CS64 - Styler Conair - Free user manual and instructions

Product Type	Hair Styler
Brand	Conair
Model	CS64
Color	Black/Silver
Plate Material	Ceramic
Plate Size	1 inch (2.5 cm)
Heating Technology	Ionic conditioning
Temperature Settings	Adjustable up to 450°F (230°C)
Heat-Up Time	60 seconds
Auto Shut-Off	Yes, after 60 minutes
Swivel Cord	Yes, 8 feet (2.4 m)
Voltage	110-120V
Power Consumption	65 watts
Dimensions (L x W x H)	12 x 2 x 1.5 inches (30 x 5 x 4 cm)
Weight	0.8 lb (360 g)
Main Features	Ionic technology, fast heat-up, ceramic plates for smooth gliding
Care Instructions	Wipe plates with damp cloth after use; store in heat-resistant pouch
Safety Features	Auto shut-off, heat-resistant stand, cool tip
Spare Parts Available	Replacement cords, plates (contact Conair support)
General Information	Ideal for straightening and styling; suitable for all hair types

Frequently Asked Questions - CS64 Conair

How do I clean the Conair CS64 styler?

Unplug the device and let it cool completely. Wipe the plates with a damp cloth. Do not use abrasive cleaners.

What is the maximum temperature of the CS64?

The maximum temperature is 450°F (230°C), adjustable via the dial.

Does the styler have an auto shut-off feature?

Yes, it automatically shuts off after 60 minutes of inactivity for safety.

Can I use the CS64 on wet hair?

No, it is designed for dry hair. Using on wet hair can cause damage.

How long does it take to heat up?

It reaches the set temperature in about 60 seconds.

What type of plates does the CS64 have?

It features ceramic plates with ionic conditioning for smooth styling.

Is the cord swivel?

Yes, the 8-foot cord swivels to prevent tangling.

What voltage does the CS64 use?

It operates on 110-120V. Do not use with a voltage converter unless specified.

Can I replace the cord if damaged?

Contact Conair support for replacement parts. Do not attempt to repair yourself.

Does the styler come with a storage case?

Yes, it includes a heat-resistant pouch for safe storage.

USER MANUAL CS64 Conair

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING KEEP AWAY FROM WATER

DANGER

DANGER—Any appliance is electrically live even when the switch is off. To reduce the risk of death by electric shock:

1. Always unplug appliance immediately after using.

2. Do not use while bathing or in a shower.

3. Do not place or store appliance where it can fall or be pulled into a tub or sink.

4. Do not place in, or drop into, water or other liquid.

5. If an appliance falls into water, unplug it immediately. Do not reach into the water.

WARNING

WARNING — To reduce the risk of

1. This appliance should never be left unattended when plugged in.

2. Do not pull, twist, or wrap line cord around appliance.

3. This appliance should not be used by, on or near children or individuals with certain disabilities.

4. Use this appliance only for its intended use, as described in this manual. Do not use attachments not recommended by the manufacturer.

5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly or if it has been dropped or damaged, or dropped into water. Return the appliance to an authorized service center for examination and repair.

6. Keep the cord away from heated surfaces.

7. Never use while sleeping.

8. Never drop or insert any object into any opening or hose.

9. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.

10. Unit is hot when in use. Do not let eyes or bare skin touch healed surfaces.

11. Do not place the heated unit directly on any surface or on the appliance cord while it is hot or plugged in.

12. Never block the air openings of the appliance or place on a soft surface, such as a bed, couch, or towel, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like. Unplug before storing.

13. Do not use an extension cord with this appliance.

14. Do not touch hot surfaces of the appliance. Use handles or knobs.

15. Before plugging in read the information about dual voltage contained in the instruction section of this manual.

16. Do not attempt to touch the housing of your appliance near the straightening plates as it is hot when in use.

17. Do not use with a voltage converter.

SAVE THESE INSTRUCTIONS

OPERATING INSTRUCTIONS

This straightening iron is intended for household use. This unit is designed to operate at 120/240 volts AC. Use on Alternating Current (50/60 hertz) only.

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.

DUAL VOLTAGE

This straightening iron will automatically adjust to the proper voltage. Use an adapter plug with correct configuration, prior to use in outlet.

TO STRAIGHTEN HAIR

Hair should be clean and completely dried before using the straightening iron. Plug the iron into an electrical outlet. Turn on unit. The power indicator light should become illuminated. Allow unit to heat up for several minutes.

WARNING: The straightening iron's plates will gel very hot within a few seconds and should not be placed in contact with the skin after the straightening iron has been turned on.

GETTING STARTED

The straightening iron's 3 high heat temperature settings and Instant Heat technology combine to provide styling versatility for all hair textures. If you have 'I' ne hair, a low temperature will provide the best results. If you have thick, wavy or hard-to-straighten hair, keep the heat setting high. You can vary the straightening iron's temperature according to your particular need!

STRAIGHTENING BASICS

1. Plug the straightening iron cord into any household outlet (120/240V, red light to go on). Press ON button. The iron will heat up very quickly. The red indicator light will stop blinking and remain on when the iron is ready to use. To turn off, press OFF button (red light will go off), Never leave your straightening iron on and unattended. However, should you fail to turn the unit off, it will shut itself off automatically within 72 minutes.

2. Start with a hair section that is 2" wide and no more than 1/2" thick. Open the iron and place a hair section between the two hot plates, close to the scalp. Trap hair between the plates by it mily squeezing the handles together. While maintaining the tension, slowly pull the unit down along the hair section toward the end of hair. For best results, use a light styling lotion before blow-drying hair. At the end of hair section, release the pressure on the handle and allow the hair section to slide out. Repeat process on additional sections of hair until you achieve the hair style you desire. It may be necessary to repeal process on certain areas, depending on the texture of your hair.

Some experience is necessary when learning to use this straightening iron. After using iron several times, you will learn the ideal way to straighten and style your hair easily.

STYLING WITH EASY-GLIDE TITANIUM-

TOURMALINE CERAMIC COATED PLATES The plates of this premium straightening iron are coated with a combination of the best materials for styling. A fusion of titanium, tourmaline and ceramic evenly distributes heat to gently style and protect hair from damaging hot spots. When heated, tourmaline naturally emits clouds of negatively charged ions that eliminate flyaways and frizzles and leave hair silky smooth and shiny.

Hair glides easily over the surface of these ultra smooth plates. As you straighten each strand, you'll achieve a salon-perfect finish.

Plates are exceptionally easy to clean, and you'll discover this combination of technologies leaves your hair silky smooth.

Temperature Setting Guide

Temp. Setting Hair Type

Low Delicate, thin, easy-to-straighten hair

Medium Average to trick or tinned hair

High Ticks, wavy or hard-to-straighter hair

USING INSTANT HEAT, THE 3 HIGH HEAT TEMPERATURE SETTINGS AND UNIFORM HEAT RECOVERY SYSTEM

This straightening iron features Conair's Instant Heat technology.

Within this Instant Heat technology there are 3 temperature settings for every type of hair, from the fi nast to the curliest and most resistant. Select the temperature range that's suitable for your hair type to help you create the look you want.

And that's not all. Conair's professional salon standards of engineering provide you with a Uniform Heat Recovery System that maintains the straightening iron at a constant temperature.

There is a constant surge of power to ensure that heat is continuously delivered for optimal styling results, unlike other units which lose heat during use. This provides consistent styling power so that every strand of your hair is set with the same level of heat and comes out the same way for a perfect fi nish.

REMOVABLE SILICONE DEEP SHINE ATTACHMENT

Your straightening iron includes a removable silicone deep shine attachment. This attachment will help to provide tension and guide your hair as you use the straightening iron. It also eliminates any gaps, creating silky, smooth strands with extra shine. To remove or attach the silicone strip, turn unit off and allow unit to cool. Hold unit if merely with one hand; with your other hand, slide silicone strip away from the iron to detach it. When attaching the silicone strip, align it with the slot on the side of the iron and slide silicone strip into position. Make sure the silicone strip securely locks into position.

GET TO KNOW YOUR STRAIGHTENING IRON

"With will not reach stable or temperatures within 30 seconds.

USER MAINTENANCE

Your straightening iron is virtually maintenance-free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, allow to cool, and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer.

CAUTION

NEVER allow the power supply cord to be pulled, twisted, or severely bent. Never wrap the cord lightly around the appliance. Damage will occur at the high tip point of entry into the appliance, causing it to rupture and short circuit. Inspect the cord frequently for damage. Stop use immediately if damage is visible or if unit stops or operates intermittently.

STORAGE

When not in use, your appliance is easy to store. Allow appliance to cool, then simply put back in the box and store out of reach of children in a safe, dry location. Do not jerk or strain cord at plug connections.

WARNING:

IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF YOU'RE WRONG.

KEEP AWAY FROM WATER

Everyone knows that electricity and water are a dangerous combination. But did you know that an electric appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.

ALWAYS UNPLUG

SMALL APPLIANCES

LIMITED TWO YEAR WARRANTY

Conair will repair or replace (at our option) your unit free of charge for 24 months from the date of purchase if the appliance is defective in workmanship or materials.

To obtain service under this warranty, return the defective product to the service center listed below, together with your purchase receipt and \$5.00 for postage and handling. California residents need only provide proof of purchase and should call 1-800-3-CONAR for shipping instructions. In the absence of a purchase receipt, the warranty period shall be 24 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 24 MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER.

This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state.

SERVICE CENTER

CONAIR CORPORATION

Service Department

7475 N. Glen Harbor Glendale, AZ 85307

©2009 CONAIR CORPORATION

08NP10404

ProShine

titanium & tourmaline ceramic

For your safety and continued enjoyment of this product, always read the instruction book carefully before using

Model CS64