MT06 - Flashlight Nitecore - Free user manual and instructions

Product Type	Compact keychain flashlight
Brand	Nitecore
Model	MT06
Dimensions	75 mm (length) x 15 mm (diameter)
Weight	20 g (including batteries)
Power Source	2 x AAA batteries (alkaline or NiMH)
Max Output	180 lumens
Beam Distance	50 meters
Modes	High, Medium, Low
Runtime (High)	1 hour
Runtime (Low)	15 hours
Waterproof Rating	IPX-8 (submersible up to 2 meters)
Impact Resistance	1.5 meters drop resistance
Lens	Optical glass with anti-reflective coating
Switch	Tail cap button for momentary and constant on
Body Material	Aerospace-grade aluminum alloy
Surface Treatment	HAIII hard-anodized finish
Included Accessories	Keychain ring, spare O-ring
Battery Replacement	Unscrew tail cap, insert AAA batteries with correct polarity
Cleaning	Wipe with dry cloth; avoid solvents
Safety	Do not look directly into beam; keep away from children; use only recommended batteries
Spare Parts Availability	Tail cap switch, O-rings, clip (if applicable) from Nitecore service centers

Frequently Asked Questions - MT06 Nitecore

What type of batteries does the Nitecore MT06 use?

The Nitecore MT06 uses two AAA batteries. Both alkaline and NiMH rechargeable batteries are compatible.

How bright is the MT06?

The maximum output is 180 lumens, with a beam distance of up to 50 meters.

Is the MT06 waterproof?

Yes, it has an IPX-8 rating, meaning it can be submerged in water up to 2 meters deep.

How do I change the modes?

Cycle through modes by quickly pressing the tail button repeatedly. The order is High > Medium > Low.

What is the runtime on high mode?

On high mode, the runtime is approximately 1 hour with alkaline batteries.

Can I use rechargeable batteries?

Yes, NiMH rechargeable AAA batteries work well and may provide longer runtime.

How do I replace the batteries?

Unscrew the tail cap, remove old batteries, insert two AAA batteries with the correct polarity (+/-), and screw the tail cap back on.

Is the MT06 impact resistant?

It can withstand drops from up to 1.5 meters.

What is the body material?

The body is made of aerospace-grade aluminum alloy with a hard-anodized finish for durability.

Where can I get spare parts?

Spare parts like tail cap switches and O-rings are available through Nitecore's authorized service centers or website.

USER MANUAL MT06 Nitecore

NITECORE® The All-Round Flashlight Expert

MT06 User Manual

Features

• Features a CREE XQ-E R2 LED with max output of 165 lumens
• Powered by 2xAAA batteries for max runtime of 5 hours and 15 minutes
• Two brightness levels available
• Reverse rear switch design for one-handed operations
• High efficiency constant current circuitry provides unwavering and dependable output
  • Stainless steel clip included
• Toughened ultra-clear mineral glass with anti-reflective coating
• Constructed from aerospace grade aluminum alloy
• HAIII military grade hard-anodized
• Waterproof in accordance with IPX8 (2-meter submersible)
• Impact resistant to 1.5 meters

Dimensions

Length: 5.04" (128mm)

Head diameter: 0.55" (14mm)

Tail diameter: 0.55" (14mm)

Weight: 0.78oz (22g) (without battery)

Accessories

Spare o-ring

Battery Options

	TYPE	Nominal voltage	Compatible
Primary AAA battery	AAA 1.5V		Y (Recommended)
Rechargeable AAA battery	AAA 1.2V		Y (Recommended)
LiFePO4 battery	10400 3.2V		N (Banned)
Rechargeable Li-ion battery	10400 3.7V		N (Banned)

Brightness & Runtime

FL 1 STANDARD HIGH LOW
	165 LUMENS	32 LUMENS
	45min	5h15min
	92m (Beam Distance)
	2120cd(Peak Beam Intensity)
	1.5m (Impact Resistant)
	IPX8,2m(Waterproof AND Submersible)

NOTICE:

The above data has been measured in accordance with the international flashlight testing standards ANSI/NEMA FL1 using 2 x 1.2 V 750mAh AAA batteries under laboratory conditions. The data may vary slightly during real-world use due to battery type, individual usage habits and environmental factors.

Operating Instructions Battery Installation

Please install 2xAAA batteries as illustrated. WARNIG: Insert the battery with the positive pole (+) pointing towards the head. The MT06 is not operational with incorrectly inserted batteries.

On/Off Operation

With the light turned off, press the switch until a click is heard to enter low output directly. Press the switch again to turn the light off.

Brightness Levels

With the light turned on, reactivate the MT06 within 2 seconds or simply press the switch halfway to switch between high mode and low mode.

NOTE: The MT06 will begin adjusting output lumens automatically after 5 minutes of use, thus preventing overheating and extending battery life.

Changing Batteries

Batteries should be replaced when output appears to be dim or the flashlight becomes unresponsive.

Maintenance

Every 6 months, threads should be wiped with a clean cloth followed by a thin coating of silicon-based lubricant.

Warranty Service

All NITECORE® products are warranted for quality. Any defective / malfunctioning NITECORE® product can be repaired free of charge for a period of 60 months (5 years) from the date of purchase. Beyond 60 months (5 years), a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.

The warranty is nullified in all of the following situations:

1. The product(s) is/are broken down, reconstructed and/or modified by unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
   For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to [e-mail]

※All images, text and statements specified herein this user manual are for reference purpose only. Should any discrepancy occurs between this manual and information specified on www.nitecore.com, information on our official website shall prevail. Sysmax Industry Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.

SYSMAX Ind.

SYSMAX Industry Co., Ltd.

TEL: [phone]

FAX: [phone]

E-mail: [e-mail]

Web: www.nitecore.com

Address: Rm1401-03, Glorious Tower, 850 East Dongfeng Road,

Guangzhou, China 510600