TSS-76G - Speaker stand Taga Harmony - Free user manual and instructions

Product Type	Bookshelf Speaker
Model	TSS-76G
Brand	Taga Harmony
Dimensions (W x H x D)	200 mm x 320 mm x 250 mm
Weight	5.2 kg (per speaker)
Frequency Response	45 Hz - 20 kHz
Impedance	8 Ohms (nominal)
Sensitivity	87 dB (2.83V/1m)
Recommended Amplifier Power	20-100 Watts
Driver Configuration	2-way (1-inch tweeter, 6.5-inch woofer)
Enclosure Type	Bass reflex (ported)
Crossover Frequency	2.5 kHz
Finish Options	Black Ash, Walnut
Magnetic Shielding	Yes
Grille	Detachable black cloth
Terminal Type	5-way binding posts
Warranty	2 years
Placement	Bookshelf or stand
Bi-wiring / Bi-amping	Supported via removable jumpers

Frequently Asked Questions - TSS-76G Taga Harmony

What is the best placement for the TSS-76G speakers?

For optimal sound, place the speakers on a sturdy bookshelf or dedicated stands at ear level. Keep them at least 20 cm from walls to avoid bass boom.

Do the speakers require a break-in period?

Yes, new speakers benefit from a break-in period of about 20-50 hours at moderate volume to achieve the best sound quality.

What amplifier power is recommended for the TSS-76G?

An amplifier with 20-100 Watts per channel is recommended. Ensure the impedance is 8 Ohms.

How should I clean the speaker cabinets?

Wipe with a soft, dry cloth. Avoid moisture and abrasive cleaners that may damage the finish.

Can I bi-wire or bi-amp these speakers?

Yes, the TSS-76G has four binding posts with removable jumpers, allowing bi-wiring or bi-amping.

What is the impedance of the TSS-76G?

The nominal impedance is 8 Ohms, which is compatible with most home audio amplifiers.

Are these speakers magnetically shielded?

Yes, they are magnetically shielded, so they can be placed near a TV or monitor without causing interference.

What type of speaker wire should I use?

Use high-quality speaker wire with a gauge of 14 to 16 AWG. Ensure proper polarity when connecting.

Can I mount the TSS-76G on a wall?

These speakers are designed for bookshelf or stand use. Wall mounting is not recommended without a compatible bracket that fits the enclosure.

What is the warranty period for Taga Harmony speakers?

Taga Harmony typically offers a 2-year warranty against manufacturing defects. Check your local dealer for details.

USER MANUAL TSS-76G Taga Harmony

Installation

TAGA EUROPE:
POLPAK POLAND Sp. z o.o.
AL. JEROZOLIMSKIE 331A
05-816 REGUŁY k/WARSZAWY
POLAND

TAGA

HARMONY

TSS-60G/TSS-76G/TSS-96G

SPEAKER STANDS

Instruction Manual

www.Tagaharmony.com

Edition 08-2023

Package content

B1x2		B2x2		B3x2
G1x2		A1x2		A2x2
A3x2		A4x8		A5x8
A6x1		A7x8

Installation

The installation shown for 1 speaker stand.

As safety precautions to avoid tip-over of the stand and the speaker we recommend:

- to anchor the stand to the wall or other permanent construction.

- to anchor the speaker to the upper base of the stand.

Note! Anchoring devices should be purchased separately and are not delivered with this product.

Simple line drawing of a vertical cylindrical object mounted on a square base (no text or symbols)

Technical line drawing of a stand with a square base and circular top, labeled B3 (no text or symbols beyond label)