29358 - Receiver C2G - Free user manual and instructions

Brand	C2G
Model	29358
Product Type	Wireless HDMI Receiver
Dimensions (L x W x H)	2.6 x 1.8 x 0.5 in (6.6 x 4.6 x 1.3 cm)
Weight	1.8 oz (50 g)
Power Source	USB 5V/1A (power adapter included)
Input	Wireless HDMI signal (2.4/5 GHz)
Output	HDMI Type A (female)
Supported Resolutions	Up to 1080p @ 60Hz
Wireless Range	Up to 30 m (line-of-sight)
Audio Support	Stereo, Dolby Digital, DTS
Compliance	HDCP 1.4/2.2
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-4°F to 140°F (-20°C to 60°C)
Humidity	10% to 85% (non-condensing)
Package Contents	Receiver unit, USB power cable, HDMI cable, quick start guide
Warranty	1 year limited
Cleaning Instructions	Wipe with a dry, soft cloth; avoid liquids
Repairability	Not user-serviceable; refer to manufacturer

Frequently Asked Questions - 29358 C2G

How do I set up the C2G 29358 wireless HDMI receiver?

Connect the receiver to your display via HDMI and power it via USB. Pair it with the transmitter (sold separately) by pressing the pairing button on both devices. The LED will indicate a successful connection.

What is the maximum range of the device?

The C2G 29358 has a wireless range of up to 30 meters (100 feet) in open line-of-sight conditions. Walls and obstructions may reduce the effective range.

Does it support 4K resolution?

No, this model supports resolutions up to 1080p at 60Hz. For 4K support, consider the C2G 29359 or higher models.

Can I use this receiver with any transmitter?

It is designed to work with C2G transmitters of the same series, particularly model 29357. Compatibility with other brands is not guaranteed.

What audio formats are supported?

The receiver supports stereo PCM, as well as compressed formats like Dolby Digital and DTS. Bitstream passthrough is enabled.

How do I reset the receiver?

To reset, use a paperclip to press and hold the reset button (located near the HDMI port) for 5 seconds. The receiver will restart and clear any stored pairing.

Does it require an internet connection?

No, the C2G 29358 uses direct wireless communication and does not require an internet connection or router.

Why is there no video output?

Ensure the receiver is powered and the HDMI connection is secure. Check that the transmitter is paired and within range. Also verify that the source device is outputting a supported resolution (1080p or lower).

Can I clean the device with water?

No, use only a dry, soft cloth to clean the receiver. Avoid liquids or abrasive cleaners to prevent damage.

What is the warranty period?

The C2G 29358 comes with a 1-year limited warranty against defects in materials and workmanship. Contact C2G support for warranty claims.

USER MANUAL 29358 C2G

Package Contents	2
System Requirements	2
Device Installation	3
Technical Specifications	5
Important Safety Information	7
C2GTM Warranty	8

— Wireless Audio/Video Receiver
- USB Power Cable
- User Manual

System Requirements:

• Miracast™ enabled device. Such as an Android smartphone using OS 4.1.2
• USB port on display to power the device
• Display with HDMI input(s)

*Note: If the TV does not have a USB port for power, use an AC to USB power adapter to power the Wireless Audio/Video Receiver

Step 1: Make sure the display is powered OFF.

Step 2: Connect a High Speed HDMI cable from the Wireless Audio/Video Receiver to an available HDMI input on the TV.

Step 3: Connect USB Power cable from the Wireless Audio/Video Receiver (USB Micro) to an available USB A port on the display. An AC to USB adapter may also be used for power.

Step 4: Power on the display and select the correct HDMI input that the Wireless Audio/Video Receiver is connected to.

Pairing the Smartphone to the Miracast™ Receiver:

*Note: Ensure that the smartphone is using Android OS version 4.1.2 or above and supports the Miracast™ or equivalent technology function.

Step 1: Go to "Settings" on the smartphone.

Step 2: Then choose "More Settings".

Pairing the Smartphone to the Miracast™ Receiver:

Step 3: Select "AllShare Cast".

*Note: "AllShare Cast" is for Samsung products only. Other brands use different names for this Miracast™ function. Please consult the devices User Manual for further instructions.

Step 4: Find and select the device "AV Receiver"

Step 5: Press the pair button on the side of the Wireless Audio/Video Receiver.

Step 6: Once the pairing is complete, the image of the smartphone will be displayed on the TV.

*Note: If the pairing was not successful ensure that all cables are connected properly and repeat Steps 1-5.

*Note: The effective range is 30ft (line of sight), if the WiFi signal is too crowded, the distance and quality of the picture may decrease.

WiFi Standard	1T2R (1x2) (IEEE 802.11n WLAN)
Channel Bandwidth	2.4GHz
RF Power	Output: 10dBm max / Receive level - 10dBm min
Distance	Max. 30ft line of sight (no walls)
Transmission Delay	Max 0.5 sec Latency
Antenna Diversity	Dual PCB Antenna for WiFi

WiFi Standard	1T2R (1x2) (IEEE 802.11n WLAN)
Largeur de bande du canal	2.4GHz
Puissance RF	Output: 10dBm max / Receive level - 10dBm min
Distance	Max. 30ft line of sight (no walls)
Délai de transmission	Max 0.5 sec Latency
Diversité d'antenne	Double PCB antenne pour le WiFi

Media Processor	MiracastTM use H.264 compressing
Resolution	Max 1080p/30Hz or 1080i/60Hz
Wireless	Wireless Display: MiracastTM / WiDi
Output	HDMI Type A 19-pin Female
HDMI Standard	HDMI 1.3a, 165MHz / HDCP 2.0
Powered: Micro USB	DC Input 5V (<2.5W USB powered)

Processeur multimédia	MiracastTM use H.264 compressing
Résolution	Max 1080p/30Hz or 1080i/60Hz
Sans fil	Wireless Display: MiracastTM / WiDi
Sortie	HDMI Type A 19-pin Female
Standard HDMI	HDMI 1.3a, 165MHz / HDCP 2.0
Alimentation : USB micro	DC Input 5V (<2.5W USB powered)

Procesador de medios	MiracastTM use H.264 compressing
Resolución	Max 1080p/30Hz or 1080i/60Hz
Inalámbrico	Wireless Display: MiracastTM / WiDi
Salida	HDMI Type A 19-pin Female
Conformidad con norma HDMI	HDMI 1.3a, 165MHz / HDCP 2.0
Suministro de potencia: micro USB	DC Input 5V (<2.5W USB powered)

Do not plug the unit in any outlet that does not have enough current to allow the device to function. Refer to the specifications in this manual for power level of the unit.

Liquid: If this unit or its corresponding power adapter has had liquid spilled on or in it, do not attempt to use the unit. Do not attempt to use this product in an outdoor environment as elements such as rain, snow, hail, etc. can damage the product.

In case of a storm, it is recommended that you unplug this device from the outlet.

Avoid placing this product next to objects that produce heat such as portable heaters, space heaters, or heating ducts.

THERE ARE NO USER SERVICEABLE PARTS. Do not attempt to open this product and expose the internal circuitry. If you feel that the product is defective, unplug the unit and refer to the warranty information section of this manual.

At C2G, we want you to be totally confident in your purchase. That is why we offer a warranty on this device. If you experience problems due to workmanship or material defect for the duration of this warranty, we will repair or replace this device. To request a Return Merchandise Authorization (RMA) number, contact customer service at 800-506-9607 or www.c2g.com.

For more information on this product or to check for updated drivers, manuals or frequently asked questions please visit our website.