TX1080 - Video projector OPTOMA - Free user manual and instructions

Product Type	Video Projector
Brand	Optoma
Model	TX1080
Display Technology	DLP
Native Resolution	1920 x 1080 (Full HD)
Brightness	3200 Lumens
Contrast Ratio	20,000:1
Lamp Life (Normal/Eco)	4000 / 6000 hours
Throw Ratio	1.5 - 1.8:1
Zoom Ratio	1.2x
Keystone Correction	±40° Vertical
Aspect Ratio	16:9
Input Ports	HDMI (x2), VGA, Composite, S-Video, USB
Audio Output	3.5mm Jack, 10W Speaker
Dimensions (W x D x H)	315 x 224 x 98 mm
Weight	2.9 kg
Power Consumption	250W (Normal), ≤0.5W (Standby)
Noise Level (Normal/Eco)	32 dB / 28 dB
Lamp Type	Osram P-VIP 190W
3D Support	Yes (DLP Link)
Menu Languages	Multi-language
Safety Features	Auto-off, Security Bar, Kensington Lock
Cleaning Instructions	Wipe exterior with dry cloth; clean filter every 100 hours
Repairability	Replaceable lamp and filter; user accessible

Frequently Asked Questions - TX1080 OPTOMA

What is the native resolution of the Optoma TX1080?

The Optoma TX1080 has a native resolution of 1920 x 1080 (Full HD), providing sharp and detailed images.

How do I connect external devices to the TX1080?

You can connect devices via HDMI, VGA, Composite, or S-Video ports. For audio, use the 3.5mm jack or the built-in speaker.

What is the lamp life and how do I replace it?

The lamp lasts up to 4000 hours in normal mode and 6000 hours in eco mode. Replacement instructions are in the manual; ensure the projector is cool and unplugged.

How do I clean the projector's filter?

Clean the air filter every 100 hours of use. Remove the filter cover, gently vacuum or wash with mild soap, dry completely, and reinstall.

Can I use the TX1080 for 3D content?

Yes, it supports DLP Link 3D. You need compatible 3D glasses and a 3D source.

What should I do if the projector does not turn on?

Check the power cable, ensure the lamp is properly installed, and verify the lamp door is closed. If the LED indicator flashes, refer to the manual.

How do I adjust the image size and focus?

Use the zoom ring to adjust size and the focus ring to sharpen the image. For keystone distortion, use the keystone correction in the menu.

What are the recommended ambient temperatures?

Operate between 5°C and 40°C. Ensure proper ventilation and avoid direct sunlight.

How do I reset the lamp hour counter?

After replacing the lamp, go to the menu under 'Setup' and select 'Lamp Reset'. Confirm to reset the counter.

Where can I download the user manual?

The manual is available for free on notice-facile.com. Select your language and download the PDF.

USER MANUAL TX1080 OPTOMA

Safety Information 2
Precautions....3
Eye Safety Warnings ....5

+ Introduction....6

Product Features 6
Package Overview....7
Product Overview 8

Main Unit 8
Control Panel 9
Connection Ports 10
Remote Control 11

+ Installation 12

Connecting the Projector ....12
Powering On/Off the Projector....14

Powering On the Projector 14
Powering Off the projector 15
Warning Indicator 15

Adjusting the Projected Image....16

Adjusting the Projector's Height 16
Adjusting the Projector's Zoom / Focus 17
Adjusting Projection Image Size 17

+User Controls 18

Control Panel & Remote Control 18
On-screen Display Menus 21

How to operate 21

Menu Tree 22
Image 23
Display 27
Setup....32
Options.... 40

Appendices....45

Troubleshooting 45

Image Problems 45
Projector Status Indication 48
Remote Control Problems 49

Replacing the Lamp....50

Compatibility Modes ....51
RS232 Commands and Protocol Function List....52
Ceiling Mount Installation 56
Optoma Global Offices 57
Regulation & Safety Notices ....59

Safety Information

	The lightning flash with arrow head within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
	The exclamation point within an equilateral triangle is intended to alert the user to the presence of import operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Important Safety Instruction

1. Do not block any ventilation openings. To ensure reliable operation of the projector and to protect from over heating, it is recommended to install the projector in a location that does not block ventilation. As an example, do not place the projector on a crowded coffee table, sofa, bed, etc. Do not put the projector in an enclosure such as a book case or a cabinet that restricts air flow.
2. Do not use the projector near water or moisture. To reduce the risk of fire and/or electric shock, do not expose the projector to rain or moisture.
3. Do not install near heat sources such as radiators, heaters, stoves or any other apparatus such as amplifiers that emits heat.
4. Clean only with dry cloth.
5. Only use attachments/accessories specified by the manufacturer.
6. Do not use the unit if it has been physically damaged or abused. Physical damage/abuse would be (but not limited to):
   Unit has been dropped.
   ■ Power supply cord or plug has been damaged.
   ■ Liquid has been spilled on to the projector.
   ■ Projector has been exposed to rain or moisture.
   ■ Something has fallen in the projector or something is loose inside.
   Do not attempt to service the unit yourself. Opening or removing covers may expose you to dangerous voltages or other hazards. Pl. call Optoma before you send the unit for repair.
7. Do not let objects or liquids enter the projector. They may touch dangerous voltage points and short out parts that could result in fire or electric shock.
8. See projector enclosure for safety related markings.
9. The unit should only be repaired by appropriate service personnel.

Precautions

Please follow all warnings, precautions and maintenance as recommended in this user's guide.

Warning-
Do not look into the projector's lens when the lamp is on. The bright light may hurt your eyes.
Warning-
To reduce the risk of fire or electric shock, do not expose this projector to rain or moisture.
Warning-
Please do not open or disassemble the projector as this may cause electric shock.
Warning-
When replacing the lamp, please allow the unit to cool down. Follow instructions as described on page 50.
Warning-
This projector will detect the life of the lamp itself. Please be sure to change the lamp when it shows warning messages.
Warning-
Reset the “Lamp Reset” function from the on-screen display “Options | Lamp Settings” menu after replacing the lamp module (refer to page 43).
Warning-
When switching the projector off, please ensure the cooling cycle has been completed before disconnecting power. Allow 90 seconds for the projector to cool down.
Warning-
Do not use lens cap when projector is in operation.
Warning-

When the lamp reaches the end of its life, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under "Replacing the Lamp" section on page 50.

When the lamp is approaching to the end of its life time, the message “Replacement suggested” will show on the screen. Please contact your local reseller or service center to change the lamp as soon as possible.

Usage Notice

Do:

■ Turn off and unplug the power plug from the AC outlet before cleaning the product.
■ Use a soft cloth moistened with mild detergent to clean the display housing.
■ Disconnect the power plug from AC outlet if the product is not being used for a long period of time.

Do not:

■ Block the slots and openings on the unit provided for ventilation.
■ Use abrasive cleaners, waxes or solvents to clean the unit.
■ Use under the following conditions:

- In extremely hot, cold or humid environments.

▶ Ensure that the ambient room temperature is within 5 - 35°C
▶ Relative Humidity is 5 - 35°C, 80% (Max.), non-condensing
- In areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic field.
- In direct sunlight.

Eye Safety Warnings

Symbolic illustration of a computer monitor with a red X mark and eye inside, enclosed in an oval (no text or numbers present)

Avoid staring/facing directly into the projector beam at all times. Keep your back to the beam as much as possible.
A stick or laser pointer is recommended to avoid the need for the user to enter the beam.
When projector is used in a classroom, adequately supervise students when they are asked to point out something on the screen.
In order to minimize the lamp power, use room blinds to reduce ambient light levels.

Product Features

This product is a 1080p single chip 0.95" DLP® projector.

■ Native 16:9 1080p DLP® Technology
■ Video Compatibility:
■ 480i-NTSC, NTSC4.43
- 576i-PAL/PAL-M/PAL-N/SECAM
- SDTV compatible (480i/p, 576i/p)
- HDTV compatible (720p, 1080i/p)
- RGB signal: UXGA+, SWXGA+, SXGA+, SXGA, WXGA, HD, XGA, SVGA and VGA re-sizing

Macintosh compatible

■ Full function IR remote control with laser pointer and mouse control

■ Advanced vertical digital keystone correction and high quality full screen image re-scaling

■ Audio input x 5 (For DVI-D / VGA1 / VGA2 / S-Video+ Video(RCA) / HDMI)

■ Built-in two speakers with 2 Watt amplifier

■ User friendly control panel and multilingual on screen menu

■ HDMI & DVI support HDCP function

■ Support Network function

Introduction

Package Overview

Unpack and inspect the box contents to ensure all parts listed below are in the box. If something is missing, please contact Optoma customer service.

Illustration of a projector device with a handle and spout (no text or symbols)

Projector with lens cap

Power Cord 1.8m

Pure electrical circuit lines without any symbols

VGA Cable 1.8m

Due to different applications in each Country, some regions may have different accessories.

Coiled network of two USB connectors with a white strap (no text or symbols visible)

Remote ControllerRS232 Cab

2 x AA Batteries

Documentation :

User's Manual
√ Warranty Card
Quick Start Card
WEEE Card