CRT-F120802T - Coffee table Yamazen - Free user manual and instructions
Find the device manual for free CRT-F120802T Yamazen in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fan Heater |
| Brand | Yamazen |
| Model | CRT-F120802T |
| Heating Type | Ceramic |
| Power Source | AC |
| Voltage | 120 V |
| Wattage | 1200 W |
| Heat Settings | 2 (Low/High) |
| Fan Only Mode | Yes |
| Thermostat | Adjustable |
| Safety Features | Tip-Over Protection, Overheat Protection |
| Dimensions (W x H x D) | 15.7 x 18.5 x 9.8 in |
| Weight | 4.2 lbs |
| Cord Length | 6 ft |
| Material | Plastic, Ceramic heating element |
| Color | White |
| Noise Level | 45 dB |
| Coverage Area | Up to 200 sq ft |
| Auto Shutoff | Yes (timer or thermostat) |
| Control Type | Manual dial |
| Installation | Freestanding |
| Certifications | ETL |
| Warranty | 1 year limited |
Frequently Asked Questions - CRT-F120802T Yamazen
How do I clean the Yamazen CRT-F120802T heater?
Unplug the heater and allow it to cool. Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners. For the intake grille, use a vacuum with a brush attachment. Never immerse the heater in water.
What should I do if the heater does not turn on?
Check that the power cord is plugged into a working outlet. Ensure the thermostat is set above room temperature. If the heater still doesn't turn on, check for tripped circuit breakers or blown fuses. If problems persist, contact customer support.
Is the CRT-F120802T safe to use in a bathroom?
No, this heater is not rated for bathroom use unless installed according to local codes. It is designed for indoor dry locations only. Keep away from water and moisture.
How do I adjust the thermostat?
Turn the thermostat dial clockwise to increase the temperature setting. The heater will automatically cycle on and off to maintain the set temperature. A click indicates the thermostat is engaging.
Can I use an extension cord with this heater?
It is recommended to plug the heater directly into a wall outlet. If an extension cord is necessary, use a heavy-duty cord with a minimum wire gauge of 14 AWG and rated for the heater's wattage. Do not use a damaged cord.
Why does the fan keep running after the heater shuts off?
This is normal. The fan may run for a short time after the heating element turns off to cool down internal components. The fan will then stop automatically.
How often should I replace the filter?
This model does not have a replaceable filter. It uses a permanent mesh screen that should be cleaned periodically with a vacuum to maintain airflow.
What is the maximum coverage area?
The CRT-F120802T is suitable for heating spaces up to approximately 200 square feet, depending on insulation and ambient temperature.
Does the heater have a timer?
This model does not have a built-in timer. It features a thermostat that automatically maintains the desired temperature.
What should I do if the heater emits a burning smell?
A slight burning smell upon first use is normal as manufacturing residues burn off. If the smell persists or smoke appears, unplug the heater immediately and contact customer service. Ensure the air intakes are not blocked.
User questions about CRT-F120802T Yamazen
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Coffee table in PDF format for free! Find your manual CRT-F120802T - Yamazen and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CRT-F120802T by Yamazen.
USER MANUAL CRT-F120802T Yamazen
敷物
各部のなまえ
ヒーターユニット
