MC3 LITE - Microphone Synco - Free user manual and instructions

Type	Condenser Microphone
Polar Pattern	Cardioid
Frequency Response	20 Hz – 20 kHz
Sensitivity	-42 dB ±3 dB (1 kHz, 1 Pa)
Impedance	200 Ω
Signal-to-Noise Ratio	78 dB
Power Supply	Plug-in power (2.5–5V) via 3.5mm TRS
Connector	3.5 mm TRS (gold-plated)
Dimensions (Length × Diameter)	150 mm × 20 mm
Weight	80 g
Housing Material	Zinc alloy
Included Accessories	Furry windscreen, foam windscreen, shock mount, clip, 3.5mm to XLR adapter
Maintenance	Clean grille with soft brush; wipe body with dry cloth
Safety Precautions	Avoid moisture, extreme temperatures, and dropping
Warranty	1 year limited

Frequently Asked Questions - MC3 LITE Synco

What type of microphone is the Synco MC3 LITE?

The Synco MC3 LITE is a condenser microphone with a cardioid polar pattern, ideal for capturing sound directly in front of the mic while rejecting ambient noise.

What devices are compatible with the MC3 LITE?

It works with devices that have a 3.5mm TRS microphone input and provide plug-in power, such as DSLRs, smartphones (via adapter), camcorders, and portable recorders.

Does the MC3 LITE require batteries?

No, it is powered by plug-in power (2.5–5V) from the connected device, so no external batteries are needed.

How do I connect the MC3 LITE to an XLR input?

The included 3.5mm to XLR adapter allows connection to professional audio equipment. Note that phantom power is not required for the microphone itself, but the adapter may pass phantom power harmlessly.

How to reduce wind noise?

Use the furry windscreen for outdoor use or the foam windscreen indoors. The shock mount also helps minimize handling noise.

Can I use the MC3 LITE for podcasting or voiceovers?

Yes, its cardioid pattern and clean sound quality make it suitable for podcasts, voiceovers, and YouTube videos when used with a proper interface or recorder.

What is the optimal working distance?

For best results, position the microphone 15–30 cm (6–12 inches) from the sound source. Adjust gain on your device accordingly.

How to clean the microphone?

Gently brush the grille with a soft brush to remove dust. Wipe the body with a dry, lint-free cloth. Avoid using liquids or compressed air.

Is the MC3 LITE compatible with smartphones?

Yes, but many smartphones require a TRRS adapter or a specialized cable (e.g., for iPhone a Lightning adapter). Check your phone's compatibility with external microphones.

What does the warranty cover?

The 1-year limited warranty covers manufacturing defects. It does not cover damage from misuse, modification, or normal wear.

USER MANUAL MC3 LITE Synco

MC3-LITE 4-Channel Ultra-compact Audio Mixer User Manual

Thank you for choosing SYNCO product.

Please read this manual carefully before use and follow all instructions

mentioned herein.

Caring For Your SYNCO Product Product Introduction

• Please keep the product in a dry, clean, dust-free environment.
• Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage.
• Use only a soft and dry cloth for cleaning the product.
  ● Malfunction may be caused by dropping, impact of external force
• Do not attempt to disassemble the product. Doing so voids warranty.
• Please have the product checked or repaired by authorized technicians if any malfunctions happened.
  ● Failure to follow all the instructions may result in mechanics damage.
  ● Warranty does not apply to human errors.

Package List

MC3-LITE Audio Mixer x1

3.5mm TRS to TRRS cable x2

Charging Cable x1

① Power Button & Power Indicator

Press to turn on/off the system.

When the system is on, the indicator stays on yellow.

② Wireless Connection Button & Wireless Control Indicator

Press the button, turn to Bluetooth interface on your phone and find "MC3-LITE" for connection.

The indicator stays on blue when the function is on.

③ Low Battery Indicator

When the battery is running low, the indicator would stay on red.

小

④ Charging Indicator

The indicator stays on green during charging procedure and is off once charging is fulfilled.

山

⑤ Stepless Gain Control Dial

Separate gain control dial is provided for each output port.

⑥ Monitoring/Output Switch

Switch the 3.5mm jack to Monitoring or Output as needed.

⑦ 3.5mm Output Jack

To connect with mobile devices.

⑧ 3.5mm Output/Monitoring Jack

Depending on the Monitoring/Output Switch, this jack can be switched between output or monitoring. Headphones can be plugged into this interface for monitoring.

⑨ Type-C Charging Port

For charging the MC3-LITE via the included charging cable; charging while recording is available.

⑩ 3.5mm Line-in Jack

To connect with a media player or other audio device.

⑪ 3.5mm Mic-in Jack

To connect with microphone; Stereo input supported.

Specifications

	3.5mm Line-In
Input Jack	3.5mm Mic-InWireless Connection Input
Output Jack	3.5mm Stereo Output
Audio Distortion	<0.1%
Frequency Response	20Hz-20KHz
SNR	>95dB

Gain Control	-15~15dB
Input Voltage / Currency	5V/500mA
Monitoring Output Power	76mW
Monitoring Output Impedance	32Ω
Material	Metal
Weight	156g
Dimensions	87*65*34mm
Battery Life	4H
Battery Capacity	500mAh

Warranty

Warranty Period

Thank you for purchasing SYNCO products.

1. Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under normal use within 30 days upon receipt of the product.

2. Original SYNCO products are entitled to 12-month limited warranty service. The warranty period begins on the date of purchase of brand new, unused products by the first end-user. Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service and materials fee).

Warranty Exclusions and Limitations

Faults resulted from inappropriate use of a product without following its operation specification

● Artificial damage, e.g. crash, squeeze, scratch, or soaking
- Modifications to a product by its user or a third party without prior written consent of SYNCO, e.g. replacement of element or circuit, label alteration
- The code on product is inconsistent with that of warranty certificate, or the code on the product or warranty certificate is altered or torn off
● All consumable accessory attached to a product, like cable, wind muff, battery
● Faults as a result of force majeure, such as fire, flood, lightning, etc.

Warranty Claim Procedure

• If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can always contact SYNCO's customer service through email at support@ syncoaudio.com.
• Please retain your sales receipt and warranty certificate as proof of purchase. If any of these documents is missing, only sales return or chargeable service will be provided.
• If the SYNCO product is out of the warranty coverage, the service and the parts cost will be charged.

Guangzhou Zhiying Technology Co., Ltd

Block 15th, No.200 Fangcun Avenue East, Liwan District,
Guangzhou, China, 510000
[e-mail]
www.syncbaudio.com
https://www.facebook.com/syncomicrophones

WARRANTY CERTIFICATE
Please register your warranty. Meanwhile, you are welcomed to contact us via Email: [e-mail]
USER INFORMATION	Customer Name:
	Phone Number:
	Email:
	Address:
SALES INFORMATION	Sales Date:
	Model:
	Product Code:
	Dealer:
REPAIR RECORD	Service Date:
	Technician:
	Issue:
RESULT	Solved	Unsolved	Returned(Replaced)