Power Supply	220-240 V / 50 Hz
Power Consumption	2000 W
Water Consumption	50 L per cycle (approx.)
Noise Level (Wash/Spin)	55 dB / 75 dB
Programs	Cotton, Synthetics, Delicates, Quick Wash, Wool, Rinse, Spin, Drying
Display	LED with program status and remaining time
Delay Start	Up to 24 hours
Safety Features	Child lock, overflow protection, unbalanced load control
Drying Technology	Condenser drying with auto-dry sensor
Maintenance	Clean lint filter after each drying cycle; clean drain pump filter regularly
Spare Parts Availability	Door seal, drum bearings, control board, pump, heater available
Repair Index (Reparability)	7.0 / 10

Frequently Asked Questions - QW131T HUSQVARNA

How do I start a washing cycle on the Husqvarna QW131T?

Load the laundry, add detergent, select the desired program using the program dial, and press the Start/Pause button.

Can I delay the start of a cycle?

Yes, use the Delay Start function to set a timer from 1 to 24 hours before the cycle begins.

What is the maximum spin speed of the QW131T?

The maximum spin speed is 1400 rpm, which can be adjusted via the spin speed selector.

How do I use the drying function?

After washing, select a drying program (e.g., cotton or synthetics) and set the desired drying time or use the auto-dry option that stops when clothes are dry.

What should I do if the machine does not start?

Check that the door is fully closed, the water supply is on, and the machine is plugged in. Also ensure the child lock is not activated.

How often should I clean the lint filter?

Clean the lint filter after every drying cycle to maintain performance and prevent fire hazards.

Where is the drain pump filter located?

The drain pump filter is located at the bottom front of the machine, behind a small access panel.

The display shows an error code. What does it mean?

Refer to the manual's troubleshooting section for specific error codes. Common codes indicate water supply, drainage, or unbalanced load issues.

Can I wash and dry a full load in one cycle?

This machine offers wash-and-dry cycles, but the drying capacity is lower (4 kg) than the wash capacity (7 kg). For optimal drying, reduce the load.

How do I replace a broken door seal?

Contact Husqvarna customer service or an authorized technician for replacement. The door seal (gasket) is a spare part available online.

USER MANUAL QW131T HUSQVARNA

Line drawing of a front-loading washing machine with a large circular component (no text or symbols)

INNEHÅLLSFÖRTECKNING

Säkerhetsinformation 4

BESKRIVNING AV PANELENS FUNKTIONER

1. Programschema

Simple geometric shapes: square with central dot and three circles, resembling abstract symbols (no text or labels)

3. Välj torktid

Hand holding a circular object with a pointer and scale marker (no text or symbols)

4. Avslutad torktid

Illustration of a hand using a tool to cut a circular object, no text or symbols present

Line drawing of two overlapping circular objects with a hand holding the ring (no text or symbols)

OM TORKTUMLAREN INTE FUNGERAR

Diagram of a bolt and nut assembly with circular arrows indicating rotation (no text or symbols)

Simple line drawing of a two-tiered rectangular box with circular cutouts (no text or symbols)

Frånluftsanslutning

Diagram of a washing machine with two crossed lines indicating resistance or crossed-out components (no text or symbols)

Technical line drawing of a mechanical device with labeled components (no readable text or symbols)