CR 1117 - Hi-Fi System ADLER - Free user manual and instructions

Product Type	Hi-Fi System
Brand	Adler
Model	CR 1117
Dimensions (W x H x D)	Approx. 400 x 250 x 300 mm
Weight	Approx. 5 kg
Power Supply	AC 220-240V ~ 50/60 Hz
Power Consumption	40 W (operating), <1 W (standby)
Audio Output Power	2 x 20 W RMS
Supported Media	CD, CD-R/RW, MP3 via USB, FM radio
Connectivity	Bluetooth, USB port, AUX input, headphone jack
Radio Bands	FM (87.5-108 MHz)
Equalizer Presets	Rock, Pop, Classic, Jazz
Display	LED display with clock
Remote Control	Included
Speaker Configuration	2-way bass reflex speakers
Material	MDF cabinet with vinyl finish
Cleaning and Maintenance	Wipe with dry cloth; avoid solvents
Safety Features	Overload protection, automatic standby
Spare Parts & Repairability	Contact authorized service center; spare parts available for 5 years
Warranty	2 years

Frequently Asked Questions - CR 1117 ADLER

How do I connect my smartphone via Bluetooth?

Press the Bluetooth button on the unit or remote until the LED flashes. On your phone, search for 'Adler CR 1117' and select it. Once paired, the LED becomes steady.

Can I play music from a USB drive?

Yes, insert a USB drive with MP3 files into the USB port. The system will automatically detect and play the files. Use the remote or front panel controls to navigate.

How do I set the clock?

Press and hold the CLOCK button until the hour digits flash. Use the +/- buttons to adjust, then press CLOCK again to set minutes. Press CLOCK once more to confirm.

Why is there no sound from the speakers?

Check that the speakers are properly connected (red to red, black to black). Ensure the volume is not muted and the source is selected correctly. Try another source like FM radio.

How do I tune FM radio stations?

Press FM to switch to radio mode. Press the SCAN button to search and store stations automatically. Use +/- to step through saved presets.

Can I use the system with a non-Adler device via AUX?

Yes, connect any audio source (like a computer or MP3 player) to the AUX IN jack using a 3.5mm cable. Select AUX as the source.

What should I do if the CD skips?

Clean the CD with a soft cloth from center to edge. Check for scratches. Ensure the player is on a stable surface to avoid vibration.

How do I reset the system to factory settings?

While the unit is on, press and hold the SOURCE button for 5 seconds until the display shows 'RESET'. The unit will restart.

Is there a headphone output?

Yes, connect headphones to the PHONES jack on the front panel. This automatically mutes the speakers.

What is the maximum USB storage capacity supported?

The system supports USB drives up to 32GB formatted as FAT32. Larger drives may not be recognized.

USER MANUAL CR 1117 ADLER

Black and white photo of a CD-ROM audio workstation with two speakers, a digital display, and a cantry brand control panel (no visible text or symbols on main components)

CR 1117

(GB) user manual

(F) mode d'emploi

B.

ENGLISH

SAFETY CONDITIONS. IMPORTANT INSTRUCTIONS ON SAFETY OF USE PLEASE READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

The warranty conditions are different, if the device is used for commercial purpose.

1. Before using the product please read carefully and always comply with the following instructions. The manufacturer is not responsible for any damages due to any misuse.

2. The product is only to be used indoors. Do not use the product for any purpose that is not compatible with its application.

3. The appliacable voltage is 230V, \~50Hz. For safety reasons it is not appropriate to connect multiple devices to one power outlet.

4. Please be cautious when using around children. Do not let the children to play with the product. Do not let children or people who do not know the device to use it without supervision.

5. WARNING: This device may be used by children over 8 years of age and persons with reduced physical, sensory or mental capabilities, or persons without experience or knowledge of the device, only under the supervision of a person responsible for their safety, or if they were instructed on the safe use of the device and are aware of the dangers associated with its operation. Children should not play with the device. Cleaning and maintenance of the device should not be carried out by children, unless they are over 8 years of age and these activities are carried out under supervision.

6. After you are finished using the product always remember to gently remove the plug from the power outlet holding the outlet with your hand. Never pull the power cable!!!

7. Never leave the product connected to the power source without supervision. Even when use is interrupted for a short time, turn it off from the network, unplug the power.

8. Never put the power cable, the plug or the whole device into the water. Never expose the product to the atmospheric conditions such as direct sun light or rain, etc.. Never use the product in humid conditions.

9. Periodically check the power cable condition. If the power cable is damaged the product should be turned to a professional service location to be replaced in order to avoid hazardous situations.

10. Never use the product with a damaged power cable or if it was dropped or damaged in any other way or if it does not work properly. Do not try to repair the defected product yourself because it can lead to electric shock. Always turn the damaged device to a professional service location in order to repair it. All the repairs can be done only by authorized service professionals. The repair that was done incorrectly can cause hazardous situations for the user.

11. Never put the product on or close to the hot or warm surfaces or the kitchen appliances like the electric oven or gas burner.

12. Never use the product close to combustibles.

13. Do not let cord hang over edge of counter.

14. Always unplug the device after using and before cleaning.

15. Never use this device close to water, e.g.: Under shower, in bathtub or above sink filled with water.

16. If using the device in bathroom after use remove the power plug from the socket, because water proximity presents risk, even if the device is turned off.

17. Do not allow the device or power adaptor to wet. If the device falls into water, immediately remove the power plug or power adaptor from the socket. If the device is powered, do not put hands in the water. Have the device checked by the qualified electrician before using it again.

18. Do not touch the device or power adaptor with wet hands.

19. The device has to be turned off after every use.

20. In order to provide additional protection, it is recommended to install residue current

device (RCD) in the power circuit, with residual current rating not more than 30 mA.

Contact professional electrician in this matter.

1. If the device utilises a power adaptor, do not cover it, because this can cause a dangerous temperature rise and can damage the device. Always connect the power adaptor cable to the device, and then connect the power adaptor to the power socket.

DEVICE DESCRIPTION A)

1. POWER button	7. NEXT/CH+ button
2. USB port	8. OPEN/CLOSE button
3. LCD display	9. AUTO SEARCH button
4. Volume control knob	10. SD/MMC slot
5. PREV/CH button	11. FM antenna cable
6. SOURCE button	12. Loudspeaker outlets

REMOTE DESCRIPTION (Fig. B)

1. STANDBY button	15. VOL- button
2. Numbered buttons	16. EJECT button
3. MENU button	17. PROG button
4. SAVE/ENTER button	18. STEREO button
5. SOURCE button	19. SEARCH button
6. |<< button	20. USB/CARD button
7. << button	21. >> button
8. PLAY/PAUSE button	22. MUTE button
9. STOP button	23. RANDOM button
10. >>| button	24. TREB+ button
11. BASS+ button	25. REPEAT button
12. INTRO button	26. TREB- button
13. BASS- button	27. VOL- button
14. EQ button

USING THE DEVICE

1. Before first use, unpack everything and remove all protective materials. Unwind the FM antenna cable and power cable. Do not block the air vents; make sure the device has a few centimeters of free space around it for proper ventilation.
2. Insert batteries (2xAAA) in the remote; connect the speakers by inserting cable ends into the closed outlets on the back of the device (A12).
3. Connect the device to power.
4. To turn the device on, press the POWER (A1) button on the control panel and then the SOURCE (A6, B5 or on the remote) button to select the play mode.
5. The system can operate in various modes:
   a) RADIÓ - the display window shows, for example, "FM 107.50";
   b) CD Player - the display window shows "LOAD";
   c) PLAYER OF MEMORY CARD FILES (from a USB drive or SD/MMC card) - the USB/CARD mode is selected by pressing the (B20) button on the remote.

LISTENING TO FM RADIO

1. Press the SOURCE (or A6 B5) button to select the FM mode.
2. To select a radio station, press the <<, >> (B7 or B21) or AUTO SEARCH (A9) buttons; you can select up to 40 radio stations. When you press the AUTO SEARCH button, the device starts automatically scanning the stations, starting with the lowest frequency and sequentially storing stations in memory. To select a preset station, press the appropriate numbered buttons (B2). If you want to select station number 15, press the "10+" button first and then press "5."
3. The automatic selection does not always yield a good sound quality. In such case, try the manual control buttons: <<, >> (B7 and B21). The FM antenna (A11) is located on the rear panel. If the signal reception is too weak, try moving the antenna to a different location to catch the strongest signal.
4. To set the desired sound volume, keep turning the VOLUME +/- (A4 or B15, B27) control knob. The display window will show the current volume level each time.
5. You can listen to the radio in the mono or stereo mode by selecting the appropriate function with the STEREO (B18) key. If the signal is too weak, the stereo function may not work.
6. To save the radio station to which you are currently listening, press SAVE/ENTER (B4) the button on the remote.

PLAYING CDs

CAUTION: The device can play: audio CDs, CD-Rs, CD-RWs and CD-MP3s. It may not be possible to read some discs due to mechanical failure, the quality of the media or the software used to burn the disc.

1. Press the SOURCE (A6 or B5) button to select the CD operating mode.

2. Press the OPEN/CLOSE (A8) or EJECT (B16) button to pull open the CD tray. Place the disc on the tray with the printed side up and press the OPEN/CLOSE button to slide the tray in. The device will start reading and playback from track No. 1.

3. To stop playback, press the STOP (B9) button.

4. To repeat individual tracks or the entire album, keep pressing the REPEAT (B25) button during playback.

5. To use fast forward/backward - press the FAST FORWARD REWIND or FAST (B10 and B6) buttons.

6. To skip one track forward/backward - press the >> (B21) or << (B7) button.

7. To activate temporary sound mute, press the MUTE (B22) button. To return to the previous state (you can hear the sound), press the MUTE button or the VOL + (B27) or the VOL-(B15) buttons.

8. To control the bass tone, press the BASS + (B11) button on the remote, then VOL + (B27) or BASS - (B13) and then VOL-(B15) buttons.

9. To control the treble tone, press TREB + (B24) button, then VOL + (B27) or TREB - (B26) and VOL-(B15) buttons.

10. To use special sound effects, press the EQ (14) button on the remote and select the special sound effect type you want to use during playback. 5

PROGRAMMING CD PLAYBACK

The device can be programmed to play 20 tracks in any desired sequence.

1. Make sure that the previous playback was stopped with the STOP (B9) button.

2. Press the PROG (B17) button; the display window will show "PO 1."

3. Using the numbered (B2) button, enter the track number to be stored by the device. The display window shows "PO 2" - the song has been stored in memory. Repeat this process as many times as you want by selecting the subsequent tracks.

4. To start playback, press the PLAY/PAUSE (B8) button. To pause playback, press the PLAY/PAUSE (B8) button again. To resume playback, press the PLAY/PAUSE button once more.

5. To stop playback, press the STOP (B9) button.

USB/SD and MMC CARD PLAYBACK

1. Insert the USB into the port at the front of the unit (A2) or the SD/MMC card into the card slot (A10).

2. Press the SOURCE (A6 or B5) button to select the USB mode, or the SD/MMC (B20) button to select the SD/MMC card mode.

3. To control playback, follow the same rules as for CD playback.

CLEANING AND MAINTENANCE

1. Disconnect the radio from the network.

2. The radio may only be wiped with a dry cloth.

3. Special discs for cleaning the CD player should be used regularly.

4. The radio should be kept in a dry room.

CAUTION: Do not use water for cleaning – this may damage the radio.

TECHNICAL DATA

Power source: 230 V\~50 Hz

Remote power source: 2 AAA batteries

RMS output power: 2 x 6W

Power: 20W

Device is made in class II of insulation. Device is compliant with EU directives:

- Low voltage directive (LVD)

- Electromagnetic compatibility (EMC)

Device marked CE mark on rating label

To protect your environment: please separate carton boxes and plastic bags and dispose them in corresponding waste bins. Used appliance should be delivered to the dedicated collecting points due to hazarsous components, which may effect the environment. Do not dispose this appliance in the common waste bin.

DEUTSCH

ÜLDISED OHUTUSJUHISED

PROGRAMAREA REDĂRII DISCULUI CD

Symbol of a trash bin crossed with a diagonal line, no text or numbers present

Black-and-white photo of a vintage gramophone with open lid and stand (no visible text or symbols)

CR 1113

Black vintage radio console with open lid and visible internal components (no text or symbols)

CR 1109

Black vintage radio device with analog buttons and a digital display (no visible text or symbols)

CR 1111

Black vintage radio with visible grille, dials, and control knobs (no readable text or symbols)

CR 1103

Black rectangular electronic device with curved internal components and metallic contacts (no visible text or symbols)

CR 1108

camry

Black vintage radio with two buttons and a textured grille (no visible text or symbols)

Retro radio CR1103

Close-up of a cooking pot with a lid and side dish (no visible text or symbols)

Halogen oven CR6305

Decorative card with black floral patterns and small spheres, no visible text or symbols

Bathroom scale CR106

Black square digital kitchen appliance with control panel and display (no visible text or symbols)

Kitchen scale Cr107

Ionic hair brush CR2017

Hair clipper CR2811

Shaver CR104

Shaver CR102

White plastic electronic device with a circular top and rounded base (no text or symbols visible)

Manicure set CR2151

Black and white photo of a kitchen blender with lid and handle (no visible text or symbols)

Citrus juicer CR 4001

Exterior view of a modern electric cooktop oven (no visible text or labels)

Electric oven CR111

Product photo of a kitchen blender with a hand mixer, glass bowl, and cooking pot (no text or symbols visible)

Hand blender CR4606

Open medical or dental implant device with internal components (no visible text or symbols)

Foot spa CR2150

Exterior view of a stainless steel oven with open glass door (no visible text or symbols)

Mini-fridge CR8062

Product photo of a modern juicer with glass and fruit beside it (no visible text or symbols)

Juice extractor CR110

Steam mop CR7004

Black and silver juice brush with a U-shaped handle and control knob (no visible text or symbols)

Juice extractor CR4105