Aria UMA-1200 - Camera Koblenz - Free user manual and instructions

Product Type	Digital Camera
Brand	Koblenz
Model	Aria UMA-1200
Dimensions (approx.)	100 x 60 x 30 mm
Weight (approx.)	150 g
Power Supply	Rechargeable Li-ion battery
Image Sensor	8 MP CMOS
Optical Zoom	4x
Display	2.7-inch LCD
Storage Media	SD/SDHC card (up to 32 GB)
Connectivity	USB 2.0, HDMI output
Video Recording	720p HD at 30 fps
Battery Life (approx.)	200 shots
Warranty	1 year
Included Accessories	USB cable, battery, wrist strap, lens cap
Cleaning	Use a soft dry cloth; avoid solvents
Safety	Keep away from water and extreme temperatures
Spare Parts Availability	Contact Koblenz support or authorized dealers

Frequently Asked Questions - Aria UMA-1200 Koblenz

How do I turn on the camera?

Press and hold the Power button located on the top of the camera until the lens extends and the screen turns on.

What type of memory card does the camera use?

The camera supports SD and SDHC memory cards up to 32 GB. Insert the card with the gold contacts facing the front of the camera.

How do I charge the battery?

Use the included USB cable to connect the camera to a computer or a USB wall charger. The charging indicator light will turn on.

Can I use the camera while it is charging?

No, it is recommended to turn off the camera during charging to ensure proper charging and avoid overheating.

How do I transfer photos to my computer?

Connect the camera to your computer using the USB cable. The camera will appear as a removable drive. Drag and drop the files from the DCIM folder.

What should I do if the camera does not power on?

Ensure the battery is charged. If it doesn't turn on, try removing and reinserting the battery or resetting by pressing the reset button (if available) with a paperclip.

How do I set the date and time?

Go to Menu > Setup and select Date/Time. Use the arrow buttons to adjust and press OK to confirm.

What is the maximum video resolution?

The camera can record 720p HD video at 30 frames per second. Select video mode from the mode dial and choose resolution in the menu.

How do I clean the lens?

Use a soft, lint-free cloth designed for lenses. Gently wipe in a circular motion. Do not use paper towels or harsh chemicals.

Where can I find replacement parts or accessories?

Contact Koblenz customer support or visit an authorized dealer. Spare batteries, chargers, and USB cables are commonly available.

USER MANUAL Aria UMA-1200 Koblenz

Discover more products: www.koblenz.com

PRINTED IN CHINA / IMPRESO EN CHINA

A

Koblenz®

Titán

Lightweight Upright Vacuum Cleaner

Barredora Ultraligera

For model / Para modelo: UMA-1400

You have just purchased a Koblenz® Upright. Please read this manual carefully before operating the machine. Model and serial number may be found on the back of your vac. You should record both model and serial numbers and keep them in a safe place for future use. Keep this manual.

Felicidades!

Read all instructions before using this upright.

Important safety instructions....1

Warning....1

Polarized outlet....2

Your upright vacuum cleaner components....2

Upright vacuum cleaner assembly....3

How to operate....4

Accessories available	5
Upright vacuum cleaner cleaning	6
Maintenance	7
Troubleshooting	9
Warranty	9

IMPORTANT SAFETY INSTRUCTIONS

- This upright vacuum cleaner is for household use only.

Read all instructions before using this upright vacuum cleaner.

WARNING: The power cord on this product contains lead, a chemical known to cause birth defects or other reproductive harms. Wash hands after handling.

Save these instructions

WARNING

TO REDUCE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

1. Please read the instructions in this manual carefully before operating the upright vacuum cleaner for safe use.

2. To prevent the risk of electric shock, do not use the vacuum cleaner on wet surfaces or outdoors.

3. Attention should be paid when the upright vacuum cleaner is used near children.

Do not allow children to use the vacuum cleaner as a toy.

1. This upright vacuum is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the upright vacuum cleaner by a responsible person. Children must be supervised to ensure that they do not play with the upright vacuum cleaner.

2. Keep hair, loose clothing, fingers, or other body parts away from moving parts and openings.

3. This upright vacuum cleaner is for household use only and not for commercial or industrial use.

4. Never use the upright vacuum cleaner without the filters.

5. Do not vacuum lit cigarettes, hot ashes, razor blades, or sharp items.

6. It is not recommended to use extension cords.

7. Keep the upright vacuum cleaner away from stoves or heat sources.

8. Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

9. If the line cord is damaged, it must be replaced by the manufacturer or an authorized service center.

10. If the upright vacuum cleaner does not work correctly, if it has been left outdoors or water has entered, take the device to an Authorized Technical Service for it to be checked and repaired.

11. Take special care when cleaning stairs.

12. Disconnect the upright vacuum cleaner before proceeding to clean or change the filters.

13. Never immerse the appliance, plug, or cord in water or any other liquid.

14. Keeping the filters clean ensures efficient operation. If you notice a reduction in suction, check the condition of the filters. Avoid vacuuming oiled elements as this deteriorates the filters.

15. Store the upright vacuum cleaner in a clean place.

16. Do not use the upright vacuum cleaner if any opening is blocked, it will cause overheating that can damage the unit.

17. Do not move the by cord or the suction tube. Use the handle.

18. Before using the upright vacuum cleaner for the first time, check that all packaging items have been removed.

19. NOTE: It is recommended not to vacuum construction materials such as sand, lime, cement, plaster, etc. because they would totally clog the engine filter and micro filter and cause severe engine damage. If so, clean or replace such filters immediately after use.

This appliance is for use on a 120 V\~ circuit, and has a polarized plug as shown in figure a. A temporary adapter may be used to connect this plug to Non-polarized outlet. The temporary adapter should be used only until a properly polarized outlet can be installed by a qualified electrician.

NOTE:

In Canada, the use of a temporary adapter is not permitted by the Canadian Electrical Code.

1. Pet Turbo Brush
2. Dust container release button
3. Dust container handle
4. Dust cup filter cover
5. Air outlet filter cover
6. Wheels
7. Floor brush
8. On/Off switch
9. Hose handle
10. Power cord
11. Power cord holder
12. Hose hook
13. Handle
14. Accesory holder
15. 3 in 1 accessory

UPRIGHT VACUUM CLEANER ASSEMBLY

Remove the dust cup before installing the handle. Insert the handle into the body of the upright vacuum cleaner, then place the screw and screw into the body as shown in the figure.
IMPORTANT: The handle must be inserted first before replacing the dust cup.

Put the dust container back in place by pressing until you hear a click.

Open the connector hose cap and insert the hose. Insert the other end of the hose into the unit and turn clockwise to block.

Insert the 3-in-1 accessory into the specially designed holder, as shown in the figure.

Install the Pet Turbo Brush holder into the guides. Once the guides are aligned in the corresponding cavity, press until the locks on the back side snap into place.

Place the Pet Turbo Brush in its holder by aligning the bottom hook with the accessory, then press against the holder.

HOW TO OPERATE

Release the cord by rotating the upper cord hook and plug the upright vacuum cleaner into the mains supply.

Place a foot gently on the corner of the brush head cover and pull handle backwards to release the handle.

Press the ON/OFF switch to start the upright vacuum cleaner working.

The unit has five possible settings for different types of floors, from hard floors (ceramic, mosaic, porcelain, wood) and carpets, from low (moquette type) to high-pile carpets. When you adjust the height of the equipment, it must be in a vertical position.

Remove the hose handle from its socket. The handle can be used immediately with the addition of the accessories provided.

Do not overfill the dust cup, this will clog the filter.

ACCESSORIES AVAILABLE

3 in 1 Accessory: Crevice, Dusting brush and pick up tool

Can be used to clean furniture, lampshades, book shelves and removes pet hair.

To attach nozzled: Attach the required accessory to the bottom end of the telescopic wand or if necessary directly to the hose handle. Clean accessories after use to keep them in good working condition.

Crevice nozzle
Use to clean hard to reach places. Such as: corners, cracks, etc.

Pick up tool
For sofa, mattresses, upholstery, remove dust from delicate surfaces.

Dusting brush
For sofa, bookshelf, curtain and furniture, etc.

Pet Turbo Brush

It has an air-powered roller brush for cleaning pet hair from your carpets, upholstery, car interiors, and more.

1. To open the Pet Turbo Brush accessory and perform internal cleaning: rotate, unlock and remove the plastic ring closure

1. Pull the upper plastic cover of the Pet Turbo Brush accessory as shown in the figure.

1. Remove any blockage or remains and carefully, without damaging the gears or belt, cut away any build-up of hair around the brushroll with scissors.

Tools	Cleaning area
	Floor & carpets	Furniture	Between cushions	Curtains	Stairs	Walls	Skirting edges	Pet hair
Floor head	●
Crevice tool		●	●		●		●
Pick up tool		●		●	●		●	●
Brush tool		●		●	●	●
Pet Turbo-Brush	●	●		●	●			●

UPRIGHT VACUUM CLEANER CLEANING

1. Press the dust cup release button to remove dust residue.

2. Hold the dust cup over a waste basket and press the latch to release the bottom cover. The waste will be emptied.

3. Close the bottom cover until it clicks.

1. Open the dust cup filter cover, located on top of the dust cup.

1. Remove the foam insert from the holder.

1. Wash and rinse the filter well in warm water until it is clean.

1. Lift the filter holder, remove the foam filter and shake to remove dust frequently. Every three months rinse the filters and dry them completely.

8. Reinstall the foam filter, filter support and pre-motor filter.
DO NOT operate without filters installed.
DO NOT wash the dust cup in a dishwasher
DO NOT reinstall filters until they are completely dry.

WARNING:
Make sure unit is upright and turned off when removing filters.

1. Locate and unlock the filter cover as in the figure. Press left to unlock, right to lock.
2. Open the cover up and remove the filter.
3. Gently tap the filter over a waste basket, removing dirt and remains.
4. Wash the filter using warm water until it looks clean. Air dry the filter thoroughly for 24 h before using again. Do not use a hair dryer or other heat drying method.

MAINTENANCE

To ensure that your vacuum cleaner works at optimum efficiency, empty the dust container and wash the air filters regularly.

Switch off and disconnect from main power supply before carrying out maintenance.

DO NOT clean the vacuum cleaner, its components or accessories using petroleum derivatives or other flammable liquids or solvents. Clean only the outside of the vacuum cleaner body.

Use only a damp cloth with a mild detergent to clean the vacuum cleaner, components and accessories.

After cleaning, go over removing moisture with a dry cloth. DO NOT place accessories, tools or components in a dishwasher.

Turn the vacuum upside down, with the brushes facing up. Gently remove any string, cord, fur, hair, or debris that may be wrapping the brushroll. To clean you can use a tool such as a small knife, trench or scissors to cut and remove any accumulation of hair, hair including threads that are wrapped around the rotating bristle brush.

Check your rotary brush and belts for damage and wear. Clean the brush and especially its ends by removing any threads, cords and carpet fibers. These can wrap around the brush and prevent its effectiveness in cleaning. Also remove any debris that may have accumulated under the brush cover.

1. Remove the 7 (seven) screws as in the figures below, with a screwdriver.

2. Raise the brush cover. 3. Remove brush by grasping both ends.

ENSAMBLE DE LA BARREDORA

Clean strings, hair and any other debris from brush, motor belt and motor pulley.

1. Check brush wear and replace brush if necessary. Check the air passage for obstructions, remove any debris from this area.

1. When this cleaning is finished, reposition the brush and the belt. Manually turn the brush a few times in the direction of the motor pulley, checking that everything rotates freely.

If everything has been properly reinstalled, the belt will line up correctly with the brush. Replace the cover and reinstall the 7 (seven) screws.

Check for belt wear, cuts, and cracks. If it looks bad, you'll need to replace it. To remove the strap read the instructions below accordingly and follow the instructions.

1. Remove the 7 (seven) screws as in the figures below, with a screwdriver.

1. Pull old belt off from motor shaft. 3

Thread the new belt over the motor shaft and stretch the other end over the brush into the space between the brush bristles.

1. Place the ends of the rotating brush into the side slots as illustrated.

1. Manually rotate the brush a few times in the direction of the motor shaft. If everything has been properly reinstalled, the belt will align itself with the brush.

1. Place the brush cover and reinstall the seven screws.

TROUBLESHOOTING

THE UPRIGHT VACUUM CLEANER DOES NOT START:
POSSIBLE REASONS SOLUTIONS
1. Upright vacuum cleaner is not plugged into power source.2. Installation fuse blown, switch or circuit breaker tripped.	1. Check the power tab.2. Check/replace fuse or reset switch or circuit breaker.
THE UPRIGHT VACUUM CLEANER DOES NOT PICK UP DIRT:
POSSIBLE REASONS SOLUTIONS
1. The powder container is full.2. Filters need cleaning.3. The hose has not been properly placed.4. Dust container not in place.5. Suction line is clogged.6. Broken rotary brush belt.7. Brushroll belt stretched or blocked.8. Worm roller brush bristles.9. Rotary brush tangled/blocked.	1. Empty the dust container.2. Check, remove debris or clean.3. Check and make sure the hose is properly positioned and connected at both ends.4. Make sure the dust cup is fully inserted and the handle is properly attached.5. Visually inspect the air passage, hose inlet, and the hose itself for an obstruction. If there is, remove it carefully so as not to damage the parts.6. Replace belt.7. Check that the strap is not blocked. Replace belt if necessary.8. Replace brush roll.9. Remove brush roll and clean debris from brush. Check that the strap is not damaged.

WARRANTY

This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.

This product is warranted against malfunctions and defects in material and workmanship for a period of one year for domestic use.

THIS WARRANTY SHALL NOT APPLY to any products or parts there of which have been damaged by tampering, misuse or abuse or which have been altered or repaired by an unauthorized person or service center.

THIS WARRANTY SHALL NOT APPLY to brushes or accessories since their life depends upon the amount of use.

FOR REPAIR The inoperative must be delivered with shipping and delivery charges prepaid together with satisfactory evidence of the purchase date to the dealer from whom it was purchased or authorized service center. Koblenz will either repair or replace, at its election, all defective machines during the warranty period.

The foregoing obligations are in lieu of all other obligations and liabilities including negligence and state Koblenz's entire and exclusive liability and purchaser's exclusive remedy. Koblenz will in no event be liable for any direct, indirect, special, incidental or consequential damages or losses which liability is claimed.

Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusión may not apply to you.

Thorne Electric, Co. Koblenz Eléctrica, S.A. de C.V.

P.O. BOX 18363,San Antonio, TX.78218-0363 U.S.A.Tel: [phone]Fax: [phone] [phone]

Av. Ciencia No. 28,Parque Industrial CuamallaCuautitlán Izcalli, Edo, de México,México, C.P. 54730 Tel. [phone]

CONTENIDO