CS26VCSR - Styler Conair - Free user manual and instructions

Product Type	Hair Straightening Brush
Brand	Conair
Model	CS26VCSR
Dimensions (L x W x H)	10.5 x 2 x 2.5 inches
Weight	1.2 lbs
Power Source	120V AC, 60Hz
Wattage	30 Watts
Heating Technology	Ceramic bristles for even heat distribution
Temperature Settings	5 adjustable heat settings (250°F - 450°F)
Heat-Up Time	Less than 30 seconds
Auto Shut-Off	After 60 minutes of inactivity
Swivel Cord	8-foot professional swivel cord
Plate Material	Tourmaline ceramic
Dual Voltage	Yes (120V/240V) for travel
Warranty	2-year limited warranty
Cleaning	Wipe with damp cloth; do not submerge in water
Safety Features	Auto shut-off, heat-resistant glove included
Replaceable Parts	None; unit is sealed
Certifications	UL listed

Frequently Asked Questions - CS26VCSR Conair

What is the Conair CS26VCSR styler used for?

The Conair CS26VCSR is a hair straightening brush that smooths and straightens hair while adding shine, ideal for daily styling and touch-ups.

How do I adjust the temperature on the CS26VCSR?

The device has 5 heat settings. Press the temperature control button to cycle through settings from 250°F to 450°F. Choose a lower setting for fine hair and higher for thick/coarse hair.

Does the Conair CS26VCSR have automatic shut-off?

Yes, it features an auto shut-off function that turns the styler off after 60 minutes of inactivity for safety.

Can I use this styler on wet hair?

It is recommended to use the CS26VCSR on dry or damp hair. For best results, blow-dry your hair completely before using.

How long does it take to heat up?

The styler heats up in less than 30 seconds, allowing for quick styling.

Is the Conair CS26VCSR suitable for travel?

Yes, it has dual voltage capability (120V/240V) and a global voltage adapter may be needed for some countries.

How do I clean the straightening brush?

Unplug and allow to cool. Wipe the bristles and body with a damp cloth. Do not immerse in water or use abrasive cleaners.

What does the warranty cover?

Conair offers a 2-year limited warranty against defects in materials or workmanship. Register online for full coverage.

Can the bristles be replaced?

The bristles are not replaceable as the unit is sealed. If damaged, the entire device should be replaced.

Does the styler come with any accessories?

Yes, it includes a heat-resistant glove for safe handling during use.

USER MANUAL CS26VCSR Conair

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING KEEP AWAY FROM WATER

DANGER —Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock:

1. Always unplug appliance immediately after using.

2. Do not use while bathing or in a shower.

3. Do not place or store appliance where it can fall or be pulled into a tub or sink.

4. Do not place in, or drop into water or other liquids.

5. If an appliance falls into water, unplug it immediately. Do not reach into the water.

WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons: 1. This appliance should never be left unattended when plugged in.

1. Do not pull, twist, or wrap line cord around appliance, even during storage.

2. Close supervision is necessary when this appliance is used by, on or near children or individuals with certain disabilities.

3. Use this appliance only for its intended

use, as described in this manual. Do not use attachments not recommended by the manufacturer.

1. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to an authorized service center for examination and repair.

2. Keep the cord away from heated surfaces.

3. Never place the appliance on a soft surface, such as a bed or couch, where the air openings may be blocked.

4. Never use while sleeping.

5. Never drop or insert any object into any opening or hose.

6. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.

7. This straightener is hot when in use. Do not let heated surfaces, touch eyes or skin. 12. Do not place the heated straightener directly on any surface or on the appliance power cord while it is hot or plugged in.

8. Before plugging in, read the information about dual voltage contained in the instruction section of this manual.

9. Do not attempt to touch the housing of your appliance near the straightening plates, as it is hot when in use.

SAVE THESE INSTRUCTIONS

OPERATING INSTRUCTIONS

This straightening iron is intended for household use. This unit is designed to operate at 120/240 volts AC. Use on Alternating Current (50/60 hertz) only.

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

DUAL VOLTAGE

This straightening iron will automatically adjust to the proper voltage. Use an adapter plug with correct configuration prior to use in outlet.

DRYING SYSTEM WITH

UNIQUE WET·DRY DESIGN

This Wet• Dry Tourmaline Ceramic Straightener features our exclusive vent and channel design, allowing for use on dry or damp hair. When used on damp hair, excess water is forced into channels where it can escape as steam. The steam evaporates through the vents in the housing, while the hair's natural moisture is sealed into the cuticle.

CAUTION: Steam evaporating through the vents may be hot. During use, avoid touching or blocking the vents and direct drying vents away from your scalp and face.

STRAIGHTENING BASICS

1. Plug the straightening iron cord into any household outlet (120/240V).
2. Press the On/Off button. Select desired temperature, or push the Wet or Dry temperature button to choose preset temperatures for specific hair conditions.
3. Red indicator light will blink until selected temperature is reached, then will remain lit.
4. Push the Wet or Dry button, the red indicator light will stop blinking and remain lit. Green or yellow indicator light will blink until the preset temperature reached, then will remain lit. Press the Wet or Dry button again, green or yellow light will go off.
5. To turn off the unit, press the On/Off button again. Red indicator light will go off. NOTE: Never leave your straightening iron on and unattended. However, should you fail to turn the unit off, it will shut itself off automatically within 60 minutes.

WARNING: The straightening iron's tour-maline ceramic-coated plates will get very hot within a few seconds and should not be placed in contact with the skin after the straightening iron has been turned on.

Start with a hair section that is 2 in. wide and no more than 12 in. thick. Open the iron and place a hair section between the two hot plates, close to the scalp. Trap hair between the plates by firmly squeezing the handles together. While maintaining the tension, slowly pull the unit down along the hair section toward the end. At the end of hair section, release the pressure on the handle and allow the hair section to slide out. Repeat process on additional sections of hair until you achieve the hair style you desire. It may be necessary to repeat process on certain areas, depending on the texture of your hair or how damp it is.

Some experience is necessary when learning to use this straightening iron. After using the iron several times, you will easily learn the ideal way to straighten and style your hair.

NOTE: Please refer to the temperature setting guide for heat settings, especially if using your iron on damp hair.

STYLING WITH THE NEW EASY-GLIDE FLOATING TOURMALINE CERAMIC-COATED PLATES

The plates of your new straightening iron are designed with a little give, to “float” in your iron. This provides better contact with hair, eliminating gaps for straighter results. The easy-glide tourmaline ceramic surface is the one of the latest – and best – technological advances in hair appliances. The tourmaline ceramic even heat distribution produces the ultimate in healthy, shiny, silky-looking hair. You’ll find that hair glides easily over the surface of the plates as you’re straightening, and that it is easier to clean styling product residue, etc. off the plates after each use. The tourmaline ceramic surface also helps smooth down flyaways and frizzies. As you smooth your hair, heat is evenly distributed so that the style you create has a salon-perfect, silky-smooth, shiny finish. Hair also glides right through the plates after it’s straightened. Tourmaline ceramic technology is a pleasure to work with, makes styling your hair easier and provides professional results.

USING INSTANT HEAT,

THE 6 WET • DRY VARIABLE

TEMPERATURE SETTINGS &

UNIFORM HEAT RECOVERY SYSTEM

This straightening iron features Cohair's Instant Heat technology. Within this Instant Heat technology there are 6 variable wet • dry temperature settings for every type of hair, from the finest to the curliest and most resistant. Use the low settings for damp hair, and as your hair dries turn to the Medium / Wet settings. Once hair is completely dry, use the Medium to High/Dry settings to complete the straightening process.

Temperature Setting Guide

TEMP. CONTROL HAIR TYPE
Low 1	Delicate, thin, easy-to-straighten hair
Medium/Wet 2-3	Average to thick or treated hair
Med-High 4 -5	Thick or wavy hair
High/Dry 6	Hard-to-straighten hair

And that's not all. Conair's professional salon standards of engineering provide you with a Uniform Heat Recovery System that maintains the straightening iron at a constant temperature.

There is a constant surge of power to ensure that heat is continuously delivered for optimal styling results, unlike other units that lose heat during use. This provides consistent styling power so that every strand of your hair is set with the same level of heat and comes out the same way for a perfect finish.

©2010 Canair Corporation 150 Midwest Road, East Windsor, NJ 08520 7475 North Glen Harbor Blvd., Glendale, AZ 85307

Centro de servicio Conair Corporation Service Department 7475 N. Glen Harbor Blvd. Glendale, AZ 85307

com/registration.

USER MAINTENANCE

Your straightening iron is virtually maintenance-free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer.

CAUTION

NEVER allow the power supply cord to be pulled, twisted, or severely bent. Never wrap the cord tightly around the appliance. Damage will occur at the high flex point of entry into the appliance, causing it to rupture and short. Inspect the cord frequently for damage. Stop use immediately if damage is visible or if unit stops or operates intermittently.

STORAGE

When not in use, your appliance is easy to store. Allow appliance to cool, then simply put back in the box and store out of reach of children in a safe, dry location. Do not jerk or strain cord at plug connections.

KEEP AWAY FROM WATER

Everyone knows that electricity and water are a dangerous combination. But did you know that an electric appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.

ALWAYS UNPLUG SMALL APPLIANCES

LIMITED TWO YEAR WARRANTY

Conair will repair or replace (at our option) your unit free of charge for 24 months from the date of purchase if the appliance is defective in workmanship or materials.

To obtain service under this warranty, return the defective product to the service center listed, together with your purchase receipt and \$5.00 for postage and handling. California residents need only provide proof of purchase and should call 1-800-3-CONAIR for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 24 months from the date of manufacture.

ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 24-MONTH DURATION OF THIS WRITTEN WARRANTY.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER.

Some states do not allow the exclusion or limitation of special, incidental, or consequential damages, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

Please register this product at: www.conair.com/registration

Service Center

Conair Corporation Service Department 7475 N. Glen Harbor Blvd Glendale, AZ 85307

©2010 Conair Corporation 150 Milford Road, East Windsor, NJ 08520 7475 North Glen Harbor Blvd., Glendale, AZ 85307

10NP18037

1½ in. Tourmaline Ceramic Straightener

dry 'n straight

Model CS26VCS