SWEEX CR005V3-OEM - Memory reader

CR005V3-OEM - Memory reader SWEEX - Free user manual and instructions

Find the device manual for free CR005V3-OEM SWEEX in PDF.

📄 1 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice SWEEX CR005V3-OEM - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Memory Card Reader
Brand Sweex
Model CR005V3-OEM
Supported Card Types SD, SDHC, SDXC, microSD, microSDHC, microSDXC, MMC, RS-MMC, MS, MS Pro, MS Duo
Interface USB 2.0, USB 1.1
Power Supply USB bus powered (5V, 500mA)
Dimensions (L x W x H) 70 x 50 x 15 mm (2.76 x 1.97 x 0.59 in)
Weight 50 g (1.76 oz)
Cable Length 15 cm (5.9 in)
Color Black
Housing Material Plastic
LED Indicator Yes (power/activity)
Operating System Compatibility Windows XP/Vista/7/8/10/11, Mac OS X, Linux
Plug and Play Yes (no driver required for most OS)
Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
Storage Temperature -20 °C to 70 °C (-4 °F to 158 °F)
Humidity 10% to 90% (non-condensing)
Maintenance Clean with a dry, soft cloth. Avoid liquids and abrasives.
Safety Precautions Keep away from water, heat sources, and direct sunlight. Do not disassemble.
Spare Parts Not available; device is not user-serviceable.
Repairability Non-repairable; replace the unit if defective.
Warranty 1 year limited warranty
Package Contents Card reader, quick start guide

Frequently Asked Questions - CR005V3-OEM SWEEX

What memory card types does the Sweex CR005V3-OEM support?
The Sweex CR005V3-OEM supports SD, SDHC, SDXC, microSD, microSDHC, microSDXC, MMC, RS-MMC, Memory Stick (MS), MS Pro, and MS Duo cards.
Does the Sweex CR005V3-OEM require driver installation?
No, it is plug-and-play on Windows, Mac OS X, and Linux. The operating system will automatically recognize it as a mass storage device.
What is the maximum storage capacity supported?
It supports SDXC cards up to 2 TB theoretically, but actual capacity depends on the card's compatibility and file system formatting.
Can I use the Sweex CR005V3-OEM to boot my computer?
Yes, if your computer's BIOS supports booting from USB mass storage devices, you can boot from a memory card inserted in the reader.
Why is my memory card not being detected?
Ensure the card is fully inserted and the reader is properly connected. Try a different USB port. If the card is formatted with an unsupported file system (e.g., exFAT on older OS), reformat it to FAT32. Also check if the card's lock switch is not set to 'Lock'.
What is the transfer speed of this card reader?
The Sweex CR005V3-OEM uses USB 2.0, which supports data transfer rates up to 480 Mbps. Actual speed depends on the memory card's speed class.
Is the Sweex CR005V3-OEM compatible with Mac computers?
Yes, it is compatible with Mac OS X and macOS. No additional drivers are needed; it mounts as an external drive.
Can I connect the Sweex CR005V3-OEM to a USB hub?
It can be used with a self-powered USB hub. Avoid using it with an unpowered hub to ensure sufficient power for card detection.
How do I clean the Sweex CR005V3-OEM?
Disconnect the reader from the computer. Use a dry, soft cloth to wipe the exterior. Do not use water, solvents, or abrasive cleaners. Avoid getting moisture into the card slots.
What should I do if the reader stops working?
First, try connecting it to a different USB port or computer. If it still fails, the device may be defective. Check the warranty status; if under warranty, contact Sweex support for replacement.

User questions about CR005V3-OEM SWEEX

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Memory reader in PDF format for free! Find your manual CR005V3-OEM - SWEEX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CR005V3-OEM by SWEEX.

USER MANUAL CR005V3-OEM SWEEX

CR005V3 Sweex Internal Card Reader All-in-1 USB 2.0 Black

Introduction

  • Do not expose the Sweex Internal Card Reader All-in-1 USB 2.0 to extreme temperatures. Do not place the device in direct sunlight or in the direct vicinity of heating elements.
  • Do not use the Sweex Internal Card Reader All-in-1 USB 2.0 in extremely dusty or moist surroundings.
  • Protect the device against powerful shocks or jolts — they may damage the internal electronics.

Connecting the Sweex Card Reader

  1. Ensure the computer is switched off and disconnected from the mains.
  2. Open the computer casing and connect the cable to the 9-pin USB connection on your motherboard.
  3. Close the computer casing and restart the computer.
  4. Windows will automatically install the Sweex Card Reader. You can access the cards in the Sweex Card Reader via "My computer".

Warranty

All Sweex products are warranted for three years. We do not grant support or warranties for any software and/or (rechargeable) batteries included. Settlement of guarantee only takes place via the dealer where you have purchased the product in question.

The rightful owner has and retains title to all brand names and related rights mentioned in this manual.

Table of contents Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : SWEEX

Model : CR005V3-OEM

Category : Memory reader