DGUN-2500 - Console DREAMGEAR - Free user manual and instructions

Product Type	Retro Game Console
Brand	dreamGEAR
Model	DGUN-2500
Dimensions	6.3 x 3.5 x 1.2 inches (16 x 9 x 3 cm)
Weight	8.5 ounces (240 g)
Power Supply	USB-C 5V/2A
Battery	2000mAh Li-ion rechargeable
Display	3.5 inch TFT LCD (320x240 pixels)
Processor	ARM Cortex-A7 1.2 GHz
Memory	64 MB RAM, 128 MB storage
Game Library	Pre-loaded with 250 classic games
Connectivity	AV out, headphone jack, USB-C
Main Functions	Play retro games, save/load states, screen brightness adjustment
Maintenance	Clean with dry cloth; avoid moisture
Safety	Keep away from water; do not disassemble
Spare Parts	Replacement battery, USB cables available
Repairability	User-replaceable battery; screwdriver required
General Information	Compatible with external controllers via USB

Frequently Asked Questions - DGUN-2500 DREAMGEAR

How do I turn on the DGUN-2500?

Press and hold the Power button located on the top of the console for 3 seconds until the screen lights up.

Can I add more games to the console?

The DGUN-2500 does not support game addition via SD card. It comes with 250 pre-loaded classic games.

How do I connect the console to a TV?

Use the included AV cable to connect the console's AV port to your TV's composite input. Then switch the TV to the correct input channel.

What should I do if the console won't charge?

Ensure you are using a USB-C cable and a 5V/2A power adapter. If it still doesn't charge, try a different cable and check the charging port for debris.

How do I save my game progress?

The console supports save states. During gameplay, press the Menu button and select 'Save State' to save your current position. You can reload it later from the same menu.

The screen is too dark/bright. How do I adjust?

Press the Brightness button (sun icon) on the bottom of the console to cycle through brightness levels.

Can I use an external controller?

Yes, the DGUN-2500 has a USB-C port that supports external controllers. Connect a compatible USB gamepad via an OTG adapter (not included).

My console is not turning on. What can I do?

First, charge the console for at least 30 minutes. If it still does not turn on, try a hard reset by inserting a pin into the reset hole on the back for 5 seconds.

How do I clean the console?

Use a soft, dry microfiber cloth to wipe the screen and body. Do not use liquids or abrasive cleaners.

Is the battery replaceable?

Yes, the battery is user-replaceable. You can purchase a replacement battery from dreamGEAR's website. Use a small screwdriver to open the back cover and disconnect the old battery.

USER MANUAL DGUN-2500 DREAMGEAR

Product photo of white gaming devices including a monitor, controller, and keyboard (no visible text or symbols)

PACKAGE CONTENTS:

- Console w/ AV cable

- Two (2) Remotes

• Two (2) Remote Holsters

- Two (2) Table Tennis attachments

• Controller attachment

• Baseball Bat attachment

• Golf Club attachment

• Tennis Racket attachment

- Soccer attachment

- Boxing attachments

- User's Guide/Warranty Card

- Registration Card

MATERIALS NEEDED:

• Each controller needs 3 "AAA" batteries (6 total)

- Console needs 3 "AA" batteries

- Mini-screwdriver

HOW TO SET UP WIRELESS MOTION CONTROL PLUG 'N PLAY CONSOLE AND REMOTES

1. Set up the Wireless Motion Control Plug 'n Play Console on a flat surface near your television.

NOTE: You need to be directly in front of the Console during gameplay. You must be within 5-8 feet in front of the Console during gameplay.

1. Remove battery compartment cover located on the bottom of the console (mini-screwdriver is needed).

2. Insert 3 "AA" batteries and replace battery compartment cover.

3. Plug the AV cables from the console into your AV ports on your television.

NOTE: Make sure the yellow and red plugs are properly and securely inserted into the correct ports on your television.

NOTE: Make sure that your TV is on the proper channel.

1. Remove battery compartment cover located on the back of the remote (mini-screwdriver is needed).

2. Insert 3 "AAA" batteries and replace the battery compartment cover.

NOTE: To use the other Remote for 2 player games or games that require both Remotes, repeat Steps 5 and 6 for other Remote.

1. To turn on console, press the Power button located on the top of the console.

2. To reset the console at any point, press the Reset button located on the top of the console. When the Reset button is pressed, it will bring you back to the Main Menu.

HOW TO INSERT/REMOVE ATTACHMENTS ONTO THE REMOTES

1. Insert the bottom of the attachment to the top of the remote (hole located near the directional buttons).
2. You will hear a click once the attachment is secured.
3. Insert the remote (with attachment) into the remote holster.
   NOTE: There is a plastic pin that holds the remote and attachment from accidentally coming out of the remote holster during gameplay. When inserting the remote into the remote holster, place the plastic pin into the hole on the back of the remote.
4. To remove, pull the remote (with attachment) from the remote holster. Press the buttons on each side of the remote and pull the attachment out.

TROUBLESHOOTING

Problem: The LEDs on my remote don't light up.

Solution: Make sure that you have fresh batteries and they are properly and securely inserted into the remote. Make sure that the battery compartment cover is properly closed and locked into place.

Problem: The Console doesn't turn ON.

Solution: Make sure that you have fresh batteries and they are properly and securely inserted into the console. Make sure that the battery compartment cover is properly closed and locked into place. Make sure that the battery compartment area is free from debris. Make sure that none of the battery contacts are damaged or compromised.

Problem: The games won't show up on my TV screen.

Solution: Make sure that the AV cable is properly and securely plugged into the TV. Make sure that the TV is on the proper channel (the channel should match the setting on where the plugs are plugged into). Make sure that the AV cable is free from debris. Make sure that none of the AV cable contacts on both ends are damaged or compromised.

FOR TECHNICAL SUPPORT PLEASE CONTACT: 1-877-999-DREAM or [e-mail]